Archived
14
0
Fork 0
Commit graph

233 commits

Author SHA1 Message Date
David S. Miller
49997d7515 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c
2008-07-18 02:39:39 -07:00
Steve Wise
4ab928f692 RDMA/cxgb3: Fixes for zero STag
Handling the zero STag in receive work request requires some extra
logic in the driver:

 - Only set the QP_PRIV bit for kernel mode QPs.

- Add a zero STag build function for recv wrs. The uP needs a PBL
  allocated and passed down in the recv WR so it can construct a HW
  PBL for the zero STag S/G entries.  Note: we need to place a few
  restrictions on zero STag usage because of this:

  1) all SGEs in a recv WR must either be zero STag or not.  No mixing.

  2) an individual SGE length cannot exceed 128MB for a zero-stag SGE.
     This should be OK since it's not really practical to allocate
     such a large chunk of pinned contiguous DMA mapped memory.

- Add an optimized non-zero-STag recv wr format for kernel users.
  This is needed to optimize both zero and non-zero STag cracking in
  the recv path for kernel users.

 - Remove the iwch_ prefix from the static build functions.

 - Bump required FW version.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
2008-07-14 23:48:53 -07:00
Steve Wise
14cc180f7b RDMA/cxgb3: Add support for protocol statistics
- Add a new rdma ctl command called RDMA_GET_MIB to the cxgb3 low
  level driver to obtain the protocol mib from the rnic hardware.

- Add new iw_cxgb3 provider method to get the MIB from the low level
  driver.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:48 -07:00
Karen Xie
9439f74944 cxgb3 - Add iscsi support
Add iSCSI (S3xx) support.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:20:33 -04:00
David Woodhouse
2c733a1678 cxgb3: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:26 +01:00
22d1ba74bb vlan: move struct vlan_dev_info to private header
Hide struct vlan_dev_info from drivers to prevent them from growing
more creative ways to use it. Provide accessors for the two drivers
that currently use it.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08 03:23:57 -07:00
Divy Le Ray
8f85cd7fef cxgb3 - add missing adapter type for RDMA
T3C added support is now reflected to the RDMA driver.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:59:33 -04:00
Divy Le Ray
b47385bd4f cxgb3 - Add LRO support
Add LRO support.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:13 -04:00
Divy Le Ray
7385ecf339 cxgb3 - Add page support to jumbo frame Rx queue
Add page support to Jumbo frame Rx queues.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:11 -04:00
Divy Le Ray
b1fb1f280d cxgb3 - Fix dma mapping error path
Take potential dma mapping errors in account.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:10 -04:00
Divy Le Ray
204e2f98c2 cxgb3 - fix EEH
Reset the chip when the PCI link goes down.
Preserve the napi structure when a sge qset's resources are freed.
Replay only HW initialization when the chip comes out of reset.

Signed-off-by: Divy Le ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:37 -04:00
Divy Le Ray
48c4b6dbb7 cxgb3 - fix port up/down error path
Fix faiures path when ports are stopped and restarted
in EEH recovery.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:37 -04:00
Alan Cox
1b3aa7afb6 cxgb3: Use CAP_SYS_RAWIO for firmware
Otherwise theoretically at least

	CAP_NET_ADMIN
	Reload new firmware
	Wait..
	Firmware patches kernel

So it should be CAY_SYS_RAWIO - not that I suspect this is in fact a
credible attack vector!

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 12:27:53 -04:00
Steve Wise
f8b0dfd152 RDMA/cxgb3: Support peer-2-peer connection setup
Open MPI, Intel MPI and other applications don't respect the iWARP
requirement that the client (active) side of the connection send the
first RDMA message.  This class of application connection setup is
called peer-to-peer.  Typically once the connection is setup, _both_
sides want to send data.

This patch enables supporting peer-to-peer over the chelsio RNIC by
enforcing this iWARP requirement in the driver itself as part of RDMA
connection setup.

Connection setup is extended, when the peer2peer module option is 1,
such that the MPA initiator will send a 0B Read (the RTR) just after
connection setup.  The MPA responder will suspend SQ processing until
the RTR message is received and reply-to.

In the longer term, this will be handled in a standardized way by
enhancing the MPA negotiation so peers can indicate whether they
want/need the RTR and what type of RTR (0B read, 0B write, or 0B send)
should be sent.  This will be done by standardizing a few bits of the
private data in order to negotiate all this.  However this patch
enables peer-to-peer applications now and allows most of the required
firmware and driver changes to be done and tested now.

Design:

 - Add a module option, peer2peer, to enable this mode.

 - New firmware support for peer-to-peer mode:

	- a new bit in the rdma_init WR to tell it to do peer-2-peer
	  and what form of RTR message to send or expect.

	- process _all_ preposted recvs before moving the connection
	  into rdma mode.

	- passive side: defer completing the rdma_init WR until all
	  pre-posted recvs are processed.  Suspend SQ processing until
	  the RTR is received.

	- active side: expect and process the 0B read WR on offload TX
	  queue. Defer completing the rdma_init WR until all
	  pre-posted recvs are processed.  Suspend SQ processing until
	  the 0B read WR is processed from the offload TX queue.

 - If peer2peer is set, driver posts 0B read request on offload TX
   queue just after posting the rdma_init WR to the offload TX queue.

 - Add CQ poll logic to ignore unsolicitied read responses.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Matthew Wilcox
5f090dcb4d net: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:15:50 -04:00
Dan Noe
d96a51f6b8 cxgb3: Fix __must_check warning with dev_dbg.
Fix the warning:
drivers/net/cxgb3/cxgb3_main.c: In function ‘offload_open’:
drivers/net/cxgb3/cxgb3_main.c:936: warning: ignoring return value of
 ‘sysfs_create_group’, declared with attribute warn_unused_result

Now the return value is checked; if sysfs_create_group() returns failure,
a warning is printed using dev_dbg, and the code continues as before.  Use
of dev_dbg ensures printk is not needlessly included unless desired for
debugging.

Signed-off-by: Dan Noe <dpn@isomerica.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17 15:31:32 -04:00
David S. Miller
8e8e43843b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/usb/rndis_host.c
	drivers/net/wireless/b43/dma.c
	net/ipv6/ndisc.c
2008-03-27 18:48:56 -07:00
Al Viro
fa3a6cb4a6 annotate cxgb3 (ab)uses of skb->priority/skb->csum
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26 00:18:46 -04:00
Roland Dreier
b1186dee3e cxgb3: Fix lockdep problems with sge.reg_lock
Using iWARP with a Chelsio T3 NIC generates the following lockdep warning:

    =================================
    [ INFO: inconsistent lock state ]
    2.6.25-rc6 #50
    ---------------------------------
    inconsistent {softirq-on-W} -> {in-softirq-W} usage.
    swapper/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
     (&adap->sge.reg_lock){-+..}, at: [<ffffffff880e5ee2>] cxgb_offload_ctl+0x3af/0x507 [cxgb3]

The problem is that reg_lock is used with plain spin_lock() in
drivers/net/cxgb3/sge.c but is used with spin_lock_irqsave() in
drivers/net/cxgb3/cxgb3_offload.c.  This is technically a false
positive, since the uses in sge.c are only in the initialization and
cleanup paths and cannot overlap with any use in interrupt context.

The best fix is probably just to use spin_lock_irq() with reg_lock in
sge.c.  Even though it's not strictly required for correctness, it
avoids triggering lockdep and the extra overhead of disabling
interrupts is not important at all in the initialization and cleanup
slow paths.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:42:05 -04:00
David S. Miller
577f99c1d0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/rt2x00/rt2x00dev.c
	net/8021q/vlan_dev.c
2008-03-18 00:37:55 -07:00
Divy Le Ray
cd7e903440 cxgb3: Fix transmit queue stop mechanism
The last change in the Tx queue stop mechanism opens a window
where the Tx queue might be stopped after pending credits
returned.

Tx credits are returned via a control message generated by the HW.
It returns tx credits on demand, triggered by a completion bit
set in selective transmit packet headers.

The current code can lead to the Tx queue stopped
with all pending credits returned, and the current frame
not triggering a credit return. The Tx queue will then never be
awaken.

The driver could alternatively request a completion for packets
that stop the queue. It's however safer at this point to go back
to the pre-existing behaviour.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17 08:07:01 -04:00
YOSHIFUJI Hideaki
8082c37cdc [NET] NEIGHBOUR: Remove unpopular neigh_is_connected().
neigh_is_connected() is not popular at all, and the only user
drivers/net/cxgb3/l2t.c:t3_l2t_update() also have raw (expanded) expression.
Let's expand it and remove the inline function.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04 15:18:23 +09:00
Steve Wise
4eb61e0231 cxgb3: Handle ARP completions that mark neighbors stale.
When ARP completes due to a request rather than a reply the neighbor is
marked NUD_STALE instead of reachable (see arp_process()).  The handler
for the resulting netevent needs to check also for NUD_STALE.

Failure to use the arp entry can cause RDMA connection failures.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:09:17 -05:00
Krishna Kumar
a8cc21f646 Optimize cxgb3 xmit path (a bit)
1. Add common code for stopping queue.
	2. No need to call netif_stop_queue followed by netif_wake_queue (and
	   infact a netif_start_queue could have been used instead), instead
	   call stop_queue if required, and remove code under USE_GTS macro.
	3. There is no need to check for netif_queue_stopped, as the network
	   core guarantees that for us (I am sure every driver could remove
	   that check, eg e1000 - I have tested that path a few billion times
	   with about a few hundred thousand qstops but the condition never
	   hit even once).

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 10:44:28 -05:00
Christoph Lameter
9e2779fa28 is_vmalloc_addr(): Check if an address is within the vmalloc boundaries
Checking if an address is a vmalloc address is done in a couple of places.
Define a common version in mm.h and replace the other checks.

Again the include structures suck.  The definition of VMALLOC_START and
VMALLOC_END is not available in vmalloc.h since highmem.c cannot be included
there.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:14 -08:00
Roland Dreier
7b9b09436b cxgb3: Remove incorrect __devinit annotations
When PCI error recovery was added to cxgb3, a function t3_io_slot_reset()
was added.  This function can call back into t3_prep_adapter() at any
time, so t3_prep_adapter() can no longer be marked __devinit.
This patch removes the __devinit annotation from t3_prep_adapter() and
all the functions that it calls, which fixes

    WARNING: drivers/net/cxgb3/built-in.o(.text+0x2427): Section mismatch in reference from the function t3_io_slot_reset() to the function .devinit.text:t3_prep_adapter()

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:35 -08:00
Al Viro
05e5c11653 annotate cxgb3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:30 -08:00
9dfebcc647 [VLAN]: Turn VLAN_DEV_INFO into inline function
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:32 -08:00
Divy Le Ray
bc4b6b5269 cxgb3 - Fix EEH, missing softirq blocking
set_pci_drvdata() stores a pointer to the adapter,
not the net device.
Add missing softirq blocking in t3_mgmt_tx.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:22 -08:00
Divy Le Ray
b881955b7d cxgb3 - parity initialization for T3C adapters.
Add parity initialization for T3C adapters.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:22 -08:00
Jeff Garzik
2eab17ab88 drivers/net/cxgb3: trim trailing whitespace
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28 15:04:13 -08:00
Divy Le Ray
afefce66a5 cxgb3 - Fix I/O synchronization
Synchronize memory access before ringing
the Tx door bell.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:12 -08:00
Divy Le Ray
a2604be548 cxgb3 - HW set up updates
Disable PEX errors. The HW generates false positives.
Update RSS hash function to a symmetric algorithm.
Update T3C HW support

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:11 -08:00
Divy Le Ray
3e5192eec8 cxgb3 - sysfs methods clean up
Remove unused argument in sysfs methods

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:10 -08:00
Divy Le Ray
23561c9447 cxgb3 - fix interaction with pktgen
Do not use skb->cb to stash unmap info,
save the info to the descriptor state.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:09 -08:00
Divy Le Ray
273fa9042c cxgb3 - FW upgrade
Bump up FW version to 5.0.
Do not downgrade FW within the same major version range.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:09 -08:00
Divy Le Ray
91a6b50cf6 cxgb3 - Add EEH support
Add PCI recovery support

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:08 -08:00
Divy Le Ray
67d92ab765 cxgb3 - Fix resources release.
Remove sysfs entries before unregistering the net devices.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:07 -08:00
Divy Le Ray
678771d6f5 cxgb3 - Use wild card for PCI subdevice ID match
Subdevice ID is not necessarily set to 1.
Use wild card for PCI device matching

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:07 -08:00
Divy Le Ray
42256f57d8 cxgb3 - fix MSI-X failure path
Return error code when msi-x settings fail.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:06 -08:00
Joe Perches
f07b2e403b drivers/net/cxgb3: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:03:55 -08:00
Divy Le Ray
75758e8aa4 cxgb3 - T3C support update
Update GPIO mapping for T3C.
Update xgmac for T3C support.
Fix typo in mtu table.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:00:36 -05:00
Jeff Garzik
7c2399756a [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate
Rather than hand-rolling our own prototype, make the code more
future-proof by using the standard irq_handler_t typedef.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-23 19:53:17 -04:00
Jiri Slaby
1977f03272 remove asm/bitops.h includes
remove asm/bitops.h includes

including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Stephen Hemminger
9265fabf0d cxgb3 sparse warning fixes
Fix warnings from sparse related to shadowed variables and routines
that should be declared static.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:29 -07:00
Adrian Bunk
0da18e3883 drivers/net/cxgb3/xgmac.c: remove dead code
This patch removes dead code ("tx_xcnt" can never be != 0 at this place)
spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:53:51 -07:00
Al Viro
fb8e4444cc cxgb3: trivial endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:52:06 -07:00
Jeff Garzik
b9f2c0440d [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count
These have been superceded by the new ->get_sset_count() hook.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:45 -07:00
Jeff Garzik
88d3aafdae [ETHTOOL] Provide default behaviors for a few ethtool sub-ioctls
For the operations
	get-tx-csum
	get-sg
	get-tso
	get-ufo
the default ethtool_op_xxx behavior is fine for all drivers, so we
permit op==NULL to imply the default behavior.

This provides a more uniform behavior across all drivers, eliminating
ethtool(8) "ioctl not supported" errors on older drivers that had
not been updated for the latest sub-ioctls.

The ethtool_op_xxx() functions are left exported, in case anyone
wishes to call them directly from a driver-private implementation --
a not-uncommon case.  Should an ethtool_op_xxx() helper remain unused
for a while, except by net/core/ethtool.c, we can un-export it at a
later date.

[ Resolved conflicts with set/get value ethtool patch... -DaveM ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:17 -07:00
Ralf Baechle
10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
Divy Le Ray
dc67369573 cxgb3 - Update engine microcode version
The new microcode engine version is set to 1.1.0

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:06 -07:00
Divy Le Ray
1aafee2657 cxgb3 - Add T3C rev
add driver recognition for T3C rev board.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:06 -07:00
Divy Le Ray
bb9366af7b cxgb3 - CQ context operations time out too soon.
Currently, the driver only tries up to 5 times (5us) to get the results
of a CQ context operation.  Testing has shown the chip can take as much
as 50us to return the response on SG_CONTEXT_CMD operations.  So we up
the retry count to 100 to cover high loads.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:05 -07:00
Divy Le Ray
1c17ae8af9 cxgb3 - Set the CQ_ERR bit in CQ contexts.
The cxgb3 driver is incorrectly configuring the HW CQ context for CQ's
that use overflow-avoidance.  Namely the RDMA control CQ.  This results
in a bad DMA from the device to bus address 0.  The solution is to set
the CQ_ERR bit in the context for these types of CQs.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:05 -07:00
Divy Le Ray
b4687ff753 cxgb3 - remove false positive in xgmac workaround
Qualify toggling of xgmac tx enable with not getting pause frames,
we might not make forward progress because the peer is sending
lots of pause frames.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:04 -07:00
Divy Le Ray
3eea3337a0 cxgb3 - log and clear PEX errors
Clear pciE PEX errors late at module load time.
Log details when PEX errors occur.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:03 -07:00
Divy Le Ray
a5a3b4601b cxgb3 - Firmware update
Update firmware version.
Allow the driver to be up and running with older FW image

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:03 -07:00
Divy Le Ray
3f61e4278c cxgb3 - Update internal memory management
Set PM1 internal memory to round robin mode
It balances access to this internal memory for multiport adapters.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:51 -07:00
Divy Le Ray
167cdf5fbc cxgb3 - log adapter serial number
Log HW serial number when cxgb3 module is loaded.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:50 -07:00
Divy Le Ray
c64c2eaeaa cxgb3 - Fatal error update
Stop the MAC when a fatal error is detected.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:50 -07:00
Divy Le Ray
c9a6ce500d cxgb3 - tighten checks on TID values
Enforce validity checks on connection ids

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:49 -07:00
Divy Le Ray
e22bb45d77 cxgb3 - Expose HW memory page info
A HW issue requires limiting the receive window size
to 23 pages of internal memory.
These pages can be configured to different sizes,
thus the RDMA driver needs to know the
page size to enforce the upper limit.

Also assign explicit enum values.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:49 -07:00
Divy Le Ray
27186dc325 cxgb3 - use immediate data for offload Tx
Send small TX_DATA work requests as immediate data even when
there are fragments. this avoids doing multiple DMAs for
small fragmented packets.
The driver already implements this optimization for small
contiguous packets.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:48 -07:00
Divy Le Ray
6e3f03b72c cxgb3 - SGE doorbell overflow warning
Log doorbell Fifo overflow

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:47 -07:00
Divy Le Ray
52b810d305 cxgb3 - Update rx coalescing length
Reduce Rx coalescing length to 12288
Large bursts from the adapter to the host create back pressure
on the chip. Reducing the burst size avoids the issue.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:47 -07:00
Divy Le Ray
b1c9e0f780 cxgb3 - MAC workaround update
Update the MAC workaround to deal with switches that do not
honor pause frames.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:28 -07:00
Denis Cheng
c54f5c2402 drivers/net/cxgb3: removed several unneeded zero initilization
Cc: linux-bugs@chelsio.com
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:20 -07:00
Stephen Hemminger
bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Divy Le Ray
4733007765 - cxgb3 engine microcode load
Load the engine microcode when an interface
is brought up, instead of of doing it when the module
is loaded.
Loosen up tight binding between the driver and the
engine microcode version.
There is no need for microcode update with T3A boards.
Fix the file naming.
Do a better job at logging the loading activity.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 07:29:08 -04:00
Divy Le Ray
5fbf816fe7 cxgb3 - Fix dev->priv usage
cxgb3 used netdev_priv() and dev->priv for different purposes.
In 2.6.23, netdev_priv() == dev->priv, cxgb3 needs a fix.
This patch is a partial backport of Dave Miller's changes in the
net-2.6.24 git branch.

Without this fix, cxgb3 crashes on 2.6.23.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 07:29:08 -04:00
Matthew Wilcox
313674afa8 [NET]: ethtool_perm_addr only has one implementation
All drivers implement ethtool get_perm_addr the same way -- by calling
the generic function.  So we can inline the generic function into the
caller and avoid going through the drivers.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 14:00:29 -07:00
Al Viro
1f41bb3a5a cxgb3 gfp_t annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Linus Torvalds
0cdf6990e9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (76 commits)
  IB: Update MAINTAINERS with Hal's new email address
  IB/mlx4: Implement query SRQ
  IB/mlx4: Implement query QP
  IB/cm: Send no match if a SIDR REQ does not match a listen
  IB/cm: Fix handling of duplicate SIDR REQs
  IB/cm: cm_msgs.h should include ib_cm.h
  IB/cm: Include HCA ACK delay in local ACK timeout
  IB/cm: Use spin_lock_irq() instead of spin_lock_irqsave() when possible
  IB/sa: Make sure SA queries use default P_Key
  IPoIB: Recycle loopback skbs instead of freeing and reallocating
  IB/mthca: Replace memset(<addr>, 0, PAGE_SIZE) with clear_page(<addr>)
  IPoIB/cm: Fix warning if IPV6 is not enabled
  IB/core: Take sizeof the correct pointer when calling kmalloc()
  IB/ehca: Improve latency by unlocking after triggering the hardware
  IB/ehca: Notify consumers of LID/PKEY/SM changes after nondisruptive events
  IB/ehca: Return QP pointer in poll_cq()
  IB/ehca: Change idr spinlocks into rwlocks
  IB/ehca: Refactor sync between completions and destroy_cq using atomic_t
  IB/ehca: Lock renaming, static initializers
  IB/ehca: Report RDMA atomic attributes in query_qp()
  ...
2007-07-12 16:45:40 -07:00
vignesh babu
d9da466a3c use is_power_of_2() in cxgb3/cxgb3_main.c
Replace (n & (n-1)) with is_power_of_2()

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10 12:22:30 -04:00
Steve Wise
de3d353072 RDMA/cxgb3: Streaming -> RDMA mode transition fixes
Due to a HW issue, our current scheme to transition the connection from
streaming to rdma mode is broken on the passive side.  The firmware
and driver now support a new transition scheme for the passive side:

 - driver posts rdma_init_wr (now including the initial receive seqno)
 - driver posts last streaming message via TX_DATA message (MPA start
   response)
 - uP atomically sends the last streaming message and transitions the
   tcb to rdma mode.
 - driver waits for wr_ack indicating the last streaming message was ACKed.

NOTE: This change also bumps the required firmware version to 4.3.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09 20:12:26 -07:00
Divy Le Ray
480fe1a31c cxgb3 - TP SRAM update
The chip executes microcode present in internal RAM,
whose content is loaded from EEPROM on power cycle.
This patch allows an update of the microcode through PIO
without forcing a power cycle.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Divy Le Ray
8a9fab22cf cxgb3 - Firmware update
Update FW to 4.1.
Proceed to subsequent HW tuning to improve RDMA perfs..

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Divy Le Ray
cf992af561 cxgb3 - sge page management
Streamline sge page management.
Fix dma mappings when buffers are recycled.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Divy Le Ray
549f800983 cxgb3 - fix register to stop bc/mc traffic
Use the right register to stop broadcast/multicast traffic.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27 02:33:06 -04:00
Divy Le Ray
2090dee420 cxgb3 - MAC watchdog update
Fix variables initialization and usage in the MAC watchdog.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:59 -04:00
Divy Le Ray
7b581a0fa8 cxgb3 - Stop mac RX when changing MTU
Rx traffic needs to be halted when the MTU is changed
to avoid a potential chip hang.
Reset/restore MAC filters around a MTU change.
Also fix the pause frames high materwark setting.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:59 -04:00
Divy Le Ray
c706bfb52a cxgb3 - Fix direct XAUI support
Check all lanes for link status on direct XAUI cards.
Don't assume that direct XAUI always uses XGMAC 1.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:58 -04:00
Divy Le Ray
890de33283 cxgb3 - fix netpoll hanlder
Fix netpoll handler to work with line interrupt, msi and msi-x.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:58 -04:00
Divy Le Ray
e360b5628f cxgb3 - fix skb->dev dereference
eth_type_trans() now sets skb->dev.
References to skb->dev should happen after it is called.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:58 -04:00
Stephen Hemminger
25805dcf9d network drivers: eliminate unneeded kill_vid code
Many drivers had code that did kill_vid, but they weren't doing vlan
filtering. With new API the stub is unneeded unless device sets
NETIF_F_HW_VLAN_FILTER.

Bad habit: I couldn't resist fixing a couple of nearby style things
in acenic, and forcedeth.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03 11:44:20 -04:00
Steve Wise
aff9e39d97 RDMA/cxgb3: Support for new abort logic
The HW now posts 2 ABORT_RPL and/or PEER_ABORT_REQ messages.  We need
to handle them by silenty dropping the 1st but mark that we're ready
for the final message.  This plugs some close races between the uP and
HW.  Also update the minimum required firmware version.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06 21:18:08 -07:00
Arnaldo Carvalho de Melo
27d7ff46a3 [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}
To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25 22:28:29 -07:00
Arnaldo Carvalho de Melo
d626f62b11 [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}
To clearly state the intent of copying from linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25 22:28:23 -07:00
Arnaldo Carvalho de Melo
27a884dc3c [SK_BUFF]: Convert skb->tail to sk_buff_data_t
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:28 -07:00
Arnaldo Carvalho de Melo
9c70220b73 [SK_BUFF]: Introduce skb_transport_header(skb)
For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:31 -07:00
Arnaldo Carvalho de Melo
aa8223c7bb [SK_BUFF]: Introduce tcp_hdr(), remove skb->h.th
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:26 -07:00
Arnaldo Carvalho de Melo
ea2ae17d64 [SK_BUFF]: Introduce skb_transport_offset()
For the quite common 'skb->h.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:16 -07:00
Arnaldo Carvalho de Melo
badff6d01a [SK_BUFF]: Introduce skb_reset_transport_header(skb)
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can
later turn skb->h.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple cases:

skb->h.raw = skb->data;
skb->h.raw = {skb_push|[__]skb_pull}()

The next ones will handle the slightly more "complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:15 -07:00
Arnaldo Carvalho de Melo
eddc9ec53b [SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:10 -07:00
Arnaldo Carvalho de Melo
bbe735e424 [SK_BUFF]: Introduce skb_network_offset()
For the quite common 'skb->nh.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:58 -07:00
Arnaldo Carvalho de Melo
c1d2bbe1cd [SK_BUFF]: Introduce skb_reset_network_header(skb)
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can
later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple case, next will handle the slightly more
"complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:46 -07:00
Arnaldo Carvalho de Melo
459a98ed88 [SK_BUFF]: Introduce skb_reset_mac_header(skb)
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can
later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple case, next will handle the slightly more
"complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:32 -07:00
Arnaldo Carvalho de Melo
4c13eb6657 [ETH]: Make eth_type_trans set skb->dev like the other *_type_trans
One less thing for drivers writers to worry about.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:30 -07:00
Divy Le Ray
1ca03cbc20 cxgb3 - PHY interrupts and GPIO pins.
Remove assumption that PHY interrupts use GPIOs 3 and 5.
Deal with PHY interrupts connected to any GPIO pins.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19 15:01:16 -04:00
Divy Le Ray
606fcd0b94 cxgb3 - Fix low memory conditions
Reuse the incoming skb when a clientless abort req is recieved.

The release of RDMA connections HW resources might be deferred in
low memory situations.
Ensure that no further activity is passed up to the RDMA driver
for these connections.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19 15:01:16 -04:00
Divy Le Ray
6cdbd77e88 cxgb3 - missing CPL hanler and register setting.
Remove specific CPL handler.
Add missing CPL handler.
Add missing register setting when the interface is brought up.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:43 -04:00
Divy Le Ray
59cf81076a cxgb3 - MAC watchdog update
The MAC watchdog was failing if the peer interface was brought down.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:43 -04:00
Divy Le Ray
f2d961c982 cxgb3 - avoid deadlock with mac watchdog
Fix a deadlock when the interface s configured down and
the watchdog tack is sleeping on rtnl_lock.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:43 -04:00
Divy Le Ray
7f672cf5b2 cxgb3 - Firwmare update
Introduce FW micro version.
Bump up FW version to 3.3.0

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03 22:31:09 -04:00
Divy Le Ray
6d6dabac38 cxgb3 - Tighten xgmac workaround
Run the watchdog task when the link is up.
Flush the XGMAC Tx FIFO when the link drops.

Also remove a statistics update that should have gone
in the previous modification of xgmac.c.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03 22:31:09 -04:00
Divy Le Ray
8ac3ba68e2 cxgb3 - detect NIC only adapters
Differentiate NIC only adapters from RNICs.
Initialize offload capabilities for RNICs only.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03 22:31:09 -04:00
Divy Le Ray
9f238486f5 cxgb3 - Safeguard TCAM size usage
Ensure that the TCAM active region size is at least 16.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03 22:31:09 -04:00
Divy Le Ray
e4d08359ff cxgb3 - T3B2 pcie config space
T3B2 does not lose its pcie config space on reset.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:34 -04:00
Divy Le Ray
fc90664e34 cxgb3 - Fix potential MAC hang
Under rare conditions, the MAC might hang while generating a pause frame.
This patch fine tunes the MAC settings to avoid the issue, allows for
periodic MAC state check, and triggers a recovery if hung.

Also fix one MAC statistics counter for the rev board T3B2.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:34 -04:00
Divy Le Ray
2e2839627a cxgb3 - Auto-load FW if mismatch detected
The driver attempts to upgrade the FW if the card has the wrong version.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:33 -04:00
Divy Le Ray
05b97b30b0 cxgb3 - fix ethtool cmd on multiple queues port
Limit ethtool -g/-G to the given port's queues.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:33 -04:00
Dan Aloni
5c15bdec5c [VLAN]: Avoid a 4-order allocation.
This patch splits the vlan_group struct into a multi-allocated struct. On
x86_64, the size of the original struct is a little more than 32KB, causing
a 4-order allocation, which is prune to problems caused by buddy-system
external fragmentation conditions.

I couldn't just use vmalloc() because vfree() cannot be called in the
softirq context of the RCU callback.

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 20:44:51 -08:00
Divy Le Ray
d518725fa6 cxgb3 - Tag driver version
This patch adds a "-ko" tag to the driver version.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 19:55:07 -05:00
Divy Le Ray
e0994eb1d9 cxgb3 - Feed Rx free list with pages
Populate Rx free list with pages.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Divy Le Ray
bae73f4447 cxgb3 - Recovery from HW starvation of response queue entries.
Improve the traffic recovery after the HW ran out of response queue entries.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Divy Le Ray
99d7cf30b9 cxgb3 - Unmap offload packets when they are freed
Offload packets may be DMAed long after their SGE Tx descriptors are done
so they must remain mapped until they are freed rather than until their
descriptors are freed.  Unmap such packets through an skb destructor.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Divy Le Ray
75d8626fdd cxgb3 - FW version update
Update FW version to 3.2

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Divy Le Ray
1825494a7e cxgb3 - private ioctl cleanup
Clean up some private ioctls.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Divy Le Ray
896392ef94 cxgb3 - manage sysfs attributes per port
sysfs attributes are now managed per port, no longer per adapter.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:27:12 -05:00
Steve Wise
0f4e7b45b9 cxgb3 Fix copyrights in the cxgb3 driver.
Fix copyrights in the cxgb3 driver.

Remove the Open Grid Computing copyright.  It shouldn't be there.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:46 -05:00
Thomas Gleixner
2db6346f76 [PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2
The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users in -mm.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:55 -08:00
Al Viro
b53449725a [PATCH] trivial cxgb3 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:08 -08:00
Divy Le Ray
0ee8d33c64 cxgb3: sysfs attributes in -mm tree
This patch fixes the usage of sysfs attributes in cxgb3 for the -mm tree.
It is built against the driver commited in the -mm tree.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-08 20:13:10 -05:00
Divy Le Ray
1d68e93d65 cxgb3 - Add dual licensing
Dual licensing, needed for OFED 1.2

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
a13fbee086 cxgb3 - Add <linux/mutex.h>
Include <linux/mutex.h> in adapter.h

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
f2aa52086f cxgb3 - Remove BUG_ON from t3b_intr_napi
In some cases, SG_DATA_INTR won't clear on read and the following
interrupt may cause us to assert because NAPI is already scheduled.
Remove the assertion, NAPI can handle attempts to rearm it while
it's already scheduled.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
f2c6879e06 cxgb3 - white space to tabs
Use tabs in comments.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
3b1d307b31 cxgb3 - Clean up HW init routine
Clean up the tp_config() routine.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:50 -05:00
Divy Le Ray
b5a44bcbf5 cxgb3 - bogus status error string
Remove a status error string from the pci-x context
and add it where it belongs - the pci-e context.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:50 -05:00
Divy Le Ray
6195c71d65 cxgb3 - remove SW Tx credits coalescing
Remove tx credit coalescing done in SW.
The HW is caring care of it already.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:50 -05:00
Divy Le Ray
14ab989245 cxgb3 - bind qsets on multiport adapter
Inform FW about the queue set->interface mapping.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:50 -05:00
Divy Le Ray
4aac389908 cxgb3 - FW versioning
Clean up FW version checking.
The supported FW version is now 3.1.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:49 -05:00
Divy Le Ray
4d22de3e6c Add support for the latest 1G/10G Chelsio adapter, T3.
This driver is required by the Chelsio T3 RDMA driver posted by
Steve Wise.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:46 -05:00