dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ARM: arm-soc: Header cleanups 

This is a collection of header file cleanups, mostly for OMAP and AT91,
 that keeps moving the platforms in the direction of multiplatform by
 removing the need for mach-dependent header files used in drivers and
 other places.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2reAAoJEIwa5zzehBx3Z/oQAIHp8aXbUD0GvbBPQ2vIydZ8
 Qfdh2ypbyFB9GSLmPP6BhurEFUcwmW3MH2r9Kq68omPt4XxrFEt1SdEn3TgZlhTY
 YYzEv2DLbWfmKCDBFAEFullsfVkrpggyou5ty30YVp/u2lVLvChpkciE5/9HADy5
 uoh/W2KZcLE51tvnbRy/1DBaOtxEdCjJ9hTaef7FCB9ugOG+yMDYwIPRW/b4fNA6
 o/1NuZTWp0H4ePRG2oqLxYnjSiF63DVTJZjSJ+c5gW34bWgh8+/xzaLFA9U++/ig
 meGUD1Oe65+ctr+Wk2mV29eb02jauUe6qvkwt+iFIDDopgc2mn5BcW+ENpgpjhe3
 6l3ClRd94qh4cMWzqDa5PZCdetshiKqSH2IGpKS/dHNB1h5sBP7CCbvbalwzWd5n
 qjfkPC7kSFyU3XV+9SEAXE6HLKsiMQy9kRcKOMdTE5BA4FEAZk0wfiG9WcVCvS2D
 9tDC3X0aScyXx4Mkd4wIAZVhY68QuI17fPft9zZSj691YiUW5cR2yF1qbCka0yd5
 pHu/QSZg1+dUitMUvMPQmWJ15jnAtEYUtV/8zQFFVchgkxlrW+UtvW3zxghB6D+J
 ZwcjAMfQQz9fLoMQXlVovjQIhYsjw3SlV62ReBH7eyPs3+KfPIBn7Ks6mVQs3dS5
 AMUWORsB5u92XHl9EL9C
 =aggA
 -----END PGP SIGNATURE-----

Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...
This commit is contained in:
Linus Torvalds 2012-12-12 11:45:16 -08:00
parent 2989950cea 8556650dd3
commit 8287361abc
447 changed files with 8693 additions and 8552 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/Kconfig
View File

@ -945,7 +945,6 @@ config ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).

106
arch/arm/configs/afeb9260_defconfig
View File

@ -1,106 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DEBUG=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_CRC_T10DIF=y

173
arch/arm/configs/cam60_defconfig
View File

@ -1,173 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_CAM60=y
CONFIG_ZBOOT_ROM_BSS=0x20004000
CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_SERIO_SERPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m

116
arch/arm/configs/cpu9260_defconfig
View File

@ -1,116 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_CPU9260=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set

116
arch/arm/configs/cpu9g20_defconfig
View File

@ -1,116 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_CPU9G20=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set

114
arch/arm/configs/qil-a9260_defconfig
View File

@ -1,114 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AT91_EARLY_USART0=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_FUSE_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
# CONFIG_CRYPTO_HW is not set

148
arch/arm/configs/sam9_l9260_defconfig
View File

@ -1,148 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_AUDIT=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=25
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_V3020=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_LL=y

128
arch/arm/configs/stamp9g20_defconfig
View File

@ -1,128 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_PORTUXG20=y
CONFIG_MACH_STAMP9G20=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_KEXEC=y
CONFIG_CPU_IDLE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_W1=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=m
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_ARM_UNWIND is not set

105
arch/arm/configs/usb-a9260_defconfig
View File

@ -1,105 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_MACH_USB_A9260=y
CONFIG_AT91_SLOW_CLOCK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_FUSE_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
# CONFIG_CRYPTO_HW is not set

0
arch/arm/mach-at91/include/mach/at91_aic.h → arch/arm/mach-at91/at91_aic.h
View File

0
arch/arm/mach-at91/include/mach/at91_rstc.h → arch/arm/mach-at91/at91_rstc.h
View File

0
arch/arm/mach-at91/include/mach/at91_shdwc.h → arch/arm/mach-at91/at91_shdwc.h
View File

0
arch/arm/mach-at91/include/mach/at91_tc.h → arch/arm/mach-at91/at91_tc.h
View File

2
arch/arm/mach-at91/at91rm9200.c
View File

@ -17,11 +17,11 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -18,11 +18,11 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/at91sam9260.c
View File

@ -20,10 +20,10 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91sam9260_devices.c
View File

@ -19,7 +19,6 @@
#include <linux/platform_data/at91_adc.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
@ -27,6 +26,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/at91_adc.h>
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/at91sam9261.c
View File

@ -19,10 +19,10 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -21,12 +21,12 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/at91sam9263.c
View File

@ -18,10 +18,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -20,12 +20,12 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "board.h"
#include "generic.h"

12
arch/arm/mach-at91/at91sam926x_time.c
View File

@ -20,8 +20,18 @@
#include <asm/mach/time.h>
#include <mach/at91_pit.h>
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
#define AT91_PIT_SR 0x04 /* Status Register */
#define AT91_PIT_PITS (1 << 0) /* Timer Status */
#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)

2
arch/arm/mach-at91/at91sam9_alt_reset.S
View File

@ -16,7 +16,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
#include <mach/at91_rstc.h>
#include "at91_rstc.h"
.arm

2
arch/arm/mach-at91/at91sam9g45.c
View File

@ -18,10 +18,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -26,7 +26,6 @@
#include <video/atmel_lcdc.h>
#include <mach/at91_adc.h>
#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
@ -36,6 +35,7 @@
#include <media/atmel-isi.h>
#include "board.h"
#include "generic.h"
#include "clock.h"

3
arch/arm/mach-at91/at91sam9g45_reset.S
View File

@ -13,8 +13,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
#include <mach/at91_rstc.h>
#include "at91_rstc.h"
.arm
.globl at91sam9g45_restart

2
arch/arm/mach-at91/at91sam9n12.c
View File

@ -15,8 +15,8 @@
#include <mach/at91sam9n12.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include <mach/board.h>
#include "board.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

4
arch/arm/mach-at91/at91sam9rl.c
View File

@ -19,10 +19,10 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

2
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -17,13 +17,13 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
#include "board.h"
#include "generic.h"

2
arch/arm/mach-at91/at91sam9x5.c
View File

@ -15,8 +15,8 @@
#include <mach/at91sam9x5.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include <mach/board.h>
#include "board.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"

3
arch/arm/mach-at91/at91x40.c
View File

@ -18,9 +18,10 @@
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_aic.h>
#include <mach/at91_st.h>
#include <mach/timex.h>
#include "at91_aic.h"
#include "generic.h"
/*

3
arch/arm/mach-at91/at91x40_time.c
View File

@ -26,7 +26,8 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/at91_tc.h>
#include "at91_tc.h"
#define at91_tc_read(field) \
__raw_readl(AT91_IO_P2V(AT91_TC) + field)

4
arch/arm/mach-at91/board-1arm.c
View File

@ -34,10 +34,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

5
arch/arm/mach-at91/board-afeb-9260v1.c
View File

@ -43,9 +43,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-cam60.c
View File

@ -38,10 +38,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-carmeva.c
View File

@ -35,9 +35,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-cpu9krea.c
View File

@ -40,12 +40,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-cpuat91.c
View File

@ -36,12 +36,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static struct gpio_led cpuat91_leds[] = {

4
arch/arm/mach-at91/board-csb337.c
View File

@ -38,9 +38,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-csb637.c
View File

@ -35,9 +35,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

5
arch/arm/mach-at91/board-dt.c
View File

@ -15,15 +15,14 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

5
arch/arm/mach-at91/board-eb01.c
View File

@ -27,8 +27,9 @@
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init at91eb01_init_irq(void)

5
arch/arm/mach-at91/board-eb9200.c
View File

@ -35,9 +35,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-ecbat91.c
View File

@ -37,10 +37,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-eco920.c
View File

@ -24,12 +24,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init eco920_init_early(void)

4
arch/arm/mach-at91/board-flexibity.c
View File

@ -33,9 +33,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init flexibity_init_early(void)

4
arch/arm/mach-at91/board-foxg20.c
View File

@ -41,10 +41,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

8
arch/arm/mach-at91/board-gsia18s.c
View File

@ -30,14 +30,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/gsia18s.h>
#include <mach/stamp9g20.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "gsia18s.h"
#include "stamp9g20.h"
static void __init gsia18s_init_early(void)
{

4
arch/arm/mach-at91/board-kafa.c
View File

@ -34,10 +34,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-kb9202.c
View File

@ -35,12 +35,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-neocore926.c
View File

@ -44,10 +44,10 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-pcontrol-g20.c
View File

@ -29,13 +29,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/stamp9g20.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "stamp9g20.h"
static void __init pcontrol_g20_init_early(void)

4
arch/arm/mach-at91/board-picotux200.c
View File

@ -37,11 +37,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

6
arch/arm/mach-at91/board-qil-a9260.c
View File

@ -40,11 +40,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-rm9200dk.c
View File

@ -39,11 +39,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -39,11 +39,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

4
arch/arm/mach-at91/board-rsi-ews.c
View File

@ -25,11 +25,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <linux/gpio.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init rsi_ews_init_early(void)

4
arch/arm/mach-at91/board-sam9-l9260.c
View File

@ -37,10 +37,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-sam9260ek.c
View File

@ -41,12 +41,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -45,12 +45,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -44,12 +44,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-sam9g20ek.c
View File

@ -43,11 +43,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -42,12 +42,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

7
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -30,11 +30,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-snapper9260.c
View File

@ -32,10 +32,10 @@
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -25,10 +25,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

6
arch/arm/mach-at91/board-usb-a926x.c
View File

@ -41,11 +41,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"

4
arch/arm/mach-at91/board-yl-9200.c
View File

@ -43,12 +43,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"

55
arch/arm/mach-at91/include/mach/board.h → arch/arm/mach-at91/board.h
View File

@ -31,42 +31,15 @@
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
#include <linux/mtd/partitions.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
#include <linux/atmel-mci.h>
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
#include <linux/platform_data/atmel.h>
/* USB Device */
struct at91_udc_data {
int vbus_pin; /* high == host powering us */
u8 vbus_active_low; /* vbus polarity */
u8 vbus_polled; /* Use polling, not interrupt */
int pullup_pin; /* active == D+ pulled up */
u8 pullup_active_low; /* true == pullup_pin is active low */
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* USB High Speed Device */
extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
struct at91_cf_data {
int irq_pin; /* I/O IRQ */
int det_pin; /* Card detect */
int vcc_pin; /* power switching */
int rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
u8 flags;
#define AT91_CF_TRUE_IDE 0x01
#define AT91_IDE_SWAP_A0_A2 0x02
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
@ -76,16 +49,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
#define AT91_MAX_USBH_PORTS 3
struct at91_usbh_data {
int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
int overcurrent_pin[AT91_MAX_USBH_PORTS];
u8 ports; /* number of ports on root hub */
u8 overcurrent_supported;
u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
u8 overcurrent_status[AT91_MAX_USBH_PORTS];
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
@ -114,13 +77,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin
extern struct platform_device *atmel_default_console_device;
struct atmel_uart_data {
int num; /* port num */
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
struct serial_rs485 rs485; /* rs485 settings */
};
extern void __init at91_add_device_serial(void);
/*
@ -163,24 +119,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck);
/* Touchscreen Controller */
struct at91_tsadcc_data {
unsigned int adc_clock;
u8 pendet_debounce;
u8 ts_sample_hold_time;
};
extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
/* CAN */
struct at91_can_data {
void (*transceiver_switch)(int on);
};
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
#endif

0
arch/arm/mach-at91/include/mach/gsia18s.h → arch/arm/mach-at91/gsia18s.h
View File

32
arch/arm/mach-at91/include/mach/at91_pit.h
View File

@ -1,32 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91_pit.h
*
* Copyright (C) 2007 Andrew Victor
* Copyright (C) 2007 Atmel Corporation.
*
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_PIT_H
#define AT91_PIT_H
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
#define AT91_PIT_SR 0x04 /* Status Register */
#define AT91_PIT_PITS (1 << 0) /* Timer Status */
#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
#endif

3
arch/arm/mach-at91/include/mach/hardware.h
View File

@ -90,9 +90,6 @@
#define AT91_SRAM_MAX SZ_1M
#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
/* Serial ports */
#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
/* External Memory Map */
#define AT91_CHIPSELECT_0 0x10000000
#define AT91_CHIPSELECT_1 0x20000000

2
arch/arm/mach-at91/irq.c
View File

@ -42,7 +42,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <mach/at91_aic.h>
#include "at91_aic.h"
void __iomem *at91_aic_base;
static struct irq_domain *at91_aic_domain;

2
arch/arm/mach-at91/leds.c
View File

@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/board.h>
#include "board.h"
/* ------------------------------------------------------------------------- */

6
arch/arm/mach-at91/pm.c
View File

@ -25,10 +25,10 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
@ -36,8 +36,8 @@
* Show the reason for the previous system reset.
*/
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "at91_rstc.h"
#include "at91_shdwc.h"
static void __init show_reset_status(void)
{

2
arch/arm/mach-at91/setup.c
View File

@ -19,8 +19,8 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
#include <mach/at91_shdwc.h>
#include "at91_shdwc.h"
#include "soc.h"
#include "generic.h"

0
arch/arm/mach-at91/include/mach/stamp9g20.h → arch/arm/mach-at91/stamp9g20.h
View File

3
arch/arm/mach-omap1/Makefile
View File

@ -3,7 +3,8 @@
#
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)

1
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,

9
arch/arm/mach-omap1/board-fsample.c
View File

@ -27,16 +27,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
/* fsample is pretty close to p2-sample */
@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
static void __init fsample_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,

1
arch/arm/mach-omap1/board-generic.c
View File

@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,

5
arch/arm/mach-omap1/board-h2-mmc.c
View File

@ -13,12 +13,11 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
#include "board-h2.h"
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

6
arch/arm/mach-omap1/board-h2.c
View File

@ -39,8 +39,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
@ -50,6 +50,7 @@
#include "common.h"
#include "board-h2.h"
#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,

3
arch/arm/mach-omap1/board-h3-mmc.c
View File

@ -16,9 +16,8 @@
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
#include "board-h3.h"
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

5
arch/arm/mach-omap1/board-h3.c
View File

@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,

3
arch/arm/mach-omap1/board-htcherald.c
View File

@ -43,7 +43,7 @@
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
#include <plat/mmc.h>
#include "mmc.h"
#include <mach/irqs.h>
#include <mach/usb.h>
@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
.atag_offset = 0x100,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,

30
arch/arm/mach-omap1/board-innovator.c
View File

@ -33,16 +33,15 @@
#include <mach/mux.h>
#include <mach/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
#include "mmc.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
static int innovator_get_pendown_state(void)
{
return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
@ -390,14 +389,14 @@ static void __init innovator_init(void)
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
reg = fpga_read(OMAP1510_FPGA_POWER);
reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
fpga_write(reg, OMAP1510_FPGA_POWER);
__raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
reg = fpga_read(OMAP1510_FPGA_POWER);
reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
fpga_write(reg, OMAP1510_FPGA_POWER);
__raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@ -437,6 +436,7 @@ static void __init innovator_init(void)
*/
static void __init innovator_map_io(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@ -444,9 +444,10 @@ static void __init innovator_map_io(void)
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
fpga_read(OMAP1510_FPGA_REV_HIGH),
fpga_read(OMAP1510_FPGA_REV_LOW),
fpga_read(OMAP1510_FPGA_BOARD_REV));
__raw_readb(OMAP1510_FPGA_REV_HIGH),
__raw_readb(OMAP1510_FPGA_REV_LOW),
__raw_readb(OMAP1510_FPGA_BOARD_REV));
#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.atag_offset = 0x100,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,

5
arch/arm/mach-omap1/board-nokia770.c
View File

@ -29,13 +29,13 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#include "clock.h"
#include "mmc.h"
#define ADS7846_PENDOWN_GPIO 15
@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,

3
arch/arm/mach-omap1/board-osk.c
View File

@ -48,7 +48,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,

6
arch/arm/mach-omap1/board-palmte.c
View File

@ -36,8 +36,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <mach/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,

8
arch/arm/mach-omap1/board-palmtt.c
View File

@ -28,16 +28,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/led.h>
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,

6
arch/arm/mach-omap1/board-palmz71.c
View File

@ -38,8 +38,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@ -47,6 +47,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,

9
arch/arm/mach-omap1/board-perseus2.c
View File

@ -28,15 +28,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,

3
arch/arm/mach-omap1/board-sx1-mmc.c
View File

@ -16,9 +16,10 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <mach/board-sx1.h>
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,

6
arch/arm/mach-omap1/board-sx1.c
View File

@ -36,15 +36,16 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,

3
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -34,7 +34,7 @@
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,

507
arch/arm/mach-omap1/clock.c
View File

@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
@ -21,21 +22,21 @@
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
#include <mach/hardware.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
/*
* Omap1 specific clock functions
*/
@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk)
}
#endif
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
ret = omap1_clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->usecount == 0) {
pr_err("Trying disable clock %s with 0 usecount\n",
clk->name);
WARN_ON(1);
goto out;
}
omap1_clk_disable(clk);
out:
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
unsigned long ret;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = clk->rate;
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_get_rate);
/*
* Optional clock functions defined in include/linux/clk.h
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
long ret;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = omap1_clk_round_rate(clk, rate);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
ret = omap1_clk_set_rate(clk, rate);
if (ret == 0)
propagate_rate(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
return -EINVAL;
}
EXPORT_SYMBOL(clk_set_parent);
struct clk *clk_get_parent(struct clk *clk)
{
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
/*
* OMAP specific clock functions shared between omap1 and omap2
*/
int __initdata mpurate;
/*
* By default we use the rate set by the bootloader.
* You can override this with mpurate= cmdline option.
*/
static int __init omap_clk_setup(char *str)
{
get_option(&str, &mpurate);
if (!mpurate)
return 1;
if (mpurate < 1000)
mpurate *= 1000000;
return 1;
}
__setup("mpurate=", omap_clk_setup);
/* Used for clocks that always have same value as the parent clock */
unsigned long followparent_recalc(struct clk *clk)
{
return clk->parent->rate;
}
/*
* Used for clocks that have the same value as the parent clock,
* divided by some factor
*/
unsigned long omap_fixed_divisor_recalc(struct clk *clk)
{
WARN_ON(!clk->fixed_div);
return clk->parent->rate / clk->fixed_div;
}
void clk_reparent(struct clk *child, struct clk *parent)
{
list_del_init(&child->sibling);
if (parent)
list_add(&child->sibling, &parent->children);
child->parent = parent;
/* now do the debugfs renaming to reattach the child
to the proper parent */
}
/* Propagate rate to children */
void propagate_rate(struct clk *tclk)
{
struct clk *clkp;
list_for_each_entry(clkp, &tclk->children, sibling) {
if (clkp->recalc)
clkp->rate = clkp->recalc(clkp);
propagate_rate(clkp);
}
}
static LIST_HEAD(root_clks);
/**
* recalculate_root_clocks - recalculate and propagate all root clocks
*
* Recalculates all root clocks (clocks with no parent), which if the
* clock's .recalc is set correctly, should also propagate their rates.
* Called at init.
*/
void recalculate_root_clocks(void)
{
struct clk *clkp;
list_for_each_entry(clkp, &root_clks, sibling) {
if (clkp->recalc)
clkp->rate = clkp->recalc(clkp);
propagate_rate(clkp);
}
}
/**
* clk_preinit - initialize any fields in the struct clk before clk init
* @clk: struct clk * to initialize
*
* Initialize any struct clk fields needed before normal clk initialization
* can run. No return value.
*/
void clk_preinit(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
}
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
/*
* trap out already registered clocks
*/
if (clk->node.next || clk->node.prev)
return 0;
mutex_lock(&clocks_mutex);
if (clk->parent)
list_add(&clk->sibling, &clk->parent->children);
else
list_add(&clk->sibling, &root_clks);
list_add(&clk->node, &clocks);
if (clk->init)
clk->init(clk);
mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
mutex_lock(&clocks_mutex);
list_del(&clk->sibling);
list_del(&clk->node);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
void clk_enable_init_clocks(void)
{
struct clk *clkp;
list_for_each_entry(clkp, &clocks, node)
if (clkp->flags & ENABLE_ON_INIT)
clk_enable(clkp);
}
/**
* omap_clk_get_by_name - locate OMAP struct clk by its name
* @name: name of the struct clk to locate
*
* Locate an OMAP struct clk by its name. Assumes that struct clk
* names are unique. Returns NULL if not found or a pointer to the
* struct clk if found.
*/
struct clk *omap_clk_get_by_name(const char *name)
{
struct clk *c;
struct clk *ret = NULL;
mutex_lock(&clocks_mutex);
list_for_each_entry(c, &clocks, node) {
if (!strcmp(c->name, name)) {
ret = c;
break;
}
}
mutex_unlock(&clocks_mutex);
return ret;
}
int omap_clk_enable_autoidle_all(void)
{
struct clk *c;
unsigned long flags;
spin_lock_irqsave(&clockfw_lock, flags);
list_for_each_entry(c, &clocks, node)
if (c->ops->allow_idle)
c->ops->allow_idle(c);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
int omap_clk_disable_autoidle_all(void)
{
struct clk *c;
unsigned long flags;
spin_lock_irqsave(&clockfw_lock, flags);
list_for_each_entry(c, &clocks, node)
if (c->ops->deny_idle)
c->ops->deny_idle(c);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
/*
* Low level helpers
*/
static int clkll_enable_null(struct clk *clk)
{
return 0;
}
static void clkll_disable_null(struct clk *clk)
{
}
const struct clkops clkops_null = {
.enable = clkll_enable_null,
.disable = clkll_disable_null,
};
/*
* Dummy clock
*
* Used for clock aliases that are needed on some OMAPs, but not others
*/
struct clk dummy_ck = {
.name = "dummy",
.ops = &clkops_null,
};
/*
*
*/
#ifdef CONFIG_OMAP_RESET_CLOCKS
/*
* Disable any unused clocks left on by the bootloader
*/
static int __init clk_disable_unused(void)
{
struct clk *ck;
unsigned long flags;
pr_info("clock: disabling unused clocks to save power\n");
spin_lock_irqsave(&clockfw_lock, flags);
list_for_each_entry(ck, &clocks, node) {
if (ck->ops == &clkops_null)
continue;
if (ck->usecount > 0 || !ck->enable_reg)
continue;
omap1_clk_disable_unused(ck);
}
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
late_initcall(clk_disable_unused);
late_initcall(omap_clk_enable_autoidle_all);
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
/*
* debugfs support to trace clock tree hierarchy and attributes
*/
#include <linux/debugfs.h>
#include <linux/seq_file.h>
static struct dentry *clk_debugfs_root;
static int clk_dbg_show_summary(struct seq_file *s, void *unused)
{
struct clk *c;
struct clk *pa;
mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
list_for_each_entry(c, &clocks, node) {
pa = c->parent;
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate,
c->usecount);
}
mutex_unlock(&clocks_mutex);
return 0;
}
static int clk_dbg_open(struct inode *inode, struct file *file)
{
return single_open(file, clk_dbg_show_summary, inode->i_private);
}
static const struct file_operations debug_clock_fops = {
.open = clk_dbg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int clk_debugfs_register_one(struct clk *c)
{
int err;
struct dentry *d;
struct clk *pa = c->parent;
d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
if (!d)
return -ENOMEM;
c->dent = d;
d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
if (!d) {
err = -ENOMEM;
goto err_out;
}
d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
if (!d) {
err = -ENOMEM;
goto err_out;
}
d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
if (!d) {
err = -ENOMEM;
goto err_out;
}
return 0;
err_out:
debugfs_remove_recursive(c->dent);
return err;
}
static int clk_debugfs_register(struct clk *c)
{
int err;
struct clk *pa = c->parent;
if (pa && !pa->dent) {
err = clk_debugfs_register(pa);
if (err)
return err;
}
if (!c->dent) {
err = clk_debugfs_register_one(c);
if (err)
return err;
}
return 0;
}
static int __init clk_debugfs_init(void)
{
struct clk *c;
struct dentry *d;
int err;
d = debugfs_create_dir("clock", NULL);
if (!d)
return -ENOMEM;
clk_debugfs_root = d;
list_for_each_entry(c, &clocks, node) {
err = clk_debugfs_register(c);
if (err)
goto err_out;
}
d = debugfs_create_file("summary", S_IRUGO,
d, NULL, &debug_clock_fops);
if (!d)
return -ENOMEM;
return 0;
err_out:
debugfs_remove_recursive(clk_debugfs_root);
return err;
}
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */

178
arch/arm/mach-omap1/clock.h
View File

@ -14,8 +14,184 @@
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/clock.h>
#include <linux/clkdev.h>
struct module;
struct clk;
struct omap_clk {
u16 cpu;
struct clk_lookup lk;
};
#define CLK(dev, con, ck, cp) \
{ \
.cpu = cp, \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
/* Platform flags for the clkdev-OMAP integration code */
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
/* Temporary, needed during the common clock framework conversion */
#define __clk_get_name(clk) (clk->name)
#define __clk_get_parent(clk) (clk->parent)
#define __clk_get_rate(clk) (clk->rate)
/**
* struct clkops - some clock function pointers
* @enable: fn ptr that enables the current clock in hardware
* @disable: fn ptr that enables the current clock in hardware
* @find_idlest: function returning the IDLEST register for the clock's IP blk
* @find_companion: function returning the "companion" clk reg for the clock
* @allow_idle: fn ptr that enables autoidle for the current clock in hardware
* @deny_idle: fn ptr that disables autoidle for the current clock in hardware
*
* A "companion" clk is an accompanying clock to the one being queried
* that must be enabled for the IP module connected to the clock to
* become accessible by the hardware. Neither @find_idlest nor
* @find_companion should be needed; that information is IP
* block-specific; the hwmod code has been created to handle this, but
* until hwmod data is ready and drivers have been converted to use PM
* runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
* @find_companion must, unfortunately, remain.
*/
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
void (*find_idlest)(struct clk *, void __iomem **,
u8 *, u8 *);
void (*find_companion)(struct clk *, void __iomem **,
u8 *);
void (*allow_idle)(struct clk *);
void (*deny_idle)(struct clk *);
};
/*
* struct clk.flags possibilities
*
* XXX document the rest of the clock flags here
*
* CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
* bits share the same register. This flag allows the
* omap4_dpllmx*() code to determine which GATE_CTRL bit field
* should be used. This is a temporary solution - a better approach
* would be to associate clock type-specific data with the clock,
* similar to the struct dpll_data approach.
*/
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
#define CLOCK_IDLE_CONTROL (1 << 1)
#define CLOCK_NO_IDLE_PARENT (1 << 2)
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
#define CLOCK_CLKOUTX2 (1 << 5)
/**
* struct clk - OMAP struct clk
* @node: list_head connecting this clock into the full clock list
* @ops: struct clkops * for this clock
* @name: the name of the clock in the hardware (used in hwmod data and debug)
* @parent: pointer to this clock's parent struct clk
* @children: list_head connecting to the child clks' @sibling list_heads
* @sibling: list_head connecting this clk to its parent clk's @children
* @rate: current clock rate
* @enable_reg: register to write to enable the clock (see @enable_bit)
* @recalc: fn ptr that returns the clock's current rate
* @set_rate: fn ptr that can change the clock's current rate
* @round_rate: fn ptr that can round the clock's current rate
* @init: fn ptr to do clock-specific initialization
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
* @usecount: number of users that have requested this clock to be enabled
* @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
* @flags: see "struct clk.flags possibilities" above
* @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
* @src_offset: bitshift for source selection bitfield (OMAP1 only)
*
* XXX @rate_offset, @src_offset should probably be removed and OMAP1
* clock code converted to use clksel.
*
* XXX @usecount is poorly named. It should be "enable_count" or
* something similar. "users" in the description refers to kernel
* code (core code or drivers) that have called clk_enable() and not
* yet called clk_disable(); the usecount of parent clocks is also
* incremented by the clock code when clk_enable() is called on child
* clocks and decremented by the clock code when clk_disable() is
* called on child clocks.
*
* XXX @clkdm, @usecount, @children, @sibling should be marked for
* internal use only.
*
* @children and @sibling are used to optimize parent-to-child clock
* tree traversals. (child-to-parent traversals use @parent.)
*
* XXX The notion of the clock's current rate probably needs to be
* separated from the clock's target rate.
*/
struct clk {
struct list_head node;
const struct clkops *ops;
const char *name;
struct clk *parent;
struct list_head children;
struct list_head sibling; /* node for children */
unsigned long rate;
void __iomem *enable_reg;
unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
u8 enable_bit;
s8 usecount;
u8 fixed_div;
u8 flags;
u8 rate_offset;
u8 src_offset;
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
struct dentry *dent; /* For visible tree hierarchy */
#endif
};
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
};
extern int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);
extern const struct clkops clkops_null;
extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);

16
arch/arm/mach-omap1/clock_data.c
View File

@ -22,16 +22,14 @@
#include <asm/mach-types.h> /* for machine_is_* */
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include "soc.h"
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = {
* init
*/
static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
.clk_set_rate = omap1_clk_set_rate,
.clk_disable_unused = omap1_clk_disable_unused,
};
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@ -803,8 +793,6 @@ int __init omap1_clk_init(void)
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;

7
arch/arm/mach-omap1/common.h
View File

@ -26,8 +26,10 @@
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
#include <plat/common.h>
#include <linux/mtd/mtd.h>
#include <linux/i2c-omap.h>
#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void)
#endif
#ifdef CONFIG_ARCH_OMAP15XX
void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
@ -90,4 +93,6 @@ extern int ocpi_enable(void);
static inline int ocpi_enable(void) { return 0; }
#endif
extern int omap1_get_reset_sources(void);
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

Some files were not shown because too many files have changed in this diff Show More