dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/sound/soc/soc-cache.c

341 lines
7.8 KiB
C
Raw Normal View History

ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 16:24:50 +00:00
/*
* soc-cache.c -- ASoC register cache helpers
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-10 21:24:27 +00:00
#include <linux/i2c.h>
ASoC: Factor out 7 bit register 9 bit data SPI write This converts all the Wolfson drivers using this format (the only devices that do) except WM8753 to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-10 22:28:16 +00:00
#include <linux/spi/spi.h>
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 16:24:50 +00:00
#include <sound/soc.h>
ASoC: soc-cache: Add support for LZO register caching This patch adds support for LZO compression when storing the register cache. The initial register defaults cache is marked as __devinitconst and the only change required for a driver to use LZO compression is to set the compress_type member in codec->driver to SND_SOC_LZO_COMPRESSION. For a typical device whose register map would normally occupy 25kB or 50kB by using the LZO compression technique, one can get down to ~5-7kB. There might be a performance penalty associated with each individual read/write due to decompressing/compressing the underlying cache, however that should not be noticeable. These memory benefits depend on whether the target architecture can get rid of the memory occupied by the original register defaults cache which is marked as __devinitconst. Nevertheless there will be some memory gain even if the target architecture can't get rid of the original register map, this should be around ~30-32kB instead of 50kB. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:58 +00:00
#include <linux/bitmap.h>
ASoC: soc-cache: Add support for rbtree based register caching This patch adds support for rbtree compression when storing the register cache. It does this by not adding any uninitialized registers (those whose value is 0). If any of those registers is written with a nonzero value they get added into the rbtree. Consider a sample device with a large sparse register map. The register indices are between [0, 0x31ff]. An array of 12800 registers is thus created each of which is 2 bytes. This results in a 25kB region. This array normally lives outside soc-core, normally in the driver itself. The original soc-core code would kmemdup this region resulting in 50kB total memory. When using the rbtree compression technique and __devinitconst on the original array the figures are as follows. For this typical device, you might have 100 initialized registers, that is registers that are nonzero by default. We build an rbtree with 100 nodes, each of which is 24 bytes. This results in ~2kB of memory. Assuming that the target arch can freeup the memory used by the initial __devinitconst array, we end up using about ~2kB bytes of actual memory. The memory footprint will increase as uninitialized registers get written and thus new nodes created in the rbtree. In practice, most of those registers are never changed. If the target arch can't freeup the __devinitconst array, we end up using a total of ~27kB. The difference between the rbtree and the LZO caching techniques, is that if using the LZO technique the size of the cache will increase slower as more uninitialized registers get changed. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:59 +00:00
#include <linux/rbtree.h>
sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where needed These aren't modules, but they do make use of these macros, so they will need export.h to get that definition. Previously, they got it via the implicit module.h inclusion. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-22 13:34:58 +00:00
#include <linux/export.h>
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 16:24:50 +00:00
ASoC: soc-cache: Add trace event for snd_soc_cache_sync() This patch makes it easy to see when the syncing process begins and ends. You can also enable the snd_soc_reg_write tracepoint to see which registers are being synced. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21 15:29:02 +00:00
#include <trace/events/asoc.h>
ASoC: soc-cache: Clean up the cache manipulation code Use Takashi's clean up code to make the cache manipulation code more readable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11 11:29:49 +00:00
static bool snd_soc_set_cache_val(void *base, unsigned int idx,
unsigned int val, unsigned int word_size)
{
switch (word_size) {
case 1: {
u8 *cache = base;
if (cache[idx] == val)
return true;
cache[idx] = val;
break;
}
case 2: {
u16 *cache = base;
if (cache[idx] == val)
return true;
cache[idx] = val;
break;
}
default:
BUG();
}
return false;
}
static unsigned int snd_soc_get_cache_val(const void *base, unsigned int idx,
unsigned int word_size)
{
ASoC: Check for NULL register bank in snd_soc_get_cache_val() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06 10:26:15 +00:00
if (!base)
return -1;
ASoC: soc-cache: Clean up the cache manipulation code Use Takashi's clean up code to make the cache manipulation code more readable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11 11:29:49 +00:00
switch (word_size) {
case 1: {
const u8 *cache = base;
return cache[idx];
}
case 2: {
const u16 *cache = base;
return cache[idx];
}
default:
BUG();
}
/* unreachable */
return -1;
}
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec)
{
int i;
ASoC: soc-cache: Add error checking in the *_cache_sync functions Ensure that we report any errors encountered during reads/writes in the cache syncing functions. Remove redundant newline in the source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29 10:24:54 +00:00
int ret;
ASoC: Constify struct snd_soc_codec_driver Allow the CODEC driver structure to be marked const by making all the APIs that use it do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-02 16:21:08 +00:00
const struct snd_soc_codec_driver *codec_drv;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
unsigned int val;
codec_drv = codec->driver;
for (i = 0; i < codec_drv->reg_cache_size; ++i) {
ASoC: soc-cache: Add error checking in the *_cache_sync functions Ensure that we report any errors encountered during reads/writes in the cache syncing functions. Remove redundant newline in the source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29 10:24:54 +00:00
ret = snd_soc_cache_read(codec, i, &val);
if (ret)
return ret;
ASoC: soc-cache: Ensure flat compression uses a copy of the defaults cache With the addition of the cache fallback functionality, it is necessary to ensure that if the register defaults cache was marked as __devinitconst and the LZO compression is not compiled in the kernel, the fallback to flat compression will still use a copy of the defaults cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-12 10:22:28 +00:00
if (codec->reg_def_copy)
if (snd_soc_get_cache_val(codec->reg_def_copy,
ASoC: soc-cache: Clean up the cache manipulation code Use Takashi's clean up code to make the cache manipulation code more readable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11 11:29:49 +00:00
i, codec_drv->reg_word_size) == val)
continue;
ASoC: Fix register cache sync register_writable WARN_ONs Currently the condition for these WARN_ONs is reversed and they are placed before the actual check whether we are going to write to that register. So if the codec implements the register_writable callback we'll get a warning for each writable register when syncing the register cache. While we are at it change the check to use snd_soc_codec_writable_register instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-27 16:24:13 +00:00
WARN_ON(!snd_soc_codec_writable_register(codec, i));
ASoC: soc-cache: Add error checking in the *_cache_sync functions Ensure that we report any errors encountered during reads/writes in the cache syncing functions. Remove redundant newline in the source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29 10:24:54 +00:00
ret = snd_soc_write(codec, i, val);
if (ret)
return ret;
ASoC: cache: Standardise ASoC cache messages Currently ASoC has a mixture of message prefixes e.g. "ASoC", "asoc" or none and message types e.g. pr_debug or dev_dbg. Make sure all ASoC core messages use the same "ASoC" prefix and convert any component device specific messages to use dev_dbg instead of pr_debug. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 14:39:13 +00:00
dev_dbg(codec->dev, "ASoC: Synced register %#x, value = %#x\n",
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
i, val);
}
return 0;
}
static int snd_soc_flat_cache_write(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
{
ASoC: soc-cache: Clean up the cache manipulation code Use Takashi's clean up code to make the cache manipulation code more readable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11 11:29:49 +00:00
snd_soc_set_cache_val(codec->reg_cache, reg, value,
codec->driver->reg_word_size);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
return 0;
}
static int snd_soc_flat_cache_read(struct snd_soc_codec *codec,
unsigned int reg, unsigned int *value)
{
ASoC: soc-cache: Clean up the cache manipulation code Use Takashi's clean up code to make the cache manipulation code more readable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11 11:29:49 +00:00
*value = snd_soc_get_cache_val(codec->reg_cache, reg,
codec->driver->reg_word_size);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
return 0;
}
static int snd_soc_flat_cache_exit(struct snd_soc_codec *codec)
{
if (!codec->reg_cache)
return 0;
kfree(codec->reg_cache);
codec->reg_cache = NULL;
return 0;
}
static int snd_soc_flat_cache_init(struct snd_soc_codec *codec)
{
ASoC: soc-cache: Ensure flat compression uses a copy of the defaults cache With the addition of the cache fallback functionality, it is necessary to ensure that if the register defaults cache was marked as __devinitconst and the LZO compression is not compiled in the kernel, the fallback to flat compression will still use a copy of the defaults cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-12 10:22:28 +00:00
if (codec->reg_def_copy)
codec->reg_cache = kmemdup(codec->reg_def_copy,
ASoC: soc-cache: Add reg_size as a member to snd_soc_codec Simplify the use of reg_size, by calculating it once and storing it in the codec structure for later reference. The value of reg_size is reg_cache_size * reg_word_size. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-12 10:38:58 +00:00
codec->reg_size, GFP_KERNEL);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
else
ASoC: soc-cache: Add reg_size as a member to snd_soc_codec Simplify the use of reg_size, by calculating it once and storing it in the codec structure for later reference. The value of reg_size is reg_cache_size * reg_word_size. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-12 10:38:58 +00:00
codec->reg_cache = kzalloc(codec->reg_size, GFP_KERNEL);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
if (!codec->reg_cache)
return -ENOMEM;
return 0;
}
/* an array of all supported compression types */
static const struct snd_soc_cache_ops cache_types[] = {
ASoC: If we can't find a cache compression type default to flat This makes it easier to make cache types build time configurable as we don't have a hard dependency on a given cache being built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21 17:09:48 +00:00
/* Flat *must* be the first entry for fallback */
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
{
ASoC: soc-cache: Ensure consistent cache naming Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29 10:54:28 +00:00
.id = SND_SOC_FLAT_COMPRESSION,
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
.name = "flat",
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
.init = snd_soc_flat_cache_init,
.exit = snd_soc_flat_cache_exit,
.read = snd_soc_flat_cache_read,
.write = snd_soc_flat_cache_write,
.sync = snd_soc_flat_cache_sync
ASoC: soc-cache: Add support for LZO register caching This patch adds support for LZO compression when storing the register cache. The initial register defaults cache is marked as __devinitconst and the only change required for a driver to use LZO compression is to set the compress_type member in codec->driver to SND_SOC_LZO_COMPRESSION. For a typical device whose register map would normally occupy 25kB or 50kB by using the LZO compression technique, one can get down to ~5-7kB. There might be a performance penalty associated with each individual read/write due to decompressing/compressing the underlying cache, however that should not be noticeable. These memory benefits depend on whether the target architecture can get rid of the memory occupied by the original register defaults cache which is marked as __devinitconst. Nevertheless there will be some memory gain even if the target architecture can't get rid of the original register map, this should be around ~30-32kB instead of 50kB. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:58 +00:00
},
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
};
int snd_soc_cache_init(struct snd_soc_codec *codec)
{
int i;
for (i = 0; i < ARRAY_SIZE(cache_types); ++i)
ASoC: Add compress_type as a member to snd_soc_codec We need to keep a copy of the compress_type supplied by the codec driver so that we can override it if necessary with whatever the machine driver has provided us with. The reason for not modifying the codec->driver struct directly is that ideally we'd like to keep it const. Adjust the code in soc-cache and soc-core to make use of the compress_type member in the snd_soc_codec struct. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-02 14:53:01 +00:00
if (cache_types[i].id == codec->compress_type)
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
break;
ASoC: If we can't find a cache compression type default to flat This makes it easier to make cache types build time configurable as we don't have a hard dependency on a given cache being built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21 17:09:48 +00:00
/* Fall back to flat compression */
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
if (i == ARRAY_SIZE(cache_types)) {
ASoC: cache: Standardise ASoC cache messages Currently ASoC has a mixture of message prefixes e.g. "ASoC", "asoc" or none and message types e.g. pr_debug or dev_dbg. Make sure all ASoC core messages use the same "ASoC" prefix and convert any component device specific messages to use dev_dbg instead of pr_debug. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 14:39:13 +00:00
dev_warn(codec->dev, "ASoC: Could not match compress type: %d\n",
ASoC: If we can't find a cache compression type default to flat This makes it easier to make cache types build time configurable as we don't have a hard dependency on a given cache being built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-21 17:09:48 +00:00
codec->compress_type);
i = 0;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
mutex_init(&codec->cache_rw_mutex);
codec->cache_ops = &cache_types[i];
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
if (codec->cache_ops->init) {
if (codec->cache_ops->name)
ASoC: cache: Standardise ASoC cache messages Currently ASoC has a mixture of message prefixes e.g. "ASoC", "asoc" or none and message types e.g. pr_debug or dev_dbg. Make sure all ASoC core messages use the same "ASoC" prefix and convert any component device specific messages to use dev_dbg instead of pr_debug. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 14:39:13 +00:00
dev_dbg(codec->dev, "ASoC: Initializing %s cache for %s codec\n",
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
codec->cache_ops->name, codec->name);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
return codec->cache_ops->init(codec);
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
}
ASoC: soc-cache: Return -ENOSYS instead of -EINVAL These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22 10:48:49 +00:00
return -ENOSYS;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
/*
* NOTE: keep in mind that this function might be called
* multiple times.
*/
int snd_soc_cache_exit(struct snd_soc_codec *codec)
{
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
if (codec->cache_ops && codec->cache_ops->exit) {
if (codec->cache_ops->name)
ASoC: cache: Standardise ASoC cache messages Currently ASoC has a mixture of message prefixes e.g. "ASoC", "asoc" or none and message types e.g. pr_debug or dev_dbg. Make sure all ASoC core messages use the same "ASoC" prefix and convert any component device specific messages to use dev_dbg instead of pr_debug. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 14:39:13 +00:00
dev_dbg(codec->dev, "ASoC: Destroying %s cache for %s codec\n",
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
codec->cache_ops->name, codec->name);
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
return codec->cache_ops->exit(codec);
ASoC: soc-cache: Add optional cache name member to snd_soc_cache_ops Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06 09:51:57 +00:00
}
ASoC: soc-cache: Return -ENOSYS instead of -EINVAL These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22 10:48:49 +00:00
return -ENOSYS;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
/**
* snd_soc_cache_read: Fetch the value of a given register from the cache.
*
* @codec: CODEC to configure.
* @reg: The register index.
* @value: The value to be returned.
*/
int snd_soc_cache_read(struct snd_soc_codec *codec,
unsigned int reg, unsigned int *value)
{
int ret;
mutex_lock(&codec->cache_rw_mutex);
if (value && codec->cache_ops && codec->cache_ops->read) {
ret = codec->cache_ops->read(codec, reg, value);
mutex_unlock(&codec->cache_rw_mutex);
return ret;
}
mutex_unlock(&codec->cache_rw_mutex);
ASoC: soc-cache: Return -ENOSYS instead of -EINVAL These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22 10:48:49 +00:00
return -ENOSYS;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
EXPORT_SYMBOL_GPL(snd_soc_cache_read);
/**
* snd_soc_cache_write: Set the value of a given register in the cache.
*
* @codec: CODEC to configure.
* @reg: The register index.
* @value: The new register value.
*/
int snd_soc_cache_write(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
{
int ret;
mutex_lock(&codec->cache_rw_mutex);
if (codec->cache_ops && codec->cache_ops->write) {
ret = codec->cache_ops->write(codec, reg, value);
mutex_unlock(&codec->cache_rw_mutex);
return ret;
}
mutex_unlock(&codec->cache_rw_mutex);
ASoC: soc-cache: Return -ENOSYS instead of -EINVAL These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22 10:48:49 +00:00
return -ENOSYS;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
EXPORT_SYMBOL_GPL(snd_soc_cache_write);
/**
* snd_soc_cache_sync: Sync the register cache with the hardware.
*
* @codec: CODEC to configure.
*
* Any registers that should not be synced should be marked as
* volatile. In general drivers can choose not to use the provided
* syncing functionality if they so require.
*/
int snd_soc_cache_sync(struct snd_soc_codec *codec)
{
int ret;
ASoC: soc-cache: Add trace event for snd_soc_cache_sync() This patch makes it easy to see when the syncing process begins and ends. You can also enable the snd_soc_reg_write tracepoint to see which registers are being synced. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21 15:29:02 +00:00
const char *name;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
if (!codec->cache_sync) {
return 0;
}
ASoC: soc-cache: dereferencing before checking The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07 19:01:41 +00:00
if (!codec->cache_ops || !codec->cache_ops->sync)
ASoC: soc-cache: Return -ENOSYS instead of -EINVAL These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-22 10:48:49 +00:00
return -ENOSYS;
ASoC: soc-cache: dereferencing before checking The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07 19:01:41 +00:00
ASoC: soc-cache: Add trace event for snd_soc_cache_sync() This patch makes it easy to see when the syncing process begins and ends. You can also enable the snd_soc_reg_write tracepoint to see which registers are being synced. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21 15:29:02 +00:00
if (codec->cache_ops->name)
name = codec->cache_ops->name;
else
name = "unknown";
ASoC: soc-cache: dereferencing before checking The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07 19:01:41 +00:00
if (codec->cache_ops->name)
ASoC: cache: Standardise ASoC cache messages Currently ASoC has a mixture of message prefixes e.g. "ASoC", "asoc" or none and message types e.g. pr_debug or dev_dbg. Make sure all ASoC core messages use the same "ASoC" prefix and convert any component device specific messages to use dev_dbg instead of pr_debug. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 14:39:13 +00:00
dev_dbg(codec->dev, "ASoC: Syncing %s cache for %s codec\n",
ASoC: soc-cache: dereferencing before checking The patch c358e640a66 "ASoC: soc-cache: Add trace event for snd_soc_cache_sync()" introduced a dereference of "codec->cache_ops" before we had checked it for NULL. I pulled the check forward, and then pulled everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-07 19:01:41 +00:00
codec->cache_ops->name, codec->name);
trace_snd_soc_cache_sync(codec, name, "start");
ret = codec->cache_ops->sync(codec);
if (!ret)
codec->cache_sync = 0;
trace_snd_soc_cache_sync(codec, name, "end");
return ret;
ASoC: soc-cache: Add support for flat register caching This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11 10:04:57 +00:00
}
EXPORT_SYMBOL_GPL(snd_soc_cache_sync);
ASoC: soc-cache: Add support for default readable()/volatile() functions For common scenarios, device drivers can provide a table of all the registers that are at least either readable/writable/volatile. The idea is that if a register lookup fails, all of its read/write/vol members will be zero and will be treated as default. This also reduces the size of the register access array. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-13 12:20:36 +00:00
static int snd_soc_get_reg_access_index(struct snd_soc_codec *codec,
unsigned int reg)
{
const struct snd_soc_codec_driver *codec_drv;
unsigned int min, max, index;
codec_drv = codec->driver;
min = 0;
max = codec_drv->reg_access_size - 1;
do {
index = (min + max) / 2;
if (codec_drv->reg_access_default[index].reg == reg)
return index;
if (codec_drv->reg_access_default[index].reg < reg)
min = index + 1;
else
max = index;
} while (min <= max);
return -1;
}
int snd_soc_default_volatile_register(struct snd_soc_codec *codec,
unsigned int reg)
{
int index;
if (reg >= codec->driver->reg_cache_size)
return 1;
index = snd_soc_get_reg_access_index(codec, reg);
if (index < 0)
return 0;
return codec->driver->reg_access_default[index].vol;
}
EXPORT_SYMBOL_GPL(snd_soc_default_volatile_register);
int snd_soc_default_readable_register(struct snd_soc_codec *codec,
unsigned int reg)
{
int index;
if (reg >= codec->driver->reg_cache_size)
return 1;
index = snd_soc_get_reg_access_index(codec, reg);
if (index < 0)
return 0;
return codec->driver->reg_access_default[index].read;
}
EXPORT_SYMBOL_GPL(snd_soc_default_readable_register);
ASoC: Add default snd_soc_default_writable_register() callback By using struct snd_soc_reg_access for the read/write/vol attributes of the registers, we provide callbacks that automatically determine whether a given register is readable/writable or volatile. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-24 13:45:17 +00:00
int snd_soc_default_writable_register(struct snd_soc_codec *codec,
unsigned int reg)
{
int index;
if (reg >= codec->driver->reg_cache_size)
return 1;
index = snd_soc_get_reg_access_index(codec, reg);
if (index < 0)
return 0;
return codec->driver->reg_access_default[index].write;
}
EXPORT_SYMBOL_GPL(snd_soc_default_writable_register);