dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

334758 Commits

Author SHA1 Message Date
J. Bruce Fields 836fbadb96 svcrpc: support multiple-fragment rpc's
Over TCP, RPC's are preceded by a single 4-byte field telling you how
long the rpc is (in bytes).  The spec also allows you to send an RPC in
multiple such records (the high bit of the length field is used to tell
you whether this is the final record).

We've survived for years without supporting this because in practice the
clients we care about don't use it.  But the userland rpc libraries do,
and every now and then an experimental client will run into this.  (Most
recently I noticed it while trying to write a pynfs check.)  And we're
really on the wrong side of the spec here--let's fix this.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:24 -05:00
J. Bruce Fields 8af345f58a svcrpc: track rpc data length separately from sk_tcplen
Keep a separate field, sk_datalen, that tracks only the data contained
in a fragment, not including the fragment header.

For now, this is always just max(0, sk_tcplen - 4), but after we allow
multiple fragments sk_datalen will accumulate the total rpc data size
while sk_tcplen only tracks progress receiving the current fragment.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:14 -05:00
J. Bruce Fields 6a72ae2e23 svcrpc: fix off-by-4 error in "incomplete TCP record" dprintk
The full reclen doesn't include the fragment header, but sk_tcplen does.
Fix this to make it an apples-to-apples comparison.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:06 -05:00
J. Bruce Fields ad46ccf094 svcrpc: delay minimum-rpc-size check till later
Soon we want to support multiple fragments, in which case it may be
legal for a single fragment to be smaller than 8 bytes, so we'll want to
delay this check till we've reached the last fragment.

Also fix an outdated comment.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:47:58 -05:00
J. Bruce Fields cc248d4b1d svcrpc: don't byte-swap sk_reclen in place
Byte-swapping in place is always a little dubious.

Let's instead define this field to always be big-endian, and do the
swapping on demand where we need it.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:47:23 -05:00
Bryan Schumaker 6c1e82a4b7 NFSD: Forget state for a specific client
Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:03 -05:00
Bryan Schumaker d7cc431edd NFSD: Add a custom file operations structure for fault injection
Controlling the read and write functions allows me to add in "forget
client w.x.y.z", since we won't be limited to reading and writing only
u64 values.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:02 -05:00
Bryan Schumaker 184c18471f NFSD: Reading a fault injection file prints a state count
I also log basic information that I can figure out about the type of
state (such as number of locks for each client IP address).  This can be
useful for checking that state was actually dropped and later for
checking if the client was able to recover.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:01 -05:00
Bryan Schumaker 8ce54e0d82 NFSD: Fault injection operations take a per-client forget function
The eventual goal is to forget state based on ip address, so it makes
sense to call this function in a for-each-client loop until the correct
amount of state is forgotten.  I also use this patch as an opportunity
to rename the forget function from "func()" to "forget()".

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:00 -05:00
Bryan Schumaker 269de30f10 NFSD: Clean up forgetting and recalling delegations
Once I have a client, I can easily use its delegation list rather than
searching the file hash table for delegations to remove.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:59 -05:00
Bryan Schumaker 4dbdbda84f NFSD: Clean up forgetting openowners
Using "forget_n_state()" forces me to implement the code needed to
forget a specific client's openowners.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:58 -05:00
Bryan Schumaker fc29171f5b NFSD: Clean up forgetting locks
I use the new "forget_n_state()" function to iterate through each client
first when searching for locks.  This may slow down forgetting locks a
little bit, but it implements most of the code needed to forget a
specified client's locks.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:56 -05:00
Bryan Schumaker 44e34da60b NFSD: Clean up forgetting clients
I added in a generic for-each loop that takes a pass over the client_lru
list for the current net namespace and calls some function.  The next few
patches will update other operations to use this function as well.  A value
of 0 still means "forget everything that is found".

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:55 -05:00
Bryan Schumaker 043958395a NFSD: Lock state before calling fault injection function
Each function touches state in some way, so getting the lock earlier
can help simplify code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:54 -05:00
J. Bruce Fields e5f9570319 nfsd4: discard some unused nfsd4_verify xdr code
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:43:51 -05:00
Bryan Schumaker f3c7521fe5 NFSD: Fold fault_inject.h into state.h
There were only a small number of functions in this file and since they
all affect stored state I think it makes sense to put them in state.h
instead.  I also dropped most static inline declarations since there are
no callers when fault injection is not enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 13:01:02 -05:00
Stanislav Kinsbursky 5284b44e43 nfsd: make NFSv4 grace time per net
Grace time is a part of NFSv4 state engine, which is constructed per network
namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:39:47 -05:00
Stanislav Kinsbursky 3d7337115d nfsd: make NFSv4 lease time per net
Lease time is a part of NFSv4 state engine, which is constructed per network
namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:39:46 -05:00
Stanislav Kinsbursky 864aee5c6f nfsd: remove redundant declarations
This is a cleanup patch. Functions nfsd_pool_stats_open() and
nfsd_pool_stats_release() are declared in fs/nfsd/nfsd.h.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:55 -05:00
Stanislav Kinsbursky f141f79d70 nfsd: recovery - make in_grace per net
Flag in_grace is a part of client tracking state, which is network namesapce
aware. So let'a replace global static variable with per-net one.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:54 -05:00
Stanislav Kinsbursky 3a0733692f nfsd: recovery - make rec_file per net
Opening and closing of this file is done in client tracking init and exit
operations.
Client tracking is done in network namespace context already. So let's make
this file opened and closed per network context - this will simlify it's
management.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:53 -05:00
Stanislav Kinsbursky f252bc6806 nfsd: call state init and shutdown twice
Split NFSv4 state init and shutdown into two different calls: per-net one and
generic one.
Per-net cwinit/shutdown pair have to be called for any namespace, generic pair
- only once on NSFd kthreads start and shutdown respectively.

Refresh of diff-nfsd-call-state-init-twice

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:53 -05:00
Stanislav Kinsbursky d85ed44305 nfsd: cleanup NFSd state start a bit
This patch renames nfs4_state_start_net() into nfs4_state_create_net(), where
get_net() now performed.
Also it introduces new nfs4_state_start_net(), which is now responsible for
state creation and initializing all per-net data and which is now called from
nfs4_state_start().

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:52 -05:00
Stanislav Kinsbursky 4dce0ac906 nfsd: cleanup NFSd state shutdown a bit
This patch renames __nfs4_state_shutdown_net() into nfs4_state_shutdown_net(),
__nfs4_state_shutdown() into nfs4_state_shutdown_net() and moves all network
related shutdown operations to nfs4_state_shutdown_net().

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:51 -05:00
Stanislav Kinsbursky 4e37a7c207 nfsd: make delegations shutdown network namespace aware
NFSv4 delegations are stored in global list. But they are nfs4_client
dependent, which is network namespace aware already.
State shutdown and laundromat are done per network namespace as well.
So, delegations unhash have to be done in network namespace context.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:50 -05:00
Stanislav Kinsbursky c9a4962881 nfsd: make client_lock per net
This lock protects the client lru list and session hash table, which are
allocated per network namespace already.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:50 -05:00
Stanislav Kinsbursky ec28e02ca5 nfsd4: remove state lock from nfs4_state_shutdown
Protection of __nfs4_state_shutdown() with nfs4_lock_state() looks redundant.

This function is called by the last NFSd thread on it's exit and state lock
protects actually two functions (del_recall_lru is protected by recall_lock):
1) nfsd4_client_tracking_exit
2) __nfs4_state_shutdown_net

"nfsd4_client_tracking_exit" doesn't require state lock protection, because it's
state can be modified only by tracker callbacks.
Here a re they:
1) create: is called only from nfsd4_proc_compound.
2) remove: is called from either nfsd4_proc_compound or nfs4_laundromat.
3) check: is called only from nfsd4_proc_compound.
4) grace_done; called only from nfs4_laundromat.

nfsd4_proc_compound is called onll by NFSd kthread, which is exiting right
now.
nfs4_laundromat is called by laundry_wq. But laundromat_work was canceled
already.

"__nfs4_state_shutdown_net" also doesn't require state lock protection,
because all NFSd kthreads are dead, and no race can happen with NFSd start,
because "nfsd_up" flag is still set.
Moreover, all Nfsd shutdown is protected with global nfsd_mutex.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:49 -05:00
J. Bruce Fields dba88ba55a nfsd4: remove state lock from nfsd4_load_reboot_recovery_data
That function is only called under nfsd_mutex: we know that because the
only caller is nfsd_svc, via

        nfsd_svc
          nfsd_startup
            nfs4_state_start
              nfsd4_client_tracking_init
                client_tracking_ops->init == nfsd4_load_reboot_recovery_data

The shared state accessed here includes:

        - user_recovery_dirname: used here, modified only by
          nfs4_reset_recoverydir, which can be verified to only be
          called under nfsd_mutex.
        - filesystem state, protected by i_mutex (handwaving slightly
	  here)
        - rec_file, reclaim_str_hashtbl, reclaim_str_hashtbl_size: other
          than here, used only from code called from nfsd or laundromat
          threads, both of which should be started only after this runs
          (see nfsd_svc) and stopped before this could run again (see
          nfsd_shutdown, called from nfsd_last_thread).

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-28 10:13:48 -05:00
J. Bruce Fields a36b1725b3 nfsd4: return badname, not inval, on "." or "..", or "/"
The spec requires badname, not inval, in these cases.

Some callers want us to return enoent, but I can see no justification
for that.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-27 16:41:48 -05:00
J. Bruce Fields 063b0fb9fa nfsd4: downgrade some fs/nfsd/nfs4state.c BUG's
Linus has pointed out that indiscriminate use of BUG's can make it
harder to diagnose bugs because they can bring a machine down, often
before we manage to get any useful debugging information to the logs.
(Consider, for example, a BUG() that fires in a workqueue, or while
holding a spinlock).

Most of these BUG's won't do much more than kill an nfsd thread, but it
would still probably be safer to get out the warning without dying.

There's still more of this to do in nfsd/.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:16 -05:00
J. Bruce Fields ffe1137ba7 nfsd4: delay filling in write iovec array till after xdr decoding
Our server rejects compounds containing more than one write operation.
It's unclear whether this is really permitted by the spec; with 4.0,
it's possibly OK, with 4.1 (which has clearer limits on compound
parameters), it's probably not OK.  No client that we're aware of has
ever done this, but in theory it could be useful.

The source of the limitation: we need an array of iovecs to pass to the
write operation.  In the worst case that array of iovecs could have
hundreds of elements (the maximum rwsize divided by the page size), so
it's too big to put on the stack, or in each compound op.  So we instead
keep a single such array in the compound argument.

We fill in that array at the time we decode the xdr operation.

But we decode every op in the compound before executing any of them.  So
once we've used that array we can't decode another write.

If we instead delay filling in that array till the time we actually
perform the write, we can reuse it.

Another option might be to switch to decoding compound ops one at a
time.  I considered doing that, but it has a number of other side
effects, and I'd rather fix just this one problem for now.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:15 -05:00
J. Bruce Fields 70cc7f75b1 nfsd4: move more write parameters into xdr argument
In preparation for moving some of this elsewhere.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:14 -05:00
J. Bruce Fields 5a80a54d21 nfsd4: reorganize write decoding
In preparation for moving some of it elsewhere.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:14 -05:00
J. Bruce Fields 8a61b18c9b nfsd4: simplify reading of opnum
The comment here is totally bogus:
	- OP_WRITE + 1 is RELEASE_LOCKOWNER.  Maybe there was some older
	  version of the spec in which that served as a sort of
	  OP_ILLEGAL?  No idea, but it's clearly wrong now.
	- In any case, I can't see that the spec says anything about
	  what to do if the client sends us less ops than promised.
	  It's clearly nutty client behavior, and we should do
	  whatever's easiest: returning an xdr error (even though it
	  won't be consistent with the error on the last op returned)
	  seems fine to me.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:13 -05:00
J. Bruce Fields 447bfcc936 nfsd4: no, we're not going to check tags for utf8
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:08:12 -05:00
J. Bruce Fields 57d276d71a nfsd: fix v4 reply caching
Very embarassing: 1091006c5e "nfsd: turn
on reply cache for NFSv4" missed a line, effectively leaving the reply
cache off in the v4 case.  I thought I'd tested that, but I guess not.

This time, wrote a pynfs test to confirm it works.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-26 09:05:19 -05:00
Stanislav Kinsbursky 0912128149 nfsd: make laundromat network namespace aware
This patch moves laundromat_work to nfsd per-net context, thus allowing to run
multiple laundries.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:51 -05:00
Stanislav Kinsbursky 12760c6685 nfsd: pass nfsd_net instead of net to grace enders
Passing net context looks as overkill.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:50 -05:00
Stanislav Kinsbursky 3320fef19b nfsd: use service net instead of hard-coded init_net
This patch replaces init_net by SVC_NET(), where possible and also passes
proper context to nested functions where required.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:50 -05:00
Stanislav Kinsbursky 73758fed71 nfsd: make close_lru list per net
This list holds nfs4 clients (open) stateowner queue for last close replay,
which are network namespace aware. So let's make this list per network
namespace too.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:49 -05:00
Stanislav Kinsbursky 5ed58bb243 nfsd: make client_lru list per net
This list holds nfs4 clients queue for lease renewal, which are network
namespace aware. So let's make this list per network namespace too.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:48 -05:00
Stanislav Kinsbursky 1872de0e81 nfsd: make sessionid_hashtbl allocated per net
This hash holds established sessions state and closely associated with
nfs4_clients info, which are network namespace aware. So let's make it
allocated per network namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:47 -05:00
Stanislav Kinsbursky 20e9e2bc98 nfsd: make lockowner_ino_hashtbl allocated per net
This hash holds file lock owners and closely associated with nfs4_clients info,
which are network namespace aware. So let's make it allocated per network
namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:47 -05:00
Stanislav Kinsbursky 9b53113740 nfsd: make ownerstr_hashtbl allocated per net
This hash holds open owner state and closely associated with nfs4_clients
info, which are network namespace aware. So let's make it allocated per
network namespace too.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:46 -05:00
Stanislav Kinsbursky a99454aa4f nfsd: make unconf_name_tree per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:45 -05:00
Stanislav Kinsbursky 0a7ec37727 nfsd: make unconf_id_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:45 -05:00
Stanislav Kinsbursky 382a62e76c nfsd: make conf_name_tree per net
This tree holds nfs4_clients info, which are network namespace aware.
So let's make it per network namespace.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:44 -05:00
Stanislav Kinsbursky 8daae4dc0d nfsd: make conf_id_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:43 -05:00
Stanislav Kinsbursky 52e19c09a1 nfsd: make reclaim_str_hashtbl allocated per net
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash is used only by legacy tracker. So let's allocate hash in
tracker init.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:43 -05:00
Stanislav Kinsbursky c212cecfa2 nfsd: make nfs4_client network namespace dependent
And use it's net where possible.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-11-15 07:40:42 -05:00