dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

245019 Commits

Author SHA1 Message Date
Joerg Roedel 3b88e41a41 KVM: SVM: Add intercept check for accessing dr registers
This patch adds the intercept checks for instruction
accessing the debug registers.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:01 -04:00
Joerg Roedel cfec82cb7d KVM: SVM: Add intercept check for emulated cr accesses
This patch adds all necessary intercept checks for
instructions that access the crX registers.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:01 -04:00
Joerg Roedel 8a76d7f25f KVM: x86: Add x86 callback for intercept check
This patch adds a callback into kvm_x86_ops so that svm and
vmx code can do intercept checks on emulated instructions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:01 -04:00
Joerg Roedel 8ea7d6aef8 KVM: x86 emulator: Add flag to check for protected mode instructions
This patch adds a flag for the opcoded to tag instruction
which are only recognized in protected mode. The necessary
check is added too.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:01 -04:00
Joerg Roedel d09beabd7c KVM: x86 emulator: Add check_perm callback
This patch adds a check_perm callback for each opcode into
the instruction emulator. This will be used to do all
necessary permission checks on instructions before checking
whether they are intercepted or not.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:01 -04:00
Joerg Roedel 775fde8648 KVM: x86 emulator: Don't write-back cpu-state on X86EMUL_INTERCEPTED
This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:00 -04:00
Avi Kivity 3c6e276f22 KVM: x86 emulator: add SVM intercepts
Add intercept codes for instructions defined by SVM as
interceptable.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:00 -04:00
Avi Kivity c4f035c60d KVM: x86 emulator: add framework for instruction intercepts
When running in guest mode, certain instructions can be intercepted by
hardware.  This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.

This patch adds a framework for intercepting instructions.  If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not.  The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception.  This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.

In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:00 -04:00
Avi Kivity aa97bb4891 KVM: x86 emulator: implement movdqu instruction (f3 0f 6f, f3 0f 7f)
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:59 -04:00
Avi Kivity 1253791df9 KVM: x86 emulator: SSE support
Add support for marking an instruction as SSE, switching registers used
to the SSE register file.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:59 -04:00
Avi Kivity 0d7cdee83a KVM: x86 emulator: Specialize decoding for insns with 66/f2/f3 prefixes
Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between
different variants of the same instruction.  Usually the encoding is quite
regular, but in some cases (including non-SIMD instructions) the prefixes
generate very different instructions.  Examples include XCHG/PAUSE,
MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32.

Allow the emulator to handle these special cases by splitting such opcodes
into groups, with different decode flags and execution functions for different
prefixes.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:59 -04:00
Avi Kivity 5037f6f324 KVM: x86 emulator: define callbacks for using the guest fpu within the emulator
Needed for emulating fpu instructions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Avi Kivity 1d6b114f20 KVM: x86 emulator: do not munge rep prefix
Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE.  Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Avi Kivity cef4dea07f KVM: 16-byte mmio support
Since sse instructions can issue 16-byte mmios, we need to support them.  We
can't increase the kvm_run mmio buffer size to 16 bytes without breaking
compatibility, so instead we break the large mmios into two smaller 8-byte
ones.  Since the bus is 64-bit we aren't breaking any atomicity guarantees.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Avi Kivity 5287f194bf KVM: Split mmio completion into a function
Make room for sse mmio completions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Avi Kivity 70252a1053 KVM: extend in-kernel mmio to handle >8 byte transactions
Needed for coalesced mmio using sse.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Gleb Natapov 1499e54af0 KVM: x86: better fix for race between nmi injection and enabling nmi window
Fix race between nmi injection and enabling nmi window in a simpler way.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11 07:56:57 -04:00
Marcelo Tosatti c761e5868e Revert "KVM: Fix race between nmi injection and enabling nmi window"
This reverts commit f86368493e.

Simpler fix to follow.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11 07:56:57 -04:00
Glauber Costa 3291892450 KVM: expose async pf through our standard mechanism
As Avi recently mentioned, the new standard mechanism for exposing features
is KVM_GET_SUPPORTED_CPUID, not spamming CAPs. For some reason async pf
missed that.

So expose async_pf here.

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Gleb Natapov <gleb@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:57 -04:00
Avi Kivity 654f06fc65 KVM: VMX: simplify NMI mask management
Use vmx_set_nmi_mask() instead of open-coding management of
the hardware bit and the software hint (nmi_known_unmasked).

There's a slight change of behaviour when running without
hardware virtual NMI support - we now clear the NMI mask if
NMI delivery faulted in that case as well.  This improves
emulation accuracy.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:57 -04:00
Jan Kiszka 89a9fb78b5 KVM: SVM: Remove unused svm_features
We use boot_cpu_has now.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:57 -04:00
Avi Kivity 8878647585 KVM: VMX: Use cached VM_EXIT_INTR_INFO in handle_exception
vmx_complete_atomic_exit() cached it for us, so we can use it here.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:56 -04:00
Avi Kivity c5ca8e572c KVM: VMX: Don't VMREAD VM_EXIT_INTR_INFO unconditionally
Only read it if we're going to use it later.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:56 -04:00
Avi Kivity 00eba012d5 KVM: VMX: Refactor vmx_complete_atomic_exit()
Move the exit reason checks to the front of the function, for early
exit in the common case.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:56 -04:00
Avi Kivity f9902069c4 KVM: VMX: Qualify check for host NMI
Check for the exit reason first; this allows us, later,
to avoid a VMREAD for VM_EXIT_INTR_INFO_FIELD.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:56 -04:00
Avi Kivity 9d58b93192 KVM: VMX: Avoid vmx_recover_nmi_blocking() when unneeded
When we haven't injected an interrupt, we don't need to recover
the nmi blocking state (since the guest can't set it by itself).
This allows us to avoid a VMREAD later on.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:56 -04:00
Avi Kivity 69c7302890 KVM: VMX: Cache cpl
We may read the cpl quite often in the same vmexit (instruction privilege
check, memory access checks for instruction and operands), so we gain
a bit if we cache the value.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:54 -04:00
Avi Kivity f4c63e5d5a KVM: VMX: Optimize vmx_get_cpl()
In long mode, vm86 mode is disallowed, so we need not check for
it.  Reading rflags.vm may require a VMREAD, so it is expensive.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:54 -04:00
Avi Kivity 6de12732c4 KVM: VMX: Optimize vmx_get_rflags()
If called several times within the same exit, return cached results.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:54 -04:00
Avi Kivity f6e7847589 KVM: Use kvm_get_rflags() and kvm_set_rflags() instead of the raw versions
Some rflags bits are owned by the host, not guest, so we need to use
kvm_get_rflags() to strip those bits away or kvm_set_rflags() to add them
back.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:54 -04:00
Xiao Guangrong 0ee8dcb87e KVM: cleanup memslot_id function
We can get memslot id from memslot->id directly

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:53 -04:00
Linus Torvalds 9f381a61f5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  slcan: fix ldisc->open retval
  net/usb: mark LG VL600 LTE modem ethernet interface as WWAN
  xfrm: Don't allow esn with disabled anti replay detection
  xfrm: Assign the inner mode output function to the dst entry
  net: dev_close() should check IFF_UP
  vlan: fix GVRP at dismantle time
  netfilter: revert a2361c8735
  netfilter: IPv6: fix DSCP mangle code
  netfilter: IPv6: initialize TOS field in REJECT target module
  IPVS: init and cleanup restructuring
  IPVS: Change of socket usage to enable name space exit.
  netfilter: ebtables: only call xt_compat_add_offset once per rule
  netfilter: fix ebtables compat support
  netfilter: ctnetlink: fix timestamp support for new conntracks
  pch_gbe: support ML7223 IOH
  PCH_GbE : Fixed the issue of checksum judgment
  PCH_GbE : Fixed the issue of collision detection
  NET: slip, fix ldisc->open retval
  be2net: Fixed bugs related to PVID.
  ehea: fix wrongly reported speed and port
  ...
2011-05-10 17:39:01 -07:00
David Rientjes 21a43e397e slub: Revert "[PARISC] slub: fix panic with DISCONTIGMEM"
This reverts commit 4a5fa3590f, which did not allow SLUB to be used
on architectures that use DISCONTIGMEM without compiling NUMA support
without CONFIG_BROKEN also set.

The slub panic that it was intended to prevent is addressed by
d9b41e0b54 ("[PARISC] set memory ranges in N_NORMAL_MEMORY when
onlined") on parisc so there is no further slub issues with such a
configuration.

The reverts allows SLUB now to be used on such architectures since
there haven't been any reports of additional errors.

Cc: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-10 17:37:34 -07:00
David S. Miller 9bbc052d5e Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6 2011-05-10 15:04:35 -07:00
Oliver Hartkopp 0d4420a90b slcan: fix ldisc->open retval
TTY layer expects 0 if the ldisc->open operation succeeded.

Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:04:07 -07:00
Dan Williams aae1e743fe net/usb: mark LG VL600 LTE modem ethernet interface as WWAN
Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:03:50 -07:00
Steffen Klassert 6fa5ddcc67 xfrm: Don't allow esn with disabled anti replay detection
Unlike the standard case, disabled anti replay detection needs some
nontrivial extra treatment on ESN. RFC 4303 states:

Note: If a receiver chooses to not enable anti-replay for an SA, then
the receiver SHOULD NOT negotiate ESN in an SA management protocol.
Use of ESN creates a need for the receiver to manage the anti-replay
window (in order to determine the correct value for the high-order
bits of the ESN, which are employed in the ICV computation), which is
generally contrary to the notion of disabling anti-replay for an SA.

So return an error if an ESN state with disabled anti replay detection
is inserted for now and add the extra treatment later if we need it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:03:34 -07:00
Steffen Klassert 43a4dea4c9 xfrm: Assign the inner mode output function to the dst entry
As it is, we assign the outer modes output function to the dst entry
when we create the xfrm bundle. This leads to two problems on interfamily
scenarios. We might insert ipv4 packets into ip6_fragment when called
from xfrm6_output. The system crashes if we try to fragment an ipv4
packet with ip6_fragment. This issue was introduced with git commit
ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets
as needed). The second issue is, that we might insert ipv4 packets in
netfilter6 and vice versa on interfamily scenarios.

With this patch we assign the inner mode output function to the dst entry
when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner
mode is used and the right fragmentation and netfilter functions are called.
We switch then to outer mode with the output_finish functions.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:03:34 -07:00
Eric Dumazet e14a599335 net: dev_close() should check IFF_UP
Commit 443457242b (factorize sync-rcu call in
unregister_netdevice_many) mistakenly removed one test from dev_close()

Following actions trigger a BUG :

modprobe bonding
modprobe dummy
ifconfig bond0 up
ifenslave bond0 dummy0
rmmod dummy

dev_close() must not close a non IFF_UP device.

With help from Frank Blaschka and Einar EL Lueck

Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: Einar EL Lueck <ELELUECK@de.ibm.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:03:33 -07:00
Eric Dumazet 55aee10dec vlan: fix GVRP at dismantle time
ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on
ip link set eth2.103 up
rmmod tg3    # driver providing eth2

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
 PGD 11d251067 PUD 11b9e0067 PMD 0
 Oops: 0000 [#1] SMP
 last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex
 CPU 0
 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables]

 Pid: 11494, comm: rmmod Tainted: G        W   2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6
 RIP: 0010:[<ffffffffa0030c9e>]  [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
 RSP: 0018:ffff88007a19bae8  EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002
 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b
 RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00
 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002
 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001
 FS:  0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0
 CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0)
 Stack:
  ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48
  ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6
  ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7
 Call Trace:
  [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q]
  [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q]
  [<ffffffff8137e427>] __dev_close_many+0x87/0xe0
  [<ffffffff8137e507>] dev_close_many+0x87/0x110
  [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240
  [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60
  [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q]
  [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0
  [<ffffffff81479d03>] notifier_call_chain+0x53/0x80
  [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10
  [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20
  [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60
  [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240
  [<ffffffff8137e85f>] rollback_registered+0x2f/0x40
  [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90
  [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30
  [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3]

We should call vlan_gvrp_request_leave() from unregister_vlan_dev(),
not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant()
is called right after unregister_netdevice_queue(). In batch mode,
unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop().

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 15:03:32 -07:00
Linus Torvalds 54b333529d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (28 commits)
  MIPS: Alchemy: fix xxs1500 build error
  MIPS: Invalidate old TLB mappings when updating huge page PTEs.
  MIPS: Hibernation: Fixes for PAGE_SIZE >= 64kb
  MIPS: JZ4740: Set one-shot feature flag for the clockevent
  MIPS: JZ4740: Export symbols to the watchdog driver module
  MIPS: JZ4740: Fix GCC 4.6.0 build error.
  MIPS: Audit: Fix success success argument pass to audit_syscall_exit
  MIPS: Fix calc_vmlinuz_load_addr build warnings.
  MIPS: Alchemy: Fix GCC 4.6.0 build error.
  MIPS: Document former use of timerfd(2) syscall number.
  MIPS: IP27: Fix GCC 4.6.0 build error.
  MIPS: IP27: Fix GCC 4.6.0 build error.
  MIPS: bcm63xx: Fix header_crc comment in bcm963xx_tag.h
  MIPS: Octeon: Guard the Kconfig body with CPU_CAVIUM_OCTEON
  MIPS: Octeon: Cleanup Kconfig IRQ_CPU* symbols.
  MIPS: Rename .data..mostly and properly handle it in linker script
  MIPS: MSP: Fix build error
  MIPS: MSP71xx: Fix typo in msp_per_irq_controller
  MIPS: Loongson: Fix GCC 2.6.0 build error.
  MIPS: Jazz: Fix GCC 4.6.0 build error
  ...
2011-05-10 12:00:53 -07:00
Linus Torvalds 675badfc48 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix race condition in AIL push trigger
  xfs: make AIL target updates and compares 32bit safe.
  xfs: always push the AIL to the target
  xfs: exit AIL push work correctly when AIL is empty
  xfs: ensure reclaim cursor is reset correctly at end of AG
2011-05-10 11:56:35 -07:00
Manuel Lauss 780914c3cf MIPS: Alchemy: fix xxs1500 build error
This fixes:
alchemy/xxs1500/init.c: In function 'prom_init':
alchemy/xxs1500/init.c:57:17: error: ignoring return value of 'kstrtoul', declared with attribute warn_unused_result

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2340/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
David Daney 310f130339 MIPS: Invalidate old TLB mappings when updating huge page PTEs.
Without this, stale Icache or TLB entries may be used.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
https://patchwork.linux-mips.org/patch/2318/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Wu Zhangjin f850548ef8 MIPS: Hibernation: Fixes for PAGE_SIZE >= 64kb
PAGE_SIZE >= 64kb (1 << 16) is too big to be the immediate of the
addiu/daddiu instruction, so, use addu/daddu instruction instead.

The following compiling error is fixed:

AS      arch/mips/power/hibernate.o
arch/mips/power/hibernate.S: Assembler messages:
arch/mips/power/hibernate.S:38: Error: expression out of range
make[2]: *** [arch/mips/power/hibernate.o] Error 1
make[1]: *** [arch/mips/power] Error 2

Reported-by: Roman Mamedov <rm@romanrm.ru>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2313/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Lars-Peter Clausen 1e2bbde4af MIPS: JZ4740: Set one-shot feature flag for the clockevent
The code for supporting one-shot mode for the clockevent is already there,
only the feature flag was not set.  Setting the one-shot flag allows the
kernel to run in tickless mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Ralf Baechle aa7ce1c303 MIPS: JZ4740: Export symbols to the watchdog driver module
MODPOST 356 modules
ERROR: "jz4740_timer_disable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefine
d!
ERROR: "jz4740_timer_enable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefined
!
make[1]: *** [__modpost] Error 1

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Ralf Baechle f1b6a5054c MIPS: JZ4740: Fix GCC 4.6.0 build error.
CC      arch/mips/jz4740/dma.o
arch/mips/jz4740/dma.c: In function 'jz4740_dma_chan_irq':
arch/mips/jz4740/dma.c:245:11: error: variable 'status' set but not used [-Werro
r=unused-but-set-variable]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Ralf Baechle b20bff02b2 MIPS: Audit: Fix success success argument pass to audit_syscall_exit
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:25 +01:00
Ralf Baechle 893d20fbae MIPS: Fix calc_vmlinuz_load_addr build warnings.
HOSTCC  arch/mips/boot/compressed/calc_vmlinuz_load_addr
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c: In function 'main':
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:35:2: warning: format '%llx' expects type 'long long unsigned int *', but argument 3 has type 'uint64_t *'
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:54:2: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t'

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:25 +01:00