Commit ef8b4520bd added one NULL check for
"p" in krealloc(), but that doesn't seem to be enough since there
doesn't seem to be any guarantee that memcpy(ret, NULL, 0) works
(spotted by the Coverity checker).
For making it clearer what happens this patch also removes the pointless
min().
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an obvious use-after-free spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"Luming Yu" <luming.yu@gmail.com> says:
There is a "ttyS1 irq is -1" problem observed on tiger4 which cause the
serial port broken.
It is because that there is __no__ ACPI IRQ resource assigned for the
serial port. So the value of the IRQ for the port is never changed since it
got initialized to -1.
If PNP supplies a valid IRQ, use it. Otherwise, leave port.irq == 0, which
means "no IRQ" to the serial core.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yu Luming <luming.yu@intel.com>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The i5000_edac driver's PCI registration structure has the name
""i5000_edac"" (with extra set of double-quotes) which is probably not
intentional. Get rid of __stringify.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firmware like PNPBIOS or ACPI can report the address space consumed by the
RTC. The actual space consumed may be less than the size (RTC_IO_EXTENT)
assumed by the RTC driver.
The PNP core doesn't request resources yet, but I'd like to make it do so.
If/when it does, the RTC_IO_EXTENT request may fail, which prevents the RTC
driver from loading.
Since we only use the RTC index and data registers at RTC_PORT(0) and
RTC_PORT(1), we can fall back to requesting just enough space for those.
If the PNP core requests resources, this results in typical I/O port usage
like this:
0070-0073 : 00:06 <-- PNP device 00:06 responds to 70-73
0070-0071 : rtc <-- RTC driver uses only 70-71
instead of the current:
0070-0077 : rtc <-- RTC_IO_EXTENT == 8
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The misc_register() error path always released an I/O port region,
even if the region was memory-mapped (only mips uses memory-mapped RTC,
as far as I can see).
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is not a new problem in 2.6.23-git17. 2.6.22/2.6.23 is buggy in the
same way.
Reiserfs could accumulate dirty sub-page-size files until umount time.
They cannot be synced to disk by pdflush routines or explicit `sync'
commands. Only `umount' can do the trick.
The direct cause is: the dirty page's PG_dirty is wrongly _cleared_.
Call trace:
[<ffffffff8027e920>] cancel_dirty_page+0xd0/0xf0
[<ffffffff8816d470>] :reiserfs:reiserfs_cut_from_item+0x660/0x710
[<ffffffff8816d791>] :reiserfs:reiserfs_do_truncate+0x271/0x530
[<ffffffff8815872d>] :reiserfs:reiserfs_truncate_file+0xfd/0x3b0
[<ffffffff8815d3d0>] :reiserfs:reiserfs_file_release+0x1e0/0x340
[<ffffffff802a187c>] __fput+0xcc/0x1b0
[<ffffffff802a1ba6>] fput+0x16/0x20
[<ffffffff8029e676>] filp_close+0x56/0x90
[<ffffffff8029fe0d>] sys_close+0xad/0x110
[<ffffffff8020c41e>] system_call+0x7e/0x83
Fix the bug by removing the cancel_dirty_page() call. Tests show that
it causes no bad behaviors on various write sizes.
=== for the patient ===
Here are more detailed demonstrations of the problem.
1) the page has both PG_dirty(D)/PAGECACHE_TAG_DIRTY(d) after being written to;
and then only PAGECACHE_TAG_DIRTY(d) remains after the file is closed.
------------------------------ screen 0 ------------------------------
[T0] root /home/wfg# cat > /test/tiny
[T1] hi
[T2] root /home/wfg#
------------------------------ screen 1 ------------------------------
[T1] root /home/wfg# echo /test/tiny > /proc/filecache
[T1] root /home/wfg# cat /proc/filecache
# file /test/tiny
# flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback
# idx len state refcnt
0 1 ___UD__Bd_ 2
[T2] root /home/wfg# cat /proc/filecache
# file /test/tiny
# flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback
# idx len state refcnt
0 1 ___U___Bd_ 2
2) note the non-zero 'cancelled_write_bytes' after /tmp/hi is copied.
------------------------------ screen 0 ------------------------------
[T0] root /home/wfg# echo hi > /tmp/hi
[T1] root /home/wfg# cp /tmp/hi /dev/stdin /test
[T2] hi
[T3] root /home/wfg#
------------------------------ screen 1 ------------------------------
[T1] root /proc/4397# cd /proc/`pidof cp`
[T1] root /proc/4713# cat io
rchar: 8396
wchar: 3
syscr: 20
syscw: 1
read_bytes: 0
write_bytes: 20480
cancelled_write_bytes: 4096
[T2] root /proc/4713# cat io
rchar: 8399
wchar: 6
syscr: 21
syscw: 2
read_bytes: 0
write_bytes: 24576
cancelled_write_bytes: 4096
//Question: the 'write_bytes' is a bit more than expected ;-)
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Reviewed-by: Chris Mason <chris.mason@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for version 2 of the ioatdma device. This device handles
the descriptor chain and DCA services slightly differently:
- Instead of moving the dma descriptors between a busy and an idle chain,
this new version uses a single circular chain so that we don't have
rewrite the next_descriptor pointers as we add new requests, and the
device doesn't need to re-read the last descriptor.
- The new device has the DCA tags defined internally instead of needing
them defined statically.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: "Williams, Dan J" <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the field names to marker example format string.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Describes the format string standard further: Use of field names before the
type specifiers..
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Upon module load, we must take the markers mutex. It implies that the marker
mutex must be nested inside the module mutex.
It implies changing the nesting order : now the marker mutex nests inside the
module mutex. Make the necessary changes to reverse the order in which the
mutexes are taken.
Includes some cleanup from Dave Hansen <haveblue@us.ibm.com>.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found a few bugs in the BFS driver. Detailed description of the bugs as
well as the steps to reproduce the errors are given in the kernel bugzilla.
Please follow these links for more information:
http://bugzilla.kernel.org/show_bug.cgi?id=9363http://bugzilla.kernel.org/show_bug.cgi?id=9364http://bugzilla.kernel.org/show_bug.cgi?id=9365http://bugzilla.kernel.org/show_bug.cgi?id=9366
This patch fixes the bugs described above. Besides, the patch introduces
coding style changes to make the BFS driver conform to the requirements
specified for Linux kernel code. Finally, I made a few cosmetic changes
such as removal of trivial debug output.
Also, the patch removes the fields `si_lf_ioff' and `si_lf_sblk' of the
in-core superblock structure. These fields are initialized but never
actually used.
If you are wondering why I need BFS, here is the answer: I am using this
driver in the context of Linux kernel classes I am teaching in the Moscow
State University and in the International Institute of Information
Technology in Pune, India.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Cc: Tigran Aivazian <tigran@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert 62d0df6406.
This was originally intended as a simple initial example of how to create a
control groups subsystem; it wasn't intended for mainline, but I didn't make
this clear enough to Andrew.
The CFS cgroup subsystem now has better functionality for the per-cgroup usage
accounting (based directly on CFS stats) than the "usage" status file in this
patch, and the "load" status file is rather simplistic - although having a
per-cgroup load average report would be a useful feature, I don't believe this
patch actually provides it. If it gets into the final 2.6.24 we'd probably
have to support this interface for ever.
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For administrative purpose, we want to query actual block usage for
hugetlbfs file via fstat. Currently, hugetlbfs always return 0. Fix that
up since kernel already has all the information to track it properly.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
return_unused_surplus_pages() can become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a MAP_SHARED mmap of a hugetlbfs file succeeds, huge pages are reserved
to guarantee no problems will occur later when instantiating pages. If quotas
are in force, page instantiation could fail due to a race with another process
or an oversized (but approved) shared mapping.
To prevent these scenarios, debit the quota for the full reservation amount up
front and credit the unused quota when the reservation is released.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a second parameter 'delta' to hugetlb_get_quota and hugetlb_put_quota to
allow bulk updating of the sbinfo->free_blocks counter. This will be used by
the next patch in the series.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that quota is credited by free_huge_page(), calls to hugetlb_get_quota()
seem out of place. The alloc/free API is unbalanced because we handle the
hugetlb_put_quota() but expect the caller to open-code hugetlb_get_quota().
Move the get inside alloc_huge_page to clean up this disparity.
This patch has been kept apart from the previous patch because of the somewhat
dodgy ERR_PTR() use herein. Moving the quota logic means that
alloc_huge_page() has two failure modes. Quota failure must result in a
SIGBUS while a standard allocation failure is OOM. Unfortunately, ERR_PTR()
doesn't like the small positive errnos we have in VM_FAULT_* so they must be
negated before they are used.
Does anyone take issue with the way I am using PTR_ERR. If so, what are your
thoughts on how to clean this up (without needing an if,else if,else block at
each alloc_huge_page() callsite)?
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hugetlbfs quota management system was never taught to handle MAP_PRIVATE
mappings when that support was added. Currently, quota is debited at page
instantiation and credited at file truncation. This approach works correctly
for shared pages but is incomplete for private pages. In addition to
hugetlb_no_page(), private pages can be instantiated by hugetlb_cow(); but
this function does not respect quotas.
Private huge pages are treated very much like normal, anonymous pages. They
are not "backed" by the hugetlbfs file and are not stored in the mapping's
radix tree. This means that private pages are invisible to
truncate_hugepages() so that function will not credit the quota.
This patch (based on a prototype provided by Ken Chen) moves quota crediting
for all pages into free_huge_page(). page->private is used to store a pointer
to the mapping to which this page belongs. This is used to credit quota on
the appropriate hugetlbfs instance.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugetlbfs implements a quota system which can limit the amount of memory that
can be used by the filesystem. Before allocating a new huge page for a file,
the quota is checked and debited. The quota is then credited when truncating
the file. I found a few bugs in the code for both MAP_PRIVATE and MAP_SHARED
mappings. Before detailing the problems and my proposed solutions, we should
agree on a definition of quotas that properly addresses both private and
shared pages. Since the purpose of quotas is to limit total memory
consumption on a per-filesystem basis, I argue that all pages allocated by the
fs (private and shared) should be charged against quota.
Private Mappings
================
The current code will debit quota for private pages sometimes, but will never
credit it. At a minimum, this causes a leak in the quota accounting which
renders the accounting essentially useless as it is. Shared pages have a one
to one mapping with a hugetlbfs file and are easy to account by debiting on
allocation and crediting on truncate. Private pages are anonymous in nature
and have a many to one relationship with their hugetlbfs files (due to copy on
write). Because private pages are not indexed by the mapping's radix tree,
thier quota cannot be credited at file truncation time. Crediting must be
done when the page is unmapped and freed.
Shared Pages
============
I discovered an issue concerning the interaction between the MAP_SHARED
reservation system and quotas. Since quota is not checked until page
instantiation, an over-quota mmap/reservation will initially succeed. When
instantiating the first over-quota page, the program will receive SIGBUS.
This is inconsistent since the reservation is supposed to be a guarantee. The
solution is to debit the full amount of quota at reservation time and credit
the unused portion when the reservation is released.
This patch series brings quotas back in line by making the following
modifications:
* Private pages
- Debit quota in alloc_huge_page()
- Credit quota in free_huge_page()
* Shared pages
- Debit quota for entire reservation at mmap time
- Credit quota for instantiated pages in free_huge_page()
- Credit quota for unused reservation at munmap time
This patch:
The shared page reservation and dynamic pool resizing features have made the
allocation of private vs. shared huge pages quite different. By splitting
out the private/shared-specific portions of the process into their own
functions, readability is greatly improved. alloc_huge_page now calls the
proper helper and performs common operations.
[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
<debug output from Joel's system>
handling stripe 7629696, state=0x14 cnt=1, pd_idx=2 ops=0:0:0
check 5: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ffcffcc0 written 0000000000000000
check 4: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fdd4e360 written 0000000000000000
check 3: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 2: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 1: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ff517e40 written 0000000000000000
check 0: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fd4cae60 written 0000000000000000
locked=4 uptodate=2 to_read=0 to_write=4 failed=0 failed_num=0
for sector 7629696, rmw=0 rcw=0
</debug>
These blocks were prepared to be written out, but were never handled in
ops_run_biodrain(), so they remain locked forever. The operations flags
are all clear which means handle_stripe() thinks nothing else needs to be
done.
This state suggests that the STRIPE_OP_PREXOR bit was sampled 'set' when it
should not have been. This patch cleans up cases where the code looks at
sh->ops.pending when it should be looking at the consistent stack-based
snapshot of the operations flags.
Report from Joel:
Resync done. Patch fix this bug.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Joel Bertrand <joel.bertrand@systella.fr>
Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When calling get_user_pages(), a write flag is passed in by the caller to
indicate if write access is required on the faulted-in pages. Currently,
follow_hugetlb_page() ignores this flag and always faults pages for
read-only access. This can cause data corruption because a device driver
that calls get_user_pages() with write set will not expect COW faults to
occur on the returned pages.
This patch passes the write flag down to follow_hugetlb_page() and makes
sure hugetlb_fault() is called with the right write_access parameter.
[ezk@cs.sunysb.edu: build fix]
Signed-off-by: Adam Litke <agl@us.ibm.com>
Reviewed-by: Ken Chen <kenchen@google.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove annoying build warnings about unused variables in atmel_serial,
which afflict both AT91 and AVR32 builds.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a DMA device is unregistered, its reference count is decremented twice
for each channel: Once dma_class_dev_release() and once in
dma_chan_cleanup(). This may result in the DMA device driver's remove()
function completing before all channels have been cleaned up, causing lots
of use-after-free fun.
Fix it by incrementing the device's reference count twice for each
channel during registration.
[dan.j.williams@intel.com: kill unnecessary client refcounting]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move pci_dev_put outside the loops in which it occurs. Within the loop,
pci_dev_put is done implicitly by pci_get_device.
The problem was detected using the following semantic patch, and corrected
by hand.
@@
expression dev;
expression E;
@@
- pci_dev_put(dev)
... when != dev = E
- pci_get_device(...,dev)
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pf driver for parallel port floppy drives seems to be broken. At least
with Imation SuperDisk with EPAT chip, the driver calls pi_connect() and
pi_disconnect after each transferred sector. At least with EPAT, this
operation is very expensive - causes drive recalibration. Thus, transferring
even a single byte (dd if=/dev/pf0 of=/dev/null bs=1 count=1) takes 20
seconds, making the driver useless.
The pf_next_buf() function seems to be broken as it returns 1 always (except
when pf_run is non-zero), causing the loop in do_pf_read_drq (and
do_pf_write_drq) to be executed only once.
The following patch fixes this problem. It also fixes swapped descriptions in
pf_lock() function and removes DBMSG macro, which seems useless.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some error paths in txx9spi_probe wrongly return 0. This patch fixes them by
using the devres interfaces.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After 49dce689ad, device_for_each_child
iteration hits the master device itself. Do not call spi_unregister_device()
for the master device.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zillions of people are getting my-battery-monitor-doesnt-work problems
(including me).
Lessen the damage by making ACPI_PROCFS default to on.
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY.
But ia64 registers it as IORESOURCE_MEM only.
In addition, memory hotplug code registers new memory as IORESOURCE_MEM too.
This difference causes a failure of memory unplug of x86-64. This patch
fixes it.
This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI
device.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Luck, Tony" <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We allow violation of bdi limits if there is a lot of room on the system.
Once we hit half the total limit we start enforcing bdi limits and bdi
ramp-up should happen. Doing it this way avoids many small writeouts on an
otherwise idle system and should also speed up the ramp-up.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the getdelays utility to become cgroupstats aware. A new -C option has
been added. It takes in a control group path and prints out a summary of the
states of tasks in the control group
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should unset migrate type "ISOLATE" when we successfully removed memory.
But current code has BUG and cannot works well.
This patch also includes bugfix? to change get_pageblock_flags to
get_pageblock_migratetype().
Thanks to Badari Pulavarty for finding this.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We hit the BUG_ON() in mm/rmap.c:vma_address() when trying to migrate via
mbind(MPOL_MF_MOVE) a non-anon region that spans multiple vmas. For
anon-regions, we just fail to migrate any pages beyond the 1st vma in the
range.
This occurs because do_mbind() collects a list of pages to migrate by
calling check_range(). check_range() walks the task's mm, spanning vmas as
necessary, to collect the migratable pages into a list. Then, do_mbind()
calls migrate_pages() passing the list of pages, a function to allocate new
pages based on vma policy [new_vma_page()], and a pointer to the first vma
of the range.
For each page in the list, new_vma_page() calls page_address_in_vma()
passing the page and the vma [first in range] to obtain the address to get
for alloc_page_vma(). The page address is needed to get interleaving
policy correct. If the pages in the list come from multiple vmas,
eventually, new_page_address() will pass that page to page_address_in_vma()
with the incorrect vma. For !PageAnon pages, this will result in a bug
check in rmap.c:vma_address(). For anon pages, vma_address() will just
return EFAULT and fail the migration.
This patch modifies new_vma_page() to check the return value from
page_address_in_vma(). If the return value is EFAULT, new_vma_page()
searchs forward via vm_next for the vma that maps the page--i.e., that does
not return EFAULT. This assumes that the pages in the list handed to
migrate_pages() is in address order. This is currently case. The patch
documents this assumption in a new comment block for new_vma_page().
If new_vma_page() cannot locate the vma mapping the page in a forward
search in the mm, it will pass a NULL vma to alloc_page_vma(). This will
result in the allocation using the task policy, if any, else system default
policy. This situation is unlikely, but the patch documents this behavior
with a comment.
Note, this patch results in restarting from the first vma in a multi-vma
range each time new_vma_page() is called. If this is not acceptable, we
can make the vma argument a pointer, both in new_vma_page() and it's caller
unmap_and_move() so that the value held by the loop in migrate_pages()
always passes down the last vma in which a page was found. This will
require changes to all new_page_t functions passed to migrate_pages(). Is
this necessary?
For this patch to work, we can't bug check in vma_address() for pages
outside the argument vma. This patch removes the BUG_ON(). All other
callers [besides new_vma_page()] already check the return status.
Tested on x86_64, 4 node NUMA platform.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It appears we overlooked support for removing generic proc files
when we added support for multiple proc super blocks. Handle
that now.
[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following is an extra entry to enable the touch screen on the new LG
C1 EXPRESS DUAL machine.
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the possible usage of a negative value as an array
index spotted by the Coverity checker.
sisfb_validate_mode() could return a negative error code and we must check for
that prior to using its return value as an array index.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a memory leak spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A relatively recent version of the Geode LX datasheet listed the wrong
address for one of the MSRs that controls TFT panels, resulting in
breakage. This patch corrects the MSR address.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Forbid user from changing file flags on quota files. User has no bussiness
in playing with these flags when quota is on. Furthermore there is a
remote possibility of deadlock due to a lock inversion between quota file's
i_mutex and transaction's start (i_mutex for quota file is locked only when
trasaction is started in quota operations) in ext3 and ext4.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: LIOU Payphone <lioupayphone@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Attached patch fixes two compilation problems of s1d13xxxfb.c:
- Fixes outdated dbg() message to fix compilation error with debugging enabled.
- Do not read kernel command line options when compiled as module.
Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I boot with the 'quiet' parameter, I see on the screen:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 39.036026] Initializing cgroup subsys cpuacct
[ 39.036080] Initializing cgroup subsys debug
[ 39.036118] Initializing cgroup subsys ns
This patch lowers the priority of those messages, adds a "cgroup: " prefix
to another couple of printks and kills the useless reference to the source
file.
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pud_clear wasn't setting the _PAGE_NEWPAGE bit, fooling tlb_flush into
thinking that this area of the address space was up-to-date and not unmapping
whatever was covered by the pud.
This manifested itself as ldconfig on x86_64 complaining about the first
library it looked at not being a valid ELF file. A config file is mapped at
0x4000000, as the only thing mapped under its pud, and unmapped. The
unmapping caused a pud_clear, which, due to this bug, didn't actually unmap
the config file data on the host. The first library is then mapped at the
same location, but is not actually mapped on the host because accesses to it
cause no page faults. As a result, ldconfig sees the old config file data.
[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stupid bug - we need to compare the return value of recvmsg to the value of
iov_len, not its size. This caused port_helper processes not to be killed on
shutdown on x86_64 because the pids weren't being passed out properly.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instruction pointer returned by profile_pc() can be a random value. This
break the assumption than we can safely set struct op_sample.eip field to a
magic value to signal to the per-cpu buffer reader side special event like
task switch ending up in a segfault in get_task_mm() when profile_pc()
return ~0UL. Fixed by sanitizing the sampled eip and reject/log invalid
eip.
Problem reported by Sami Farin, patch tested by him.
Signed-off-by: Philippe Elie <phil.el@wanadoo.fr>
Tested-by: Sami Farin <safari-kernel@safari.iki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variables that are only used in #ifdef CONFIG_X86 should also only be
declared there.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
chipsfb uses PCI interfaces and should depend on PCI.
CC drivers/video/chipsfb.o
drivers/video/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/chipsfb.c:378: error: implicit declaration of function 'pci_request_region'
drivers/video/chipsfb.c:435: error: implicit declaration of function 'pci_release_region'
make[2]: *** [drivers/video/chipsfb.o] Error 1
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2
!CONFIG_PCI causes the build to fail.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The max_user_freq member is not really meant for RTC drivers to modify, so
update the rtc documentation so drivers writers know what is expected of
them when handling periodic events.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
symlinks to directories in the non-O= case were lacking -n, which meant
that, when the link already existed, a new link pointing at itself was
created in the target directory.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mac80211 has a reference to __bitmap_empty() via bitmap_empty(). In
lib/bitmap.c this is flagged with an EXPORT_SYMBOL(), but this is
ultimately ineffective due to bitmap.o being linked in lib-y, resulting in:
ERROR: "__bitmap_empty" [net/mac80211/mac80211.ko] undefined!
Moving bitmap.o to obj-y fixes this up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk