Right now, there is no easy/intuitive way to find out whether a node
might have vanished. This commit adds the time when a node was last seen
to the originator table output, so that a common user is able to tell
whether a node might have gone without having to wait PURGE_TIMEOUT
seconds until that node gets "garbe-collected".
It also puts the the versioning information in an extra line, as
the first one of this debug output would otherwise get too long.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is not need to depend on it as procfs support was removed during the
transition to sysfs.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must use the user supplied information about how the code should be
compiled instead of always trying to build it as module.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The debugfs files are initialized at load time only but would get
deinitialized when the module changed in it deactivate (sleeping)
state. As a consequence the debugfs files are not accessible
anymore.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We include different header files indirectly to the same source file.
This creates weird compiler errors from time to time. Include guards
should prefend that functions/variables/... gets redefined by itself.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The new versioning scheme looks like this:
* the trunk will simply be named "devel" followed by a revision number
* the upcoming release branch will be "maint" followed by a revision
number
* the releases will carry their respective names (e.g. 2010.0.0)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is enough for our timeouts to keep them in seconds instead of miliseconds.
With a too high resolution, we might even risk an integer overflow, so this
patch should make things more safe.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the current default values, this patch is not critical, as
LOCAL_HNA_TIMEOUT is a multiple of 1000 anyway. However, if someone
would like to change this #define, the person could have some
unexpected rounding issues. Therefore doing the multiplication before
the division now.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Useless but meaningfull patch that converts JavaStyle names into c_style
Signed-off-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All of the board 32-bit registers and 8-bit i2c registers are either read before
writing to them or they are just written to with a new value. There is no reason
to keep a 'local' copy of any of them.
As a first step to removing them, get rid of all the ones that are not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Where used, dereference the global symbol dt3155_status[] as a local
pointer. This improves the readability of the code and reduces the
overall length of some of the really long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix 56 undefined references to snd_*() functions. First 5 are:
drivers/built-in.o: In function `solo_g723_exit':
(.text+0xa4a4aa): undefined reference to `snd_card_free'
drivers/built-in.o: In function `solo_snd_pcm_init':
solo6010-g723.c:(.text+0xa4a677): undefined reference to `snd_pcm_new'
solo6010-g723.c:(.text+0xa4a6b1): undefined reference to `snd_pcm_set_ops'
solo6010-g723.c:(.text+0xa4a74d): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o: In function `solo_g723_init':
(.text+0xa4a7f6): undefined reference to `snd_card_create'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ben Collins <bcollins@bluecherry.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The spectra driver doesn't compile with today linux-next
The problem is that it tries to use a blk_fs_request macro. Searching
for this macro I saw that it used to exist in linux/blkdev.h as
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
This patch solves the issue eliminating the unnecessary (and now inexistent) wrapper
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes up many coding style issues in adv_pci_dio.c found by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned char type.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned short type.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned long type, except for pointer fields that
should be u32 in packed structures and 8-byte-aligned 8 byte long structure
QWORD.
Thanks to Jiri Slaby for pointing out that simply replacing by unsigned long is
wrong on x86-64 arch.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The global symbol dt3155_fbuffer[], declared in dt3155_isr.c, is really
just a pointer to dt3155_status[].fbuffer. To improve readability, make
some of the really long lines shorter, and make the buffer access more
consistent, use &dt3155_status[].fbuffer to access the buffer structure.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/built-in.o: In function `wlan_free_wiphy':
(.text+0x3f5eb5): undefined reference to `wiphy_unregister'
drivers/built-in.o: In function `wlan_free_wiphy':
(.text+0x3f5ec4): undefined reference to `wiphy_free'
drivers/built-in.o: In function `wlan_create_wiphy':
(.text+0x3f5f76): undefined reference to `wiphy_new'
drivers/built-in.o: In function `wlan_create_wiphy':
(.text+0x3f6024): undefined reference to `wiphy_register'
drivers/built-in.o: In function `prism2_roamed':
(.text+0x3f61f7): undefined reference to `cfg80211_roamed'
drivers/built-in.o: In function `prism2_disconnected':
(.text+0x3f6223): undefined reference to `cfg80211_disconnected'
drivers/built-in.o: In function `prism2_connect_result':
(.text+0x3f626d): undefined reference to `cfg80211_connect_result'
drivers/built-in.o: In function `prism2_connect':
(.text+0x3f62b6): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6679): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6873): undefined reference to `__ieee80211_get_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f68cc): undefined reference to `cfg80211_inform_bss'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6942): undefined reference to `cfg80211_scan_done'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix 49 zram build errors in one swoop. Examples:
drivers/staging/zram/zram_drv.c:225: error: dereferencing pointer to incomplete type
drivers/staging/zram/zram_drv.c:226: error: implicit declaration of function 'bio_for_each_segment'
drivers/staging/zram/zram_drv.c:226: error: expected ';' before '{' token
drivers/staging/zram/zram_drv.c:281: error: implicit declaration of function 'bio_endio'
drivers/staging/zram/zram_drv.c:285: error: implicit declaration of function 'bio_io_error'
drivers/staging/zram/zram_drv.c:545: error: implicit declaration of function 'set_capacity'
drivers/staging/zram/zram_drv.c:548: error: implicit declaration of function 'queue_flag_set_unlocked'
drivers/staging/zram/zram_drv.c:548: error: 'QUEUE_FLAG_NONROT' undeclared (first use in this function)
drivers/staging/zram/zram_drv.c:548: error: dereferencing pointer to incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup, removed custom macro to compare Ethernet addresses.
Some checkpatch warnings on indentation were not resolved.
The return value of compare_ether_addr was reversed, something to consider.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Kconfig + Makefile for TI's DSP Bridge driver
and expose it to the staging menu.
For now, have tidspbridge depend on ARCH_OMAP3.
That dependency should be relaxed as soon as required cleanups are applied.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Kanigeri, Hari <h-kanigeri2@ti.com>
Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Guzman Lugo, Fernando <fernando.lugo@ti.com>
Signed-off-by: Hebbar, Shivananda <x0hebbar@ti.com>
Signed-off-by: Ramos Falcon, Ernesto <ernesto@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Anna, Suman <s-anna@ti.com>
Signed-off-by: Gupta, Ramesh <grgupta@ti.com>
Signed-off-by: Gomez Castellanos, Ivan <ivan.gomez@ti.com>
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Armando Uribe De Leon <x0095078@ti.com>
Signed-off-by: Deepak Chitriki <deepak.chitriki@ti.com>
Signed-off-by: Menon, Nishanth <nm@ti.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a README with a general overview of TI's DSP Bridge driver,
a short explanations of how error codes are currently used,
and a CONTRIBUTORS file with all past & present contributors.
For additional information about TI's DSP Bridge,
check out http://omapzoom.org/gf/project/omapbridge/docman/?subdir=3
Note: if by any chance we forgot to mention any contributor,
please let us know and we will fix that.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Kanigeri, Hari <h-kanigeri2@ti.com>
Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Guzman Lugo, Fernando <fernando.lugo@ti.com>
Signed-off-by: Hebbar, Shivananda <x0hebbar@ti.com>
Signed-off-by: Ramos Falcon, Ernesto <ernesto@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Anna, Suman <s-anna@ti.com>
Signed-off-by: Gupta, Ramesh <grgupta@ti.com>
Signed-off-by: Gomez Castellanos, Ivan <ivan.gomez@ti.com>
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Armando Uribe De Leon <x0095078@ti.com>
Signed-off-by: Deepak Chitriki <deepak.chitriki@ti.com>
Signed-off-by: Menon, Nishanth <nm@ti.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_cs.c file that fixes braces, spaces
parentheses, etc style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_cs.c file that corrects the invalid
UTF-8 encoding style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_cs.c file that converts spaces to
tabs style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The macros ReadMReg and WriteMReg are really just private versions of
the kernel's readl and writel functions. Use the kernel's functions
instead. And since ioremap returns a (void __iomem *) not a (u8 *),
change all the uses of dt3155_lbase to reflect this.
While here, make dt3155_lbase static since it is only used in the
dt3155_drv.c file. Also, remove the global variable dt3155_bbase
since it is not used anywhere in the code.
Where is makes sense, create a local 'mmio' variable instead of using
dt3155_lbase[minor] to make the code more readable.
This change also affects the {Read|Write}I2C functions so they are
also modified as needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replaced and removed the custom definition.
Minor checkpatch warnings on long lines and indentation were not cleared.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed style and debugging printks.
Not replaced PSDevice here, nor removed wireless_send_event() yet.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Finally got ahold of a card with a tw2865 video/audio multiplexer and
the spec sheet to go along with it.
Signed-off-by: Ben Collins <bcollins@bluecherry.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron