dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

82524 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz 78829dd922 ide: remove needless includes from PCI host drivers
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:33 +01:00
Bartlomiej Zolnierkiewicz bfa14b42a3 ide: add ->cable_detect method to ide_hwif_t
* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:31 +01:00
Bartlomiej Zolnierkiewicz c413b9b94d ide: add struct ide_port_info instances to legacy host drivers
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:31 +01:00
Bartlomiej Zolnierkiewicz 1ebf74936b ide: separate PCI specific init from generic init in ide_pci_setup_ports()
* Setup ->mate and ->channel in ide_pci_setup_ports() instead of
  in ide_hwif_configure().

* Make 'port' parameter for ide_hwif_configure() 'unsigned int'.

* Separate PCI specific init from generic init in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:30 +01:00
Bartlomiej Zolnierkiewicz bf77c53171 ide: always set DMA masks in ide_pci_setup_ports()
Always set DMA masks in ide_pci_setup_ports() to make sure that the valid
masks for a host are set.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:30 +01:00
Bartlomiej Zolnierkiewicz d4e6d4eb16 macide: remove drive->capacity64 quirk
Nowadays IDE core always provides drive ID and ide-disk always setups
drive->capacity64 so this quirk is no longer needed.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:30 +01:00
Bartlomiej Zolnierkiewicz b4d1c73dcd atiixp/cs5535/scc_pata: fix "idex=ata66" parameter handling
Don't override the cable type if the "idex=ata66" parameter was used.

While at it:

* atiixp.c: factor out cable detection to atiixp_cable_detect() from
  init_hwif_atiixp().

* cs5535.c: pass 'ide_hwif_t *hwif' instead of 'struct pci_dev *dev' to
  cs5535_cable_detect().

* scc_pata.c: factor out cable detection to scc_cable_detect() from
  init_hwif_scc() and remove incorrect comment.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:29 +01:00
Bartlomiej Zolnierkiewicz bd38dd3c13 au1xxx-ide: fix ->io_32bit handling
The host driver must set hwif's ->no_io_32bit setting not drive's one
(ide_port_tune_devices() overrides drive's setting).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:29 +01:00
Bartlomiej Zolnierkiewicz 36e9dc469b dtc2278: fix ->io_32bit handling
On DTC2278 32-bit I/O has to be enabled for both devices on the port
so always enable it during init time and disallow further changes.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:28 +01:00
Linus Torvalds ae9458d6a0 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  apm_power: check I.intval for zero value, we use it as the divisor
  MAINTAINERS: remove kernel-discuss@handhelds.org list
  pda_power: implement polling
  pda_power: various cleanups
  apm_power: support using VOLTAGE_* properties for apm calculations
  pda_power: add suspend/resume support
  power_supply: add few more values and props
  pda_power: only register available psu
  power: fix incorrect unregistration in power_supply_create_attrs error path
  power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL
  [BATTERY] power_supply_leds: use kasprintf
  [BATTERY] Every file should include the headers containing the prototypes for its global functions.
2008-02-02 15:13:05 +11:00
Linus Torvalds 63e9b66e29 Merge branch 'for-linus' of git://linux-nfs.org/~bfields/linux
* 'for-linus' of git://linux-nfs.org/~bfields/linux: (100 commits)
  SUNRPC: RPC program information is stored in unsigned integers
  SUNRPC: Move exported symbol definitions after function declaration part 2
  NLM: tear down RPC clients in nlm_shutdown_hosts
  SUNRPC: spin svc_rqst initialization to its own function
  nfsd: more careful input validation in nfsctl write methods
  lockd: minor log message fix
  knfsd: don't bother mapping putrootfh enoent to eperm
  rdma: makefile
  rdma: ONCRPC RDMA protocol marshalling
  rdma: SVCRDMA sendto
  rdma: SVCRDMA recvfrom
  rdma: SVCRDMA Core Transport Services
  rdma: SVCRDMA Transport Module
  rdma: SVCRMDA Header File
  svc: Add svc_xprt_names service to replace svc_sock_names
  knfsd: Support adding transports by writing portlist file
  svc: Add svc API that queries for a transport instance
  svc: Add /proc/sys/sunrpc/transport files
  svc: Add transport hdr size for defer/revisit
  svc: Move the xprt independent code to the svc_xprt.c file
  ...
2008-02-02 14:31:28 +11:00
Linus Torvalds 687fcdf741 Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (38 commits)
  suspend: cleanup reference to swsusp_pg_dir[]
  PM: Remove obsolete /sys/devices/.../power/state docs
  Hibernation: Invoke suspend notifications after console switch
  Suspend: Invoke suspend notifications after console switch
  Suspend: Clean up suspend_64.c
  Suspend: Add config option to disable the freezer if architecture wants that
  ACPI: Print message before calling _PTS
  ACPI hibernation: Call _PTS before suspending devices
  Hibernation: Introduce begin() and end() callbacks
  ACPI suspend: Call _PTS before suspending devices
  ACPI: Separate disabling of GPEs from _PTS
  ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK
  Suspend: Introduce begin() and end() callbacks
  suspend: fix ia64 allmodconfig build
  ACPI: clear GPE earily in resume to avoid warning
  Suspend: Clean up Kconfig (V2)
  Hibernation: Clean up Kconfig (V2)
  Hibernation: Update messages
  Suspend: Use common prefix in messages
  Hibernation: Remove unnecessary variable declaration
  ...
2008-02-02 14:29:57 +11:00
Linus Torvalds 215e871aaa Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits)
  PCI: make pci_bus a struct device
  PCI: fix codingstyle issues in include/linux/pci.h
  PCI: fix codingstyle issues in drivers/pci/pci.h
  PCI: PCIE ASPM support
  PCI: Fix fakephp deadlock
  PCI: modify SB700 SATA MSI quirk
  PCI: Run ACPI _OSC method on root bridges only
  PCI ACPI: AER driver should only register PCIe devices with _OSC
  PCI ACPI: Added a function to register _OSC with only PCIe devices.
  PCI: constify function pointer tables
  PCI: Convert drivers/pci/proc.c to use unlocked_ioctl
  pciehp: block new requests from the device before power off
  pciehp: workaround against Bad DLLP during power off
  pciehp: wait for 1000ms before LED operation after power off
  PCI: Remove pci_enable_device_bars() from documentation
  PCI: Remove pci_enable_device_bars()
  PCI: Remove users of pci_enable_device_bars()
  PCI: Add pci_enable_device_{io,mem} intefaces
  PCI: avoid save the same type of cap multiple times
  PCI: correctly initialize a structure for pcie_save_pcix_state()
  ...
2008-02-02 14:29:33 +11:00
Linus Torvalds b6cf160c4b Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (128 commits)
  USB: fix codingstyle issues in drivers/usb/core/*.c
  USB: fix codingstyle issues in drivers/usb/core/message.c
  USB: fix codingstyle issues in drivers/usb/core/hcd-pci.c
  USB: fix codingstyle issues in drivers/usb/core/devio.c
  USB: fix codingstyle issues in drivers/usb/core/devices.c
  USB: fix codingstyle issues in drivers/usb/core/*.h
  USB: fix codingstyle issues in include/linux/usb/
  USB: fix codingstyle issues in include/linux/usb.h
  USB: mark USB drivers as being GPL only
  USB: use a real vendor and product id for root hubs
  USB: mount options: fix usbfs
  USB: Fix usb_serial_driver structure for Kobil cardreader driver.
  usb: ehci should use u16 for isochronous intervals
  usb: ehci, remove false clear-reset path
  USB: Use menuconfig objects
  usb: ohci-sm501 driver
  usb: dma bounce buffer support
  USB: last abuses of intfdata in close for usb-serial drivers
  USB: kl5kusb105 don't flush to logically disconnected devices
  USB: oti6858: cleanup
  ...
2008-02-02 14:28:57 +11:00
Peter Zijlstra ed50d6cbc3 debug: softlockup looping fix
Rafael J. Wysocki reported weird, multi-seconds delays during
suspend/resume and bisected it back to:

  commit 82a1fcb902
  Author: Ingo Molnar <mingo@elte.hu>
  Date:   Fri Jan 25 21:08:02 2008 +0100

      softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks

fix it:

 - restore the old wakeup mechanism
 - fix break usage in do_each_thread() { } while_each_thread().
 - fix the hotplug switch stmt, a fall-through case was broken.

Bisected-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02 14:27:45 +11:00
Anton Vorontsov e91926e9ea apm_power: check I.intval for zero value, we use it as the divisor
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:44:34 +03:00
Anton Vorontsov ae4bb15290 MAINTAINERS: remove kernel-discuss@handhelds.org list
kernel-discuss at handhelds.org is down for months, and nobody
knows why. So remove it for now.

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:44:34 +03:00
Anton Vorontsov c3caebad74 pda_power: implement polling
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:44:34 +03:00
Anton Vorontsov bfde2662ae pda_power: various cleanups
- handle spurious interrupts correctly;
- get rid of pda_power_supplies array, use two variables instead;
- factor out psy_changed() function, it will be used for polling.

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:44:34 +03:00
Dmitry Baryshkov dffd28a13a apm_power: support using VOLTAGE_* properties for apm calculations
It's pretty dummy, but useful for batteries for which we can only
get voltages.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:44:34 +03:00
Dmitry Baryshkov 8f8e9b387e pda_power: add suspend/resume support
Add suspend/resume/wakeup support for pda_power.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:43:00 +03:00
Dmitry Baryshkov c7cc930f9a power_supply: add few more values and props
Add LiMn (one of the most common for small non-rechargable batteries)
battery technology and voltage_min/_max properties support.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:43:00 +03:00
Dmitry Baryshkov 9ef4510626 pda_power: only register available psu
Currently pda-power adds both ac and usb power supply units.
This patch fixes it so that psu are added only if they are enabled.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:42:59 +03:00
Andres Salomon 839dc9f105 power: fix incorrect unregistration in power_supply_create_attrs error path
In power_supply_create_attrs(), we create static attributes as referenced
by power_supply_static_attrs[i].  After that, if we fail, we unregister
via power_supply_static_attrs[psy->properties[i]].  This is incorrect, as
psy->properties has absolutely no bearing on static attribs.  This patch
fixes it to unregister the correct attrib.

Another line which was unnecessarily line wrapped is also unwrapped.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02 02:42:59 +03:00
Andres Salomon 8efe444038 power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL
The CAPACITY_LEVEL stuff defines various levels of charge; however, what
is the difference between them?  What differentiates between HIGH and NORMAL,
LOW and CRITICAL, etc?

As it appears that these are fairly arbitrary, we end up making such policy
decisions in the kernel (or in hardware).  This is the sort of decision that
should be made in userspace, not in the kernel.

If the hardware does not support _CAPACITY and it cannot be easily calculated,
then perhaps the driver should register a custom CAPACITY_LEVEL attribute;
however, userspace should not become accustomed to looking for such a thing,
and we should certainly not encourage drivers to provide CAPACITY_LEVEL
stubs.

The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL.  The
OLPC battery driver is the only driver making use of this, so it's
removed from there as well.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02 02:42:59 +03:00
Akinobu Mita 4d24473c43 [BATTERY] power_supply_leds: use kasprintf
Use kasprintf instead of kmalloc()-strcpy()-strcat().

Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:42:59 +03:00
Adrian Bunk 25f12141e2 [BATTERY] Every file should include the headers containing the prototypes for its global functions.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02 02:42:58 +03:00
Rafael J. Wysocki a6eb84bc1e suspend: cleanup reference to swsusp_pg_dir[]
swsusp_pg_dir[] is used for suspend, but not for hibernation.
clean-up the ifdefs which worked by accident, while implying the opposite.
Delete the __nosavedata, which also implied the opposite.

Some day we may optimize CONFIG_ACPI_SLEEP to build minimal kernels
for just hibernate or just suspend but not both,
but today isn't that day.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:59 -05:00
David Brownell ffffa4b502 PM: Remove obsolete /sys/devices/.../power/state docs
The /sys/devices/.../power/state files have been gone for a while
now, but I just noticed some documentation that still refers to
them.  (Fortunately described as DEPRECATED and WILL REMOVE).

Time to remove that obsolete documentation too ...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:59 -05:00
Rafael J. Wysocki 5a0a2f3046 Hibernation: Invoke suspend notifications after console switch
Following the recent change in the suspend code path, switch consoles before
calling PM notifiers during hibernation.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:59 -05:00
Johannes Berg af258f516b Suspend: Invoke suspend notifications after console switch
In order to fix APM emulation it is necessary to enable apm-emulation
notifications for suspends triggered in various ways via the suspend
notifiers.  However, this will cause the systems using APM emulation
to lock up between X being needed to switch away from the VT and X
already waiting for resume in the APM ioctl.

This patch moves the console switch (if enabled) before the suspend
notification (and after the resume notification) to avoid this issue.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Borislav Petkov 17b7a89cfb Suspend: Clean up suspend_64.c
There's a freakishly long comment in suspend_64.c, shorten it.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Johannes Berg b28f508112 Suspend: Add config option to disable the freezer if architecture wants that
This patch makes the freezer optional for suspend to allow the
system to work (or not work) like the original PMU suspend.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Rafael J. Wysocki c9b6c8f68e ACPI: Print message before calling _PTS
Make acpi_sleep_prepare() static and cause it to print a message
specifying the ACPI system sleep state to be entered (helpful for
debugging the suspend/hibernation code).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Rafael J. Wysocki 7258ec5d11 ACPI hibernation: Call _PTS before suspending devices
The ACPI 1.0 specification wants us to put devices into low power
states after executing the _PTS global control method, while ACPI
2.0 and later want us to do that in the reverse order.  The current
hibernation code follows ACPI 2.0 in that respect which may cause some
ACPI 1.0x systems to hang during hibernation (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

Make the hibernation code execute _PTS before putting devices into
low power states (ie. in accordance with ACPI 1.0x) with the
possibility to override that using the 'acpi_new_pts_ordering' kernel
command line option.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Rafael J. Wysocki caea99ef33 Hibernation: Introduce begin() and end() callbacks
Introduce global hibernation callback .end() and rename global
hibernation callback .start() to .begin(), in analogy with the
recent modifications of the global suspend callbacks.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Rafael J. Wysocki 60417f5976 ACPI suspend: Call _PTS before suspending devices
The ACPI 1.0 specification wants us to put devices into low power
states after executing the _PTS global control method, while ACPI
2.0 and later want us to do that in the reverse order.  The current
suspend code follows ACPI 2.0 in that respect which causes some
ACPI 1.0x systems to hang during suspend (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

Make the suspend code execute _PTS before putting devices into low
power states (ie. in accordance with ACPI 1.0x) and provide a command
line option to override the default if need be.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Rafael J. Wysocki 3c1d2b6085 ACPI: Separate disabling of GPEs from _PTS
The preparation to enter an ACPI system sleep state is now tied to
the disabling of GPEs, but the GPEs should not be disabled before
suspending devices.  Since on ACPI 1.0x systems the _PTS global
control method should be executed before suspending devices, we
need to disable GPEs separately.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
Rafael J. Wysocki c95d47a868 ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK
The execution of ACPI global control methods _GTS and _BFS is
currently tied to the preparation to enter a sleep state and to the
leaving of the sleep state, respectively.  However, these functions
are called before disabling the nonboot CPUs and after enabling
them, respectively (in fact, on ACPI 1.0x systems the first of them
ought to be called before suspending devices), while according to the
ACPI specification, _GTS is to be executed right prior to entering
the system sleep state and _BFS is to be executed right after the
platfor firmware has returned control to the OS on wake up.

Move the execution of _GTS and _BFS to the right places.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
Rafael J. Wysocki c697eecebc Suspend: Introduce begin() and end() callbacks
On ACPI systems the target state set by acpi_pm_set_target() is
reset by acpi_pm_finish(), but that need not be called if the
suspend fails.  All platforms that use the .set_target() global
suspend callback are affected by analogous issues.

For this reason, we need an additional global suspend callback that
will reset the target state regardless of whether or not the suspend
is successful.  Also, it is reasonable to rename the .set_target()
callback, since it will be used for a different purpose on ACPI
systems (due to ACPI 1.0x code ordering requirements).

Introduce the global suspend callback .end() to be executed at the
end of the suspend sequence and rename the .set_target() global
suspend callback to .begin().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
Rafael J. Wysocki 7671b8ae53 suspend: fix ia64 allmodconfig build
kernel/power/main.c:488: error: ‘pm_test_attr’ undeclared here (not in a function)

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
Shaohua Li a3627f67b1 ACPI: clear GPE earily in resume to avoid warning
Wakeup GPE hasn't a handler. If system is waked up by such GPE like a
USB hotplug, I saw a lot of error reporting the GPE hasn't handler.
acpi_leave_sleep_state will clear the GPE but it's too late, we should
do it before interrupt is re-enabled.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Johannes Berg f4cb570076 Suspend: Clean up Kconfig (V2)
This cleans up the suspend Kconfig and removes the need to
declare centrally which architectures support suspend. All
architectures that currently support suspend are modified
accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Johannes Berg 801e4062fd Hibernation: Clean up Kconfig (V2)
This cleans up the hibernation Kconfig and removes the need to
declare centrally which architectures support hibernation. All
architectures that currently support hibernation are modified
accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki 23976728a4 Hibernation: Update messages
Make hibernation messages start with one common prefix "PM: " and use
the word "hibernation" in the messages as a synonym of "suspend to
disk".

Turn some KERN_INFO messages into debug ones.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki 465d2b477f Suspend: Use common prefix in messages
Make suspend messages start with one common prefix "PM: ".

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki b6887a2944 Hibernation: Remove unnecessary variable declaration
Remove the unnecessary extern declaration of resume_file[]
from kernel/power/swap.c .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki 9575809c6f Hibernation: Fix comment in disk.c
Fix a comment in kernel/power/disk.c so that it doesn't contain lines
longer that 80 characters.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki 9628c0ee6a Suspend: Fix comment in main.c
Fix a comment in kernel/power/main.c so that it doesn't contain lines
longer that 80 characters.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:55 -05:00
Rafael J. Wysocki 72df68ca8e Hibernation: Move low level resume to disk.c
Move the low level restore code to kernel/power/disk.c , since the
corresponding low level hibernation code is already there.

Make restore fail if device_power_down(PMSG_PRETHAW) returns an
error.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:54 -05:00