dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

394 Commits

Author SHA1 Message Date
Ben Dooks d150a4bbd0 I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device.
Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller
to ensure that it can be autoloaded on the S3C2440 systems that
we support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-01 14:30:38 +01:00
Ben Dooks 63f5c2891e I2C: S3C2410: Fixup error codes returned rom a transfer.
The driver should be returning -ENXIO for transfers that do not
pass the initial address byte stage.

Note, also small tidyups to the driver comments in the area.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-01 14:30:37 +01:00
Ben Dooks 2709781be6 I2C: S3C2410: Check ACK on byte transmission
We should check for the reception of an ACK after transmitting each
data byte. The address send has been correctly checking this, but the
data write byte state should have also been checking for these failures.

As part of the same fix, we remove the ACK checking from the receive
path where it should not have been checking for an ACK which our hardware
was sending.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-01 14:30:37 +01:00
Jean Delvare 875b0a473c i2c-amd756: Fix functionality flags
The i2c-amd756 driver pretends to support SMBus process call
transactions but actually does not. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-18 20:49:41 +02:00
Jean Delvare 08851d6eb4 i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert
There is a strange chip at 0x2e on the second SMBus channel of the
DFI Lanparty NF4 Expert motherboard. Accessing the chip reboots the
system. As there's nothing interesting on this SMBus channel, the
easiest and safest thing to do is to disable it on that board.

This is a better fix to bug #5889 than the it87 driver update that was
done originally:
http://bugzilla.kernel.org/show_bug.cgi?id=5889

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-18 20:49:40 +02:00
Sergei Shtylyov 8e07c2c6af [MIPS] Alchemy: SMBus resource fix
The Alchemy platform code registers the SMBus device using the virtual
address of its registers instead of the physical one -- fix this, taking
into account that actually the whole megabyte is decoded by any of the
programmable serial controllers (one of which is SMBus), and that all the
Alchemy peripherals are directly mappable into KSEG1 kernel space and
therefore ioremap() call would just boil down to CKSEG1ADDR() invocation.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-05-12 16:46:50 +01:00
Maciej W. Rozycki b11a9d8392 i2c-sibyte: Mark i2c_sibyte_add_bus() as static
The i2c_sibyte_add_bus() function is not called, nor meant to, from 
outside, so mark it as static; fixing a sparse warning too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:05 +02:00
Maciej W. Rozycki b3eb5a0bc3 i2c-sibyte: Correct a comment about frequency
The frequency may have been once hardcoded to 100 kHz, but currently it is
passed as an argument to i2c_sibyte_add_bus(), so update the comment to
match code.  While at it, reformat a nearby comment for consistency.  No
functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:05 +02:00
Jean Delvare c2fc54fcd3 i2c-piix4: Blacklist two mainboards
We had a report that running sensors-detect on a Sapphire AM2RD790
motherbord killed the CPU. While the exact cause is still unknown,
I'd rather play it safe and prevent any access to the SMBus on that
machine by not letting the i2c-piix4 driver attach to the SMBus host
device on that machine. Also blacklist a similar board made by DFI.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:05 +02:00
David Milburn b1c1759cd1 i2c-piix4: Increase the intitial delay for the ServerWorks CSB5
Per the PIIX4 errata, there maybe a delay between setting the
start bit in the Smbus Host Controller Register and the transaction
actually starting. If the driver doesn't delay long enough, it
may appear that the transaction is complete when actually it
hasn't started, this may lead to bus collisions.

While 1 ms appears to be enough for most chips, the ServerWorks CSB5
wants 2 ms.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:05 +02:00
Jon Smirl f5fff3602a i2c-mpc: Compare to NO_IRQ instead of zero
Alter the mpc i2c driver to use the NO_IRQ symbol instead of the constant
zero when checking for valid interrupts. NO_IRQ=-1 on ppc and NO_IRQ=0 on
powerpc so the checks against zero are not correct.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:04 +02:00
Jean Delvare 3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00
Jean Delvare ee56d97742 i2c-amd756-s4882: Fix an error path
If initialization fails, we want to restore the physical bus, not delete
it again.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29 23:11:38 +02:00
Jean Delvare 1842cc2eeb i2c-sis5595: Minor cleanups in sis5595_access
* Remove commented-out code.
* Use dev_warn instead of printk.
* Remove a legacy comment.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29 23:11:38 +02:00
Jean Delvare 3578a0759e i2c-piix4: Minor cleanups
* Remove a needless include.
* Remove a legacy comment in piix4_access.
* Minor optimization in piix4_access.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29 23:11:37 +02:00
Jean Delvare c5d21b7fb7 i2c: Spelling fix (successful)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29 23:11:37 +02:00
Jean Delvare 85d6931cde i2c-stub: No newline in parameter description
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-29 23:11:37 +02:00
Kay Sievers add8eda7f2 i2c: Fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable I2C platform drivers, to allow module auto loading.

[ db: add some more drivers ]

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:49 +02:00
Magnus Damm da672773d8 i2c: New driver for the SuperH Mobile I2C bus controller
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master
only driver for the I2C block included in processors such as sh7343,
sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:49 +02:00
Adrian Bunk dec1a998bd i2c/scx200_acb: Don't use 0 as NULL pointer
Don't use 0 as NULL pointer.

Spotted by sparse.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Hans Schillstrom afc13b765e i2c-bfin-twi: Fix mismatch in add timer and delete timer
Move init_completion to just before i2c transfer.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3385

Signed-off-by: Hans Schillstrom <hans.schillstrom@shlsys.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Bryan Wu d4ce220d49 i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN
Simply use "depends on BLACKFIN" (which is technically correct) and just
document which machines have the device.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Mike Frysinger bd584996b0 i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Bryan Wu fa6ad22271 i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Bryan Wu 74d362e0b3 i2c-bfin-twi: Add missing pin mux operation
Blackfin TWI controller hardware pin should be requested from GPIO port controller
Before BF54x, there is no need to do this. But as long as BF54x and BF52x
are supported by this generic driver, the missing pin mux operation should be
added.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Bryan Wu aa3d020917 i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
- Dynamic alloc the resource of TWI driver data according to board information
 - TWI register read/write accessor based on dynamic regs_base
 - Support TWI0/TWI1 for BF54x

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:48 +02:00
Sonic Zhang 4dd39bb12f i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation
- Create a new mode TWI_I2C_MODE_REPEAT.
 - No change to smbus operation.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Wolfram Sang 4c03f68fc4 i2c: Remove trailing whitespaces in busses/Kconfig
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Harvey Harrison 08882d2093 i2c: Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Manuel Lauss a26c20b1fa i2c: Renesas SH7760 I2C master driver
Driver for I2C interfaces in master mode on SH7760.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Sean MacLennan 838349b5c6 i2c-ibm_iic: Support building as an of_platform driver
This patch allows the i2c-ibm_iic driver to be built either as an ocp 
driver or an of_platform driver. This allows it to run under the powerpc 
arch but maintains backward compatibility with the ppc arch.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Sean MacLennan 681aae82c5 i2c-ibm_iic: Change the log levels
Change the log levels based on feedback from linxppc-dev.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Wolfram Sang 244fbbb81c i2c: Add platform driver on top of the new pca-algorithm
Tested on a blackfin.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Wolfram Sang c01b083105 i2c-algo-pca: Extend for future drivers
The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.

Concerning the core struct i2c_algo_pca_data:

- A private data field was added, all hardware dependant data may go here.
  Similar to other algorithms, now a pointer to this data is passed to the
  adapter's functions. In order to make as less changes as possible to the
  ISA-driver, it leaves the private data empty and still only uses its static
  variables.

- A "reset_chip" function pointer was added; such a functionality must come
  from the adapter, not the algorithm.

- use a variable "i2c_clock" instead of a function pointer "get_clock",
  allowing for write access to a default in case a wrong value was supplied.

In the algorithm-file:

- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused

(The state-machine for I2C-communication was not touched.)

In the ISA-driver:

- adapt to new algorithm

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Wolfram Sang 3d4382913f i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
Remove trailing whitespaces to make further patches more readable.  Also remove
an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Russell King adf6d34e46 Merge branch 'omap2-upstream' into devel 2008-04-19 17:17:29 +01:00
Russell King d1964dab60 Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc', 'ns9x', 'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel 2008-04-19 17:17:25 +01:00
eric miao a683b14df8 [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
two reasons:
1. GPIO namings and their mode definitions are conceptually not part
   of the PXA register definitions

2. this is actually a temporary move in the transition of PXA2xx to
   use MFP-alike APIs (as what PXA3xx is now doing), so that legacy
   code will still work and new code can be added in step by step

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
Till Harbaum fa16eefd3e i2c-tiny-usb: New VID/PID pair
I have recently bought some USB PIDs from EZPrototypes for my USB projects
and one will be for the i2c-tiny-usb. I have not yet started to use the new 
one in the official i2c-tiny-usb firmware since i think it makes sense to get 
the change into the kernel before releasing a modified firmware.

This patch adds support for the EZPrototypes USB vid/pid pair used in later
i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up).

Signed-off-by: Till Harbaum <Till@Harbaum.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-11 12:07:05 +02:00
Troy Kisky b73a9aece5 i2c-davinci: Fix lost interrupt
DAVINCI_I2C_STR_REG is a write 1 to clear register,
so don't use a read/modify/write cycle.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-11 12:07:05 +02:00
Paul Mundt 852fb2ac76 i2c-ibm_iic: Fast mode parm desc fixup
Noticed this when grepping for fast mode module params, the i2c-ibm_iic
driver was using a non-existent variable for MODULE_PARM_DESC. Fix it up
to reflect what it's actually supposed to be describing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-11 12:07:04 +02:00
Lennert Buytenhek 8791ed3295 plat-orion: make i2c-mv64xxx available for all Orion families
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27 14:51:40 -04:00
Tony Lindgren f08ac4e794 i2c-omap: Fix unhandled fault
If an I2C interrupt happens between disabling interface clock
and functional clock, the interrupt handler will produce an
external abort on non-linefetch error when trying to access
driver registers while interface clock is disabled.

This patch fixes the problem by saving and disabling i2c-omap
interrupt before turning off the clocks. Also disable functional
clock before the interface clock as suggested by Paul Walmsley.

Patch also renames enable/disable_clocks functions to unidle/idle
functions. Note that the driver is currently not taking advantage
of the idle interrupts. To use the idle interrupts, driver would
have to enable interface clock based on the idle interrupt
and dev->idle flag.

This patch has been tested in linux-omap tree with various omaps.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-03-23 20:28:20 +01:00
Bryan Wu 7084925114 i2c-bfin-twi: Disable BF54x support for now
The i2c-bfin-twi driver doesn't support BF54x for now due to
missing header definitions causing the build to fail. Exclude
it for now, it will be enabled again later.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-03-23 20:28:20 +01:00
Adrian Bunk 5edc68b853 i2c-amd756: Fix off-by-one
This patch fixes an off-by-one error spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-03-12 14:15:00 +01:00
Gaston, Jason D d28dc71121 i2c-i801: Add support for the ICH10
Add the Intel ICH10 SMBus Controller DeviceID's and updates
Tolapai support.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24 20:03:42 +01:00
Christian Krafft 104cb574fe i2c-pca-isa: Add access check to legacy ioports
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel
if there is no device at that port.
This patch adds a check_legacy_ioport call, so probe fails gracefully
and thus prevents the oops.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24 20:03:42 +01:00
Tobias Klauser 305183fc3e i2c: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24 20:03:42 +01:00
Wolfram Sang a92b36ed33 i2c-pxa: Misc fixes
While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.

[JD: Some more fixes.]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Mike Rapoport <mike@compulab.co.il>
Tested-by: Eric Miao <ymiao3@marvell.com>
2008-02-24 20:03:42 +01:00
Holger Schurig d6a7b5f84b [ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c
This fixes two warnings:

* unused static defined function decode_ICR() when
  compiled without CONFIG_I2C_PXA_SLAVE
* a sparse warning about a void function returning
  something

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-17 10:42:07 +00:00