dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/kernel/sysctl.c

2884 lines
68 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* sysctl.c: General linux system control interface
*
* Begun 24 March 1995, Stephen Tweedie
* Added /proc support, Dec 1995
* Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas.
* Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver.
* Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver.
* Dynamic registration fixes, Stephen Tweedie.
* Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn.
* Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris
* Horn.
* Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer.
* Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer.
* Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill
* Wendling.
* The list_for_each() macro wasn't appropriate for the sysctl loop.
* Removed it and replaced it with older style, 03/23/00, Bill Wendling
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
V3 file capabilities: alter behavior of cap_setpcap The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1, can change the capabilities of another process, p2. This is not the meaning that was intended for this capability at all, and this implementation came about purely because, without filesystem capabilities, there was no way to use capabilities without one process bestowing them on another. Since we now have a filesystem support for capabilities we can fix the implementation of CAP_SETPCAP. The most significant thing about this change is that, with it in effect, no process can set the capabilities of another process. The capabilities of a program are set via the capability convolution rules: pI(post-exec) = pI(pre-exec) pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI) pE(post-exec) = fE ? pP(post-exec) : 0 at exec() time. As such, the only influence the pre-exec() program can have on the post-exec() program's capabilities are through the pI capability set. The correct implementation for CAP_SETPCAP (and that enabled by this patch) is that it can be used to add extra pI capabilities to the current process - to be picked up by subsequent exec()s when the above convolution rules are applied. Here is how it works: Let's say we have a process, p. It has capability sets, pE, pP and pI. Generally, p, can change the value of its own pI to pI' where (pI' & ~pI) & ~pP = 0. That is, the only new things in pI' that were not present in pI need to be present in pP. The role of CAP_SETPCAP is basically to permit changes to pI beyond the above: if (pE & CAP_SETPCAP) { pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0 */ } This capability is useful for things like login, which (say, via pam_cap) might want to raise certain inheritable capabilities for use by the children of the logged-in user's shell, but those capabilities are not useful to or needed by the login program itself. One such use might be to limit who can run ping. You set the capabilities of the 'ping' program to be "= cap_net_raw+i", and then only shells that have (pI & CAP_NET_RAW) will be able to run it. Without CAP_SETPCAP implemented as described above, login(pam_cap) would have to also have (pP & CAP_NET_RAW) in order to raise this capability and pass it on through the inheritable set. Signed-off-by: Andrew Morgan <morgan@kernel.org> Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:59 +00:00
#include <linux/security.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/ctype.h>
#include <linux/utsname.h>
#include <linux/smp_lock.h>
proper prototype for proc_nr_files() Add a proper prototype for proc_nr_files() in include/linux/fs.h Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 11:03:45 +00:00
#include <linux/fs.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/init.h>
#include <linux/kernel.h>
[PATCH] remove CONFIG_KOBJECT_UEVENT option It makes zero sense to have hotplug, but not the netlink events enabled today. Remove this option and merge the kobject_uevent.h header into the kobject.h header file. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11 04:33:52 +00:00
#include <linux/kobject.h>
[NET]: Fix sparse warnings Of this type, mostly: CHECK net/ipv6/netfilter.c net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static? net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static? Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-16 05:18:02 +00:00
#include <linux/net.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/sysrq.h>
#include <linux/highuid.h>
#include <linux/writeback.h>
#include <linux/hugetlb.h>
#include <linux/initrd.h>
keys: make the keyring quotas controllable through /proc/sys Make the keyring quotas controllable through /proc/sys files: (*) /proc/sys/kernel/keys/root_maxkeys /proc/sys/kernel/keys/root_maxbytes Maximum number of keys that root may have and the maximum total number of bytes of data that root may have stored in those keys. (*) /proc/sys/kernel/keys/maxkeys /proc/sys/kernel/keys/maxbytes Maximum number of keys that each non-root user may have and the maximum total number of bytes of data that each of those users may have stored in their keys. Also increase the quotas as a number of people have been complaining that it's not big enough. I'm not sure that it's big enough now either, but on the other hand, it can now be set in /etc/sysctl.conf. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <kwc@citi.umich.edu> Cc: <arunsr@cse.iitk.ac.in> Cc: <dwalsh@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:01:32 +00:00
#include <linux/key.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
#include <linux/syscalls.h>
[PATCH] suspend-to-ram: allow video options to be set at runtime Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:27:58 +00:00
#include <linux/nfs_fs.h>
#include <linux/acpi.h>
Add common orderly_poweroff() Various pieces of code around the kernel want to be able to trigger an orderly poweroff. This pulls them together into a single implementation. By default the poweroff command is /sbin/poweroff, but it can be set via sysctl: kernel/poweroff_cmd. This is split at whitespace, so it can include command-line arguments. This patch replaces four other instances of invoking either "poweroff" or "shutdown -h now": two sbus drivers, and acpi thermal management. sparc64 has its own "powerd"; still need to determine whether it should be replaced by orderly_poweroff(). Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David S. Miller <davem@davemloft.net>
2007-07-18 01:37:02 +00:00
#include <linux/reboot.h>
ftrace: add ftrace_enabled sysctl to disable mcount function This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
#include <linux/ftrace.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/uaccess.h>
#include <asm/processor.h>
[PATCH] x86: Clean up x86 NMI sysctls Use prototypes in headers Don't define panic_on_unrecovered_nmi for all architectures Cc: dzickus@redhat.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-29 23:47:55 +00:00
#ifdef CONFIG_X86
#include <asm/nmi.h>
[PATCH] x86: add sysctl for kstack_depth_to_print Add sysctl for kstack_depth_to_print. This lets users change the amount of raw stack data printed in dump_stack() without having to reboot. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:11 +00:00
#include <asm/stacktrace.h>
x86: various changes and cleanups to in_p/out_p delay details various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "David P. Reed" <dpreed@reed.com>
2008-01-30 12:30:05 +00:00
#include <asm/io.h>
[PATCH] x86: Clean up x86 NMI sysctls Use prototypes in headers Don't define panic_on_unrecovered_nmi for all architectures Cc: dzickus@redhat.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-29 23:47:55 +00:00
#endif
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
static int deprecated_sysctl_warning(struct __sysctl_args *args);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
extern int C_A_D;
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
extern int print_fatal_signals;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
[PATCH] support for panic at OOM This patch adds panic_on_oom sysctl under sys.vm. When sysctl vm.panic_on_oom = 1, the kernel panics intead of killing rogue processes. And if vm.panic_on_oom is 0 the kernel will do oom_kill() in the same way as it does today. Of course, the default value is 0 and only root can modifies it. In general, oom_killer works well and kill rogue processes. So the whole system can survive. But there are environments where panic is preferable rather than kill some processes. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:13 +00:00
extern int sysctl_panic_on_oom;
oom: add oom_kill_allocating_task sysctl Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill the OOM-triggering task instead of scanning through the tasklist to find a memory-hogging target. This is helpful for systems with an insanely large number of tasks where scanning the tasklist significantly degrades performance. Cc: Andrea Arcangeli <andrea@suse.de> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:25:56 +00:00
extern int sysctl_oom_kill_allocating_task;
oom: add sysctl to enable task memory dump Adds a new sysctl, 'oom_dump_tasks', that enables the kernel to produce a dump of all system tasks (excluding kernel threads) when performing an OOM-killing. Information includes pid, uid, tgid, vm size, rss, cpu, oom_adj score, and name. This is helpful for determining why there was an OOM condition and which rogue task caused it. It is configurable so that large systems, such as those with several thousand tasks, do not incur a performance penalty associated with dumping data they may not desire. If an OOM was triggered as a result of a memory controller, the tasklist shall be filtered to exclude tasks that are not a member of the same cgroup. Cc: Andrea Arcangeli <andrea@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:14:07 +00:00
extern int sysctl_oom_dump_tasks;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern int max_threads;
extern int core_uses_pid;
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:43 +00:00
extern int suid_dumpable;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern char core_pattern[];
extern int pid_max;
extern int min_free_kbytes;
extern int pid_max_min, pid_max_max;
[PATCH] drop-pagecache Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to discard as much pagecache and/or reclaimable slab objects as it can. THis operation requires root permissions. It won't drop dirty data, so the user should run `sync' first. Caveats: a) Holds inode_lock for exorbitant amounts of time. b) Needs to be taught about NUMA nodes: propagate these all the way through so the discarding can be controlled on a per-node basis. This is a debugging feature: useful for getting consistent results between filesystem benchmarks. We could possibly put it under a config option, but it's less than 300 bytes. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:00:39 +00:00
extern int sysctl_drop_caches;
[PATCH] Make high and batch sizes of per_cpu_pagelists configurable As recently there has been lot of traffic on the right values for batch and high water marks for per_cpu_pagelists. This patch makes these two variables configurable through /proc interface. A new tunable /proc/sys/vm/percpu_pagelist_fraction is added. This entry controls the fraction of pages at most in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:00:40 +00:00
extern int percpu_pagelist_fraction;
[PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings Sometimes e.g. with crashme the compat layer warnings can be noisy. Add a way to turn them off by gating all output through compat_printk that checks a global sysctl. The default is not changed. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:52 +00:00
extern int compat_log;
proc: maps protection The /proc/pid/ "maps", "smaps", and "numa_maps" files contain sensitive information about the memory location and usage of processes. Issues: - maps should not be world-readable, especially if programs expect any kind of ASLR protection from local attackers. - maps cannot just be 0400 because "-D_FORTIFY_SOURCE=2 -O2" makes glibc check the maps when %n is in a *printf call, and a setuid(getuid()) process wouldn't be able to read its own maps file. (For reference see http://lkml.org/lkml/2006/1/22/150) - a system-wide toggle is needed to allow prior behavior in the case of non-root applications that depend on access to the maps contents. This change implements a check using "ptrace_may_attach" before allowing access to read the maps contents. To control this protection, the new knob /proc/sys/kernel/maps_protect has been added, with corresponding updates to the procfs documentation. [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: New sysctl numbers are old hat] Signed-off-by: Kees Cook <kees@outflux.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:26:04 +00:00
extern int maps_protect;
Make vm statistics update interval configurable Make it configurable. Code in mm makes the vm statistics intervals independent from the cache reaper use that opportunity to make it configurable. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 09:35:13 +00:00
extern int sysctl_stat_interval;
sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
extern int latencytop_enabled;
[PATCH] avoid multiplication overflows and signedness issues for max_fds Limit sysctl_nr_open - we don't want ->max_fds to exceed MAX_INT and we don't want size calculation for ->fd[] to overflow. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-10 14:08:32 +00:00
extern int sysctl_nr_open_min, sysctl_nr_open_max;
rcu: make rcutorture more vicious: reinstate boot-time testing This patch re-institutes the ability to build rcutorture directly into the Linux kernel. The reason that this capability was removed was that this could result in your kernel being pretty much useless, as rcutorture would be running starting from early boot. This problem has been avoided by (1) making rcutorture run only three seconds of every six by default, (2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture to be quiesced at boot time, and (3) adding a sysctl in /proc named /proc/sys/kernel/rcutorture_runnable that permits rcutorture to be quiesced and unquiesced when built into the kernel. Please note that this /proc file is -not- available when rcutorture is built as a module. Please also note that to get the earlier take-no-prisoners behavior, you must use the boot command line to set rcutorture's "stutter" parameter to zero. The rcutorture quiescing mechanism is currently quite crude: loops in each rcutorture process that poll a global variable once per tick. Suggestions for improvement are welcome. The default action will be to reduce the polling rate to a few times per second. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-18 16:26:49 +00:00
#ifdef CONFIG_RCU_TORTURE_TEST
extern int rcutorture_runnable;
#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
/* Constants used for minimum and maximum */
softlockup: fix softlockup_thresh fix Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:14 +00:00
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_DETECT_SOFTLOCKUP)
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
static int one = 1;
mm/page-writeback: highmem_is_dirtyable option Add vm.highmem_is_dirtyable toggle A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of approximately 2Gb size which contains a hash format that is written randomly by the dbclean process. On 2.6.16 this process took a few minutes. With lowmem only accounting of dirty ratios, this takes about 12 hours of 100% disk IO, all random writes. Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to add the highmem back to the total available memory count. [akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build] Signed-off-by: Bron Gondwana <brong@fastmail.fm> Cc: Ethan Solomita <solo@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:29:20 +00:00
#endif
#ifdef CONFIG_DETECT_SOFTLOCKUP
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
static int sixty = 60;
softlockup: fix softlockup_thresh unaligned access and disable detection at runtime Fix unaligned access errors when setting softlockup_thresh on 64 bit platforms. Allow softlockup detection to be disabled by setting softlockup_thresh <= 0. Detect that boot time softlockup detection has been disabled earlier in softlockup_tick. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:14 +00:00
static int neg_one = -1;
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
#endif
#ifdef CONFIG_MMU
static int two = 2;
#endif
static int zero;
static int one_hundred = 100;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
static int minolduid;
[PATCH] Make high and batch sizes of per_cpu_pagelists configurable As recently there has been lot of traffic on the right values for batch and high water marks for per_cpu_pagelists. This patch makes these two variables configurable through /proc interface. A new tunable /proc/sys/vm/percpu_pagelist_fraction is added. This entry controls the fraction of pages at most in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:00:40 +00:00
static int min_percpu_pagelist_fract = 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int ngroups_max = NGROUPS_MAX;
remove CONFIG_KMOD from core kernel code Always compile request_module when the kernel allows modules. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-08 17:00:17 +00:00
#ifdef CONFIG_MODULES
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern char modprobe_path[];
#endif
#ifdef CONFIG_CHR_DEV_SG
extern int sg_big_buff;
#endif
#ifdef __sparc__
extern char reboot_command [];
extern int stop_a_enabled;
extern int scons_pwroff;
#endif
#ifdef __hppa__
extern int pwrsw_enabled;
extern int unaligned_enabled;
#endif
[PATCH] s390: cleanup Kconfig Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:19:28 +00:00
#ifdef CONFIG_S390
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_MATHEMU
extern int sysctl_ieee_emulation_warnings;
#endif
extern int sysctl_userprocess_debug;
[PATCH] s390: spin lock retry Split spin lock and r/w lock implementation into a single try which is done inline and an out of line function that repeatedly tries to get the lock before doing the cpu_relax(). Add a system control to set the number of retries before a cpu is yielded. The reason for the spin lock retry is that the diagnose 0x44 that is used to give up the virtual cpu is quite expensive. For spin locks that are held only for a short period of time the costs of the diagnoses outweights the savings for spin locks that are held for a longer timer. The default retry count is 1000. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 18:44:57 +00:00
extern int spin_retry;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#ifdef CONFIG_BSD_PROCESS_ACCT
extern int acct_parm[];
#endif
[IA64] sysctl option to silence unaligned trap warnings Allow sysadmin to disable all warnings about userland apps making unaligned accesses by using: # echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap Rather than having to use prctl on a process by process basis. Default behaivour leaves the warnings enabled. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-28 17:42:23 +00:00
#ifdef CONFIG_IA64
extern int no_unaligned_warning;
#endif
[PATCH] pi-futex: rt mutex core Core functions for the rt-mutex subsystem. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 09:54:53 +00:00
#ifdef CONFIG_RT_MUTEXES
extern int max_lock_depth;
#endif
[PATCH] cad_pid sysctl with PROC_FS=n If CONFIG_PROC_FS=n: kernel/sysctl.c:148: warning: 'proc_do_cad_pid' used but never defined kernel/built-in.o:(.data+0x1228): undefined reference to `proc_do_cad_pid' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 06:28:34 +00:00
#ifdef CONFIG_PROC_SYSCTL
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos);
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *filp,
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos);
[PATCH] cad_pid sysctl with PROC_FS=n If CONFIG_PROC_FS=n: kernel/sysctl.c:148: warning: 'proc_do_cad_pid' used but never defined kernel/built-in.o:(.data+0x1228): undefined reference to `proc_do_cad_pid' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 06:28:34 +00:00
#endif
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table root_table[];
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
static struct ctl_table_root sysctl_table_root;
static struct ctl_table_header root_table_header = {
.ctl_table = root_table,
.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.header_list),
.root = &sysctl_table_root,
};
static struct ctl_table_root sysctl_table_root = {
.root_list = LIST_HEAD_INIT(sysctl_table_root.root_list),
.header_list = LIST_HEAD_INIT(root_table_header.ctl_entry),
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table kern_table[];
static struct ctl_table vm_table[];
static struct ctl_table fs_table[];
static struct ctl_table debug_table[];
static struct ctl_table dev_table[];
extern struct ctl_table random_table[];
[PATCH] inotify (1/5): split kernel API from userspace support The following series of patches introduces a kernel API for inotify, making it possible for kernel modules to benefit from inotify's mechanism for watching inodes. With these patches, inotify will maintain for each caller a list of watches (via an embedded struct inotify_watch), where each inotify_watch is associated with a corresponding struct inode. The caller registers an event handler and specifies for which filesystem events their event handler should be called per inotify_watch. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Acked-by: Robert Love <rml@novell.com> Acked-by: John McCutchan <john@johnmccutchan.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-01 20:10:59 +00:00
#ifdef CONFIG_INOTIFY_USER
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
extern struct ctl_table inotify_table[];
[PATCH] inotify: move sysctl This moves the inotify sysctl knobs to "/proc/sys/fs/inotify" from "/proc/sys/fs". Also some related cleanup. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 16:38:18 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
#endif
lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:48:56 +00:00
extern int prove_locking;
extern int lock_stat;
[PATCH] sysctl: simplify ipc ns specific sysctls Refactor the ipc sysctl support so that it is simpler, more readable, and prepares for fixing the bug with the wrong values being returned in the sys_sysctl interface. The function proc_do_ipc_string() was misnamed as it never handled strings. It's magic of when to work with strings and when to work with longs belonged in the sysctl table. I couldn't tell if the code would work if you disabled the ipc namespace but it certainly looked like it would have problems. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:39:56 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The default sysctl tables: */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table root_table[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = CTL_KERN,
.procname = "kernel",
.mode = 0555,
.child = kern_table,
},
{
.ctl_name = CTL_VM,
.procname = "vm",
.mode = 0555,
.child = vm_table,
},
{
.ctl_name = CTL_FS,
.procname = "fs",
.mode = 0555,
.child = fs_table,
},
{
.ctl_name = CTL_DEBUG,
.procname = "debug",
.mode = 0555,
.child = debug_table,
},
{
.ctl_name = CTL_DEV,
.procname = "dev",
.mode = 0555,
.child = dev_table,
},
sysctl.c: add text telling people to use CTL_UNNUMBERED Hopefully this will help people to understand the new regime. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:41:21 +00:00
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
};
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
#ifdef CONFIG_SCHED_DEBUG
sched: sysctl, proc_dointvec_minmax() expects int values for min_sched_granularity_ns, max_sched_granularity_ns, min_wakeup_granularity_ns and max_wakeup_granularity_ns are declared "unsigned long". This is incorrect since proc_dointvec_minmax() expects plain "int" guard values. This bug only triggers on big endian 64 bit arches. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 14:21:13 +00:00
static int min_sched_granularity_ns = 100000; /* 100 usecs */
static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
static int min_wakeup_granularity_ns; /* 0 usecs */
static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
#endif
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table kern_table[] = {
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
#ifdef CONFIG_SCHED_DEBUG
{
.ctl_name = CTL_UNNUMBERED,
sched: reintroduce the sched_min_granularity tunable we lost the sched_min_granularity tunable to a clever optimization that uses the sched_latency/min_granularity ratio - but the ratio is quite unintuitive to users and can also crash the kernel if the ratio is set to 0. So reintroduce the min_granularity tunable, while keeping the ratio maintained internally. no functionality changed. [ mingo@elte.hu: some fixlets. ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 21:39:37 +00:00
.procname = "sched_min_granularity_ns",
.data = &sysctl_sched_min_granularity,
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
.maxlen = sizeof(unsigned int),
.mode = 0644,
sched: reintroduce the sched_min_granularity tunable we lost the sched_min_granularity tunable to a clever optimization that uses the sched_latency/min_granularity ratio - but the ratio is quite unintuitive to users and can also crash the kernel if the ratio is set to 0. So reintroduce the min_granularity tunable, while keeping the ratio maintained internally. no functionality changed. [ mingo@elte.hu: some fixlets. ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 21:39:37 +00:00
.proc_handler = &sched_nr_latency_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns,
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
},
sched: adaptive scheduler granularity Instead of specifying the preemption granularity, specify the wanted latency. By fixing the granlarity to a constany the wakeup latency it a function of the number of running tasks on the rq. Invert this relation. sysctl_sched_granularity becomes a minimum for the dynamic granularity computed from the new sysctl_sched_latency. Then use this latency to do more intelligent granularity decisions: if there are fewer tasks running then we can schedule coarser. This helps performance while still always keeping the latency target. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 16:41:53 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_latency_ns",
.data = &sysctl_sched_latency,
.maxlen = sizeof(unsigned int),
.mode = 0644,
sched: reintroduce the sched_min_granularity tunable we lost the sched_min_granularity tunable to a clever optimization that uses the sched_latency/min_granularity ratio - but the ratio is quite unintuitive to users and can also crash the kernel if the ratio is set to 0. So reintroduce the min_granularity tunable, while keeping the ratio maintained internally. no functionality changed. [ mingo@elte.hu: some fixlets. ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 21:39:37 +00:00
.proc_handler = &sched_nr_latency_handler,
sched: adaptive scheduler granularity Instead of specifying the preemption granularity, specify the wanted latency. By fixing the granlarity to a constany the wakeup latency it a function of the number of running tasks on the rq. Invert this relation. sysctl_sched_granularity becomes a minimum for the dynamic granularity computed from the new sysctl_sched_latency. Then use this latency to do more intelligent granularity decisions: if there are fewer tasks running then we can schedule coarser. This helps performance while still always keeping the latency target. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 16:41:53 +00:00
.strategy = &sysctl_intvec,
.extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns,
},
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_wakeup_granularity_ns",
.data = &sysctl_sched_wakeup_granularity,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &min_wakeup_granularity_ns,
.extra2 = &max_wakeup_granularity_ns,
},
sched: update shares on wakeup We found that the affine wakeup code needs rather accurate load figures to be effective. The trouble is that updating the load figures is fairly expensive with group scheduling. Therefore ratelimit the updating. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 11:41:35 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_shares_ratelimit",
.data = &sysctl_sched_shares_ratelimit,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_child_runs_first",
.data = &sysctl_sched_child_runs_first,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctls Make the lockdep sysctls not depend on CONFIG_SCHED_DEBUG. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 16:41:52 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_features",
.data = &sysctl_sched_features,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: reintroduce cache-hot affinity reintroduce a simplified version of cache-hot/cold scheduling affinity. This improves performance with certain SMP workloads, such as sysbench. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 15:00:18 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_migration_cost",
.data = &sysctl_sched_migration_cost,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: avoid large irq-latencies in smp-balancing SMP balancing is done with IRQs disabled and can iterate the full rq. When rqs are large this can cause large irq-latencies. Limit the nr of iterations on each run. This fixes a scheduling latency regression reported by the -rt folks. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 21:39:39 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_nr_migrate",
.data = &sysctl_sched_nr_migrate,
.maxlen = sizeof(unsigned int),
sched: rt time limit Very simple time limit on the realtime scheduling classes. Allow the rq's realtime class to consume sched_rt_ratio of every sched_rt_period slice. If the class exceeds this quota the fair class will preempt the realtime class. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:29 +00:00
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctls Make the lockdep sysctls not depend on CONFIG_SCHED_DEBUG. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 16:41:52 +00:00
#endif
sched: rt-group: interface Change the rt_ratio interface to rt_runtime_us, to match rt_period_us. This avoids picking a granularity for the ratio. Extend the /sys/kernel/uids/<uid>/ interface to allow setting the group's rt_runtime. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 14:45:39 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_rt_period_us",
.data = &sysctl_sched_rt_period,
.maxlen = sizeof(unsigned int),
.mode = 0644,
sched: rt-group: synchonised bandwidth period Various SMP balancing algorithms require that the bandwidth period run in sync. Possible improvements are moving the rt_bandwidth thing into root_domain and keeping a span per rt_bandwidth which marks throttled cpus. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 17:44:57 +00:00
.proc_handler = &sched_rt_handler,
sched: rt-group: interface Change the rt_ratio interface to rt_runtime_us, to match rt_period_us. This avoids picking a granularity for the ratio. Extend the /sys/kernel/uids/<uid>/ interface to allow setting the group's rt_runtime. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 14:45:39 +00:00
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_rt_runtime_us",
.data = &sysctl_sched_rt_runtime,
.maxlen = sizeof(int),
.mode = 0644,
sched: rt-group: synchonised bandwidth period Various SMP balancing algorithms require that the bandwidth period run in sync. Possible improvements are moving the rt_bandwidth thing into root_domain and keeping a span per rt_bandwidth which marks throttled cpus. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 17:44:57 +00:00
.proc_handler = &sched_rt_handler,
sched: rt-group: interface Change the rt_ratio interface to rt_runtime_us, to match rt_period_us. This avoids picking a granularity for the ratio. Extend the /sys/kernel/uids/<uid>/ interface to allow setting the group's rt_runtime. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 14:45:39 +00:00
},
sched: add /proc/sys/kernel/sched_compat_yield add /proc/sys/kernel/sched_compat_yield to make sys_sched_yield() more agressive, by moving the yielding task to the last position in the rbtree. with sched_compat_yield=0: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2539 mingo 20 0 1576 252 204 R 50 0.0 0:02.03 loop_yield 2541 mingo 20 0 1576 244 196 R 50 0.0 0:02.05 loop with sched_compat_yield=1: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2584 mingo 20 0 1576 248 196 R 99 0.0 0:52.45 loop 2582 mingo 20 0 1576 256 204 R 0 0.0 0:00.00 loop_yield Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-09-19 21:34:46 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_compat_yield",
.data = &sysctl_sched_compat_yield,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:48:56 +00:00
#ifdef CONFIG_PROVE_LOCKING
{
.ctl_name = CTL_UNNUMBERED,
.procname = "prove_locking",
.data = &prove_locking,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_LOCK_STAT
{
.ctl_name = CTL_UNNUMBERED,
.procname = "lock_stat",
.data = &lock_stat,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
sched: add CFS debug sysctls add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled. This allows for faster debugging of scheduler problems. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 16:52:00 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_PANIC,
.procname = "panic",
.data = &panic_timeout,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_USES_PID,
.procname = "core_uses_pid",
.data = &core_uses_pid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_PATTERN,
.procname = "core_pattern",
.data = core_pattern,
make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core filename size Make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core filename size and change it to 128, so that extensive patterns such as '/local/cores/%e-%h-%s-%t-%p.core' won't result in truncated filename generation. Signed-off-by: Dan Aloni <da-x@monatomic.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:11:16 +00:00
.maxlen = CORENAME_MAX_SIZE,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
#ifdef CONFIG_PROC_SYSCTL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.procname = "tainted",
.data = &tainted,
.maxlen = sizeof(int),
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
.mode = 0644,
.proc_handler = &proc_dointvec_taint,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
#endif
sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
#ifdef CONFIG_LATENCYTOP
{
.procname = "latencytop",
.data = &latencytop_enabled,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_BLK_DEV_INITRD
{
.ctl_name = KERN_REALROOTDEV,
.procname = "real-root-dev",
.data = &real_root_dev,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "print-fatal-signals",
.data = &print_fatal_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __sparc__
{
.ctl_name = KERN_SPARC_REBOOT,
.procname = "reboot-cmd",
.data = reboot_command,
.maxlen = 256,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
{
.ctl_name = KERN_SPARC_STOP_A,
.procname = "stop-a",
.data = &stop_a_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_SPARC_SCONS_PWROFF,
.procname = "scons-poweroff",
.data = &scons_pwroff,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef __hppa__
{
.ctl_name = KERN_HPPA_PWRSW,
.procname = "soft-power",
.data = &pwrsw_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_HPPA_UNALIGNED,
.procname = "unaligned-trap",
.data = &unaligned_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_CTLALTDEL,
.procname = "ctrl-alt-del",
.data = &C_A_D,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
ftrace: add ftrace_enabled sysctl to disable mcount function This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
#ifdef CONFIG_FTRACE
{
.ctl_name = CTL_UNNUMBERED,
.procname = "ftrace_enabled",
.data = &ftrace_enabled,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &ftrace_enable_sysctl,
},
#endif
remove CONFIG_KMOD from core kernel code Always compile request_module when the kernel allows modules. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-08 17:00:17 +00:00
#ifdef CONFIG_MODULES
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_MODPROBE,
.procname = "modprobe",
.data = &modprobe_path,
.maxlen = KMOD_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
[PATCH] CONFIG_NET=n build fix Cc: Greg KH <greg@kroah.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:05:47 +00:00
#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_HOTPLUG,
.procname = "hotplug",
[PATCH] driver core: replace "hotplug" by "uevent" Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-16 08:00:00 +00:00
.data = &uevent_helper,
.maxlen = UEVENT_HELPER_PATH_LEN,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
#ifdef CONFIG_CHR_DEV_SG
{
.ctl_name = KERN_SG_BIG_BUFF,
.procname = "sg-big-buff",
.data = &sg_big_buff,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_BSD_PROCESS_ACCT
{
.ctl_name = KERN_ACCT,
.procname = "acct",
.data = &acct_parm,
.maxlen = 3*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MAGIC_SYSRQ
{
.ctl_name = KERN_SYSRQ,
.procname = "sysrq",
[PATCH] debug: add sysrq_always_enabled boot option Most distributions enable sysrq support but set it to 0 by default. Add a sysrq_always_enabled boot option to always-enable sysrq keys. Useful for debugging - without having to modify the disribution's config files (which might not be possible if the kernel is on a live CD, etc.). Also, while at it, clean up the sysrq interfaces. [bunk@stusta.de: make sysrq_always_enabled_setup() static] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 08:34:36 +00:00
.data = &__sysrq_enabled,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
[PATCH] cad_pid sysctl with PROC_FS=n If CONFIG_PROC_FS=n: kernel/sysctl.c:148: warning: 'proc_do_cad_pid' used but never defined kernel/built-in.o:(.data+0x1228): undefined reference to `proc_do_cad_pid' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 06:28:34 +00:00
#ifdef CONFIG_PROC_SYSCTL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.procname = "cad_pid",
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
.data = NULL,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.maxlen = sizeof (int),
.mode = 0600,
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
.proc_handler = &proc_do_cad_pid,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
[PATCH] cad_pid sysctl with PROC_FS=n If CONFIG_PROC_FS=n: kernel/sysctl.c:148: warning: 'proc_do_cad_pid' used but never defined kernel/built-in.o:(.data+0x1228): undefined reference to `proc_do_cad_pid' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 06:28:34 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_MAX_THREADS,
.procname = "threads-max",
.data = &max_threads,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_RANDOM,
.procname = "random",
.mode = 0555,
.child = random_table,
},
{
.ctl_name = KERN_OVERFLOWUID,
.procname = "overflowuid",
.data = &overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = KERN_OVERFLOWGID,
.procname = "overflowgid",
.data = &overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
[PATCH] s390: cleanup Kconfig Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:19:28 +00:00
#ifdef CONFIG_S390
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_MATHEMU
{
.ctl_name = KERN_IEEE_EMULATION_WARNINGS,
.procname = "ieee_emulation_warnings",
.data = &sysctl_ieee_emulation_warnings,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_S390_USER_DEBUG_LOGGING,
.procname = "userprocess_debug",
.data = &sysctl_userprocess_debug,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_PIDMAX,
.procname = "pid_max",
.data = &pid_max,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = sysctl_intvec,
.extra1 = &pid_max_min,
.extra2 = &pid_max_max,
},
{
.ctl_name = KERN_PANIC_ON_OOPS,
.procname = "panic_on_oops",
.data = &panic_on_oops,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
printk_ratelimit() functions should use CONFIG_PRINTK Makes an embedded image a bit smaller. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:25 +00:00
#if defined CONFIG_PRINTK
{
.ctl_name = KERN_PRINTK,
.procname = "printk",
.data = &console_loglevel,
.maxlen = 4*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_PRINTK_RATELIMIT,
.procname = "printk_ratelimit",
.data = &printk_ratelimit_jiffies,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
{
.ctl_name = KERN_PRINTK_RATELIMIT_BURST,
.procname = "printk_ratelimit_burst",
.data = &printk_ratelimit_burst,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
printk_ratelimit() functions should use CONFIG_PRINTK Makes an embedded image a bit smaller. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:25 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_NGROUPS_MAX,
.procname = "ngroups_max",
.data = &ngroups_max,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
.ctl_name = KERN_UNKNOWN_NMI_PANIC,
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,
.maxlen = sizeof (int),
.mode = 0644,
[PATCH] i386/x86-64: Remove un/set_nmi_callback and reserve/release_lapic_nmi functions Removes the un/set_nmi_callback and reserve/release_lapic_nmi functions as they are no longer needed. The various subsystems are modified to register with the die_notifier instead. Also includes compile fixes by Andrew Morton. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:27 +00:00
.proc_handler = &proc_dointvec,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
[PATCH] x86: Add abilty to enable/disable nmi watchdog with sysctl Adds a new /proc/sys/kernel/nmi call that will enable/disable the nmi watchdog. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:27 +00:00
{
.procname = "nmi_watchdog",
.data = &nmi_watchdog_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_nmi_enabled,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
#endif
#if defined(CONFIG_X86)
[PATCH] x86: Allow users to force a panic on NMI To quote Alan Cox: The default Linux behaviour on an NMI of either memory or unknown is to continue operation. For many environments such as scientific computing it is preferable that the box is taken out and the error dealt with than an uncorrected parity/ECC error get propogated. A small number of systems do generate NMI's for bizarre random reasons such as power management so the default is unchanged. In other respects the new proc/sys entry works like the existing panic controls already in that directory. This is separate to the edac support - EDAC allows supported chipsets to handle ECC errors well, this change allows unsupported cases to at least panic rather than cause problems further down the line. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:27 +00:00
{
.ctl_name = KERN_PANIC_ON_NMI,
.procname = "panic_on_unrecovered_nmi",
.data = &panic_on_unrecovered_nmi,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
[PATCH] x86: add sysctl for kstack_depth_to_print Add sysctl for kstack_depth_to_print. This lets users change the amount of raw stack data printed in dump_stack() without having to reboot. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:11 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
.data = &kstack_depth_to_print,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
x86: various changes and cleanups to in_p/out_p delay details various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "David P. Reed" <dpreed@reed.com>
2008-01-30 12:30:05 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "io_delay_type",
.data = &io_delay_type,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
[PATCH] Fix undefined symbols for nommu architecture Signed-off-by: Luke Yang <luke.adi@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:28:07 +00:00
#if defined(CONFIG_MMU)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = KERN_RANDOMIZE,
.procname = "randomize_va_space",
.data = &randomize_va_space,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] Fix undefined symbols for nommu architecture Signed-off-by: Luke Yang <luke.adi@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:28:07 +00:00
#endif
[PATCH] s390: spinlock fixes Remove useless spin_retry_counter and fix compilation for UP kernels. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:21:00 +00:00
#if defined(CONFIG_S390) && defined(CONFIG_SMP)
[PATCH] s390: spin lock retry Split spin lock and r/w lock implementation into a single try which is done inline and an out of line function that repeatedly tries to get the lock before doing the cpu_relax(). Add a system control to set the number of retries before a cpu is yielded. The reason for the spin lock retry is that the diagnose 0x44 that is used to give up the virtual cpu is quite expensive. For spin locks that are held only for a short period of time the costs of the diagnoses outweights the savings for spin locks that are held for a longer timer. The default retry count is 1000. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 18:44:57 +00:00
{
.ctl_name = KERN_SPIN_RETRY,
.procname = "spin_retry",
.data = &spin_retry,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] suspend-to-ram: allow video options to be set at runtime Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:27:58 +00:00
#endif
ACPI: restore CONFIG_ACPI_SLEEP Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: Len Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-28 07:33:16 +00:00
#if defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
[PATCH] suspend-to-ram: allow video options to be set at runtime Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:27:58 +00:00
{
.procname = "acpi_video_flags",
PM: Integrate beeping flag with existing acpi_sleep flags Move "debug during resume from s2ram" into the variable we already use for real-mode flags to simplify code. It also closes nasty trap for the user in acpi_sleep_setup; order of parameters actually mattered there, acpi_sleep=s3_bios,s3_mode doing something different from acpi_sleep=s3_mode,s3_bios. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:47:41 +00:00
.data = &acpi_realmode_flags,
[PATCH] suspend-to-ram: allow video options to be set at runtime Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:27:58 +00:00
.maxlen = sizeof (unsigned long),
.mode = 0644,
[PATCH] fix acpi_video_flags on x86-64 acpi_video_flags variable is unsigned long, so it should be set as such. This actually matters on x86-64. Signed-off-by: Stefan Seyfried <seife@suse.de> Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-02 10:54:34 +00:00
.proc_handler = &proc_doulongvec_minmax,
[PATCH] suspend-to-ram: allow video options to be set at runtime Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-21 02:27:58 +00:00
},
[IA64] sysctl option to silence unaligned trap warnings Allow sysadmin to disable all warnings about userland apps making unaligned accesses by using: # echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap Rather than having to use prctl on a process by process basis. Default behaivour leaves the warnings enabled. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-28 17:42:23 +00:00
#endif
#ifdef CONFIG_IA64
{
.ctl_name = KERN_IA64_UNALIGNED,
.procname = "ignore-unaligned-usertrap",
.data = &no_unaligned_warning,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings Sometimes e.g. with crashme the compat layer warnings can be noisy. Add a way to turn them off by gating all output through compat_printk that checks a global sysctl. The default is not changed. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:52 +00:00
#endif
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
#ifdef CONFIG_DETECT_SOFTLOCKUP
softlockup: allow panic on lockup allow users to configure the softlockup detector to generate a panic instead of a warning message. high-availability systems might opt for this strict method (combined with panic_timeout= boot option/sysctl), instead of generating softlockup warnings ad infinitum. also, automated tests work better if the system reboots reliably (into a safe kernel) in case of a lockup. The full spectrum of configurability is supported: boot option, sysctl option and Kconfig option. it's default-disabled. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:04 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "softlockup_panic",
.data = &softlockup_panic,
.maxlen = sizeof(int),
.mode = 0644,
softlockup: fix invalid proc_handler for softlockup_panic The type of softlockup_panic is int, but the proc_handler is proc_doulongvec_minmax(). This handler is for unsigned long. This handler should be proc_dointvec_minmax(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 01:37:04 +00:00
.proc_handler = &proc_dointvec_minmax,
softlockup: allow panic on lockup allow users to configure the softlockup detector to generate a panic instead of a warning message. high-availability systems might opt for this strict method (combined with panic_timeout= boot option/sysctl), instead of generating softlockup warnings ad infinitum. also, automated tests work better if the system reboots reliably (into a safe kernel) in case of a lockup. The full spectrum of configurability is supported: boot option, sysctl option and Kconfig option. it's default-disabled. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:04 +00:00
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one,
},
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "softlockup_thresh",
.data = &softlockup_thresh,
softlockup: fix softlockup_thresh unaligned access and disable detection at runtime Fix unaligned access errors when setting softlockup_thresh on 64 bit platforms. Allow softlockup detection to be disabled by setting softlockup_thresh <= 0. Detect that boot time softlockup detection has been disabled earlier in softlockup_tick. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:14 +00:00
.maxlen = sizeof(int),
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
.mode = 0644,
softlockup: fix softlockup_thresh unaligned access and disable detection at runtime Fix unaligned access errors when setting softlockup_thresh on 64 bit platforms. Allow softlockup detection to be disabled by setting softlockup_thresh <= 0. Detect that boot time softlockup detection has been disabled earlier in softlockup_tick. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:14 +00:00
.proc_handler = &proc_dointvec_minmax,
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
.strategy = &sysctl_intvec,
softlockup: fix softlockup_thresh unaligned access and disable detection at runtime Fix unaligned access errors when setting softlockup_thresh on 64 bit platforms. Allow softlockup detection to be disabled by setting softlockup_thresh <= 0. Detect that boot time softlockup detection has been disabled earlier in softlockup_tick. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:14 +00:00
.extra1 = &neg_one,
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
.extra2 = &sixty,
},
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_check_count",
.data = &sysctl_hung_task_check_count,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.mode = 0644,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.strategy = &sysctl_intvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_timeout_secs",
.data = &sysctl_hung_task_timeout_secs,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.mode = 0644,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.strategy = &sysctl_intvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hung_task_warnings",
.data = &sysctl_hung_task_warnings,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.maxlen = sizeof(unsigned long),
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.mode = 0644,
softlockup: fix signedness fix softlockup tunables signedness. mark tunables read-mostly. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:34 +00:00
.proc_handler = &proc_doulongvec_minmax,
softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 20:08:02 +00:00
.strategy = &sysctl_intvec,
},
softlockup: add a /proc tuning parameter Control the trigger limit for softlockup warnings. This is useful for debugging softlockups, by lowering the softlockup_thresh to identify possible softlockups earlier. This patch: 1. Adds a sysctl softlockup_thresh with valid values of 1-60s (Higher value to disable false positives) 2. Changes the softlockup printk to print the cpu softlockup time [akpm@linux-foundation.org: Fix various warnings and add definition of "two"] Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:26:09 +00:00
#endif
[PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings Sometimes e.g. with crashme the compat layer warnings can be noisy. Add a way to turn them off by gating all output through compat_printk that checks a global sysctl. The default is not changed. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:52 +00:00
#ifdef CONFIG_COMPAT
{
.ctl_name = KERN_COMPAT_LOG,
.procname = "compat-log",
.data = &compat_log,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] s390: spin lock retry Split spin lock and r/w lock implementation into a single try which is done inline and an out of line function that repeatedly tries to get the lock before doing the cpu_relax(). Add a system control to set the number of retries before a cpu is yielded. The reason for the spin lock retry is that the diagnose 0x44 that is used to give up the virtual cpu is quite expensive. For spin locks that are held only for a short period of time the costs of the diagnoses outweights the savings for spin locks that are held for a longer timer. The default retry count is 1000. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 18:44:57 +00:00
#endif
[PATCH] pi-futex: rt mutex core Core functions for the rt-mutex subsystem. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 09:54:53 +00:00
#ifdef CONFIG_RT_MUTEXES
{
.ctl_name = KERN_MAX_LOCK_DEPTH,
.procname = "max_lock_depth",
.data = &max_lock_depth,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
proc: maps protection The /proc/pid/ "maps", "smaps", and "numa_maps" files contain sensitive information about the memory location and usage of processes. Issues: - maps should not be world-readable, especially if programs expect any kind of ASLR protection from local attackers. - maps cannot just be 0400 because "-D_FORTIFY_SOURCE=2 -O2" makes glibc check the maps when %n is in a *printf call, and a setuid(getuid()) process wouldn't be able to read its own maps file. (For reference see http://lkml.org/lkml/2006/1/22/150) - a system-wide toggle is needed to allow prior behavior in the case of non-root applications that depend on access to the maps contents. This change implements a check using "ptrace_may_attach" before allowing access to read the maps contents. To control this protection, the new knob /proc/sys/kernel/maps_protect has been added, with corresponding updates to the procfs documentation. [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: New sysctl numbers are old hat] Signed-off-by: Kees Cook <kees@outflux.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:26:04 +00:00
#ifdef CONFIG_PROC_FS
{
.ctl_name = CTL_UNNUMBERED,
.procname = "maps_protect",
.data = &maps_protect,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
Add common orderly_poweroff() Various pieces of code around the kernel want to be able to trigger an orderly poweroff. This pulls them together into a single implementation. By default the poweroff command is /sbin/poweroff, but it can be set via sysctl: kernel/poweroff_cmd. This is split at whitespace, so it can include command-line arguments. This patch replaces four other instances of invoking either "poweroff" or "shutdown -h now": two sbus drivers, and acpi thermal management. sparc64 has its own "powerd"; still need to determine whether it should be replaced by orderly_poweroff(). Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David S. Miller <davem@davemloft.net>
2007-07-18 01:37:02 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "poweroff_cmd",
.data = &poweroff_cmd,
.maxlen = POWEROFF_CMD_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
keys: make the keyring quotas controllable through /proc/sys Make the keyring quotas controllable through /proc/sys files: (*) /proc/sys/kernel/keys/root_maxkeys /proc/sys/kernel/keys/root_maxbytes Maximum number of keys that root may have and the maximum total number of bytes of data that root may have stored in those keys. (*) /proc/sys/kernel/keys/maxkeys /proc/sys/kernel/keys/maxbytes Maximum number of keys that each non-root user may have and the maximum total number of bytes of data that each of those users may have stored in their keys. Also increase the quotas as a number of people have been complaining that it's not big enough. I'm not sure that it's big enough now either, but on the other hand, it can now be set in /etc/sysctl.conf. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <kwc@citi.umich.edu> Cc: <arunsr@cse.iitk.ac.in> Cc: <dwalsh@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:01:32 +00:00
#ifdef CONFIG_KEYS
{
.ctl_name = CTL_UNNUMBERED,
.procname = "keys",
.mode = 0555,
.child = key_sysctls,
},
#endif
rcu: make rcutorture more vicious: reinstate boot-time testing This patch re-institutes the ability to build rcutorture directly into the Linux kernel. The reason that this capability was removed was that this could result in your kernel being pretty much useless, as rcutorture would be running starting from early boot. This problem has been avoided by (1) making rcutorture run only three seconds of every six by default, (2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture to be quiesced at boot time, and (3) adding a sysctl in /proc named /proc/sys/kernel/rcutorture_runnable that permits rcutorture to be quiesced and unquiesced when built into the kernel. Please note that this /proc file is -not- available when rcutorture is built as a module. Please also note that to get the earlier take-no-prisoners behavior, you must use the boot command line to set rcutorture's "stutter" parameter to zero. The rcutorture quiescing mechanism is currently quite crude: loops in each rcutorture process that poll a global variable once per tick. Suggestions for improvement are welcome. The default action will be to reduce the polling rate to a few times per second. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-18 16:26:49 +00:00
#ifdef CONFIG_RCU_TORTURE_TEST
{
.ctl_name = CTL_UNNUMBERED,
.procname = "rcutorture_runnable",
.data = &rcutorture_runnable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
kernel/sysctl.c: finish off the warning comments I've been chasing these comments around this file all week. Hopefully we're straight now. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:50:35 +00:00
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
};
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table vm_table[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = VM_OVERCOMMIT_MEMORY,
.procname = "overcommit_memory",
.data = &sysctl_overcommit_memory,
.maxlen = sizeof(sysctl_overcommit_memory),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] support for panic at OOM This patch adds panic_on_oom sysctl under sys.vm. When sysctl vm.panic_on_oom = 1, the kernel panics intead of killing rogue processes. And if vm.panic_on_oom is 0 the kernel will do oom_kill() in the same way as it does today. Of course, the default value is 0 and only root can modifies it. In general, oom_killer works well and kill rogue processes. So the whole system can survive. But there are environments where panic is preferable rather than kill some processes. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:13 +00:00
{
.ctl_name = VM_PANIC_ON_OOM,
.procname = "panic_on_oom",
.data = &sysctl_panic_on_oom,
.maxlen = sizeof(sysctl_panic_on_oom),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
oom: add oom_kill_allocating_task sysctl Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill the OOM-triggering task instead of scanning through the tasklist to find a memory-hogging target. This is helpful for systems with an insanely large number of tasks where scanning the tasklist significantly degrades performance. Cc: Andrea Arcangeli <andrea@suse.de> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:25:56 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "oom_kill_allocating_task",
.data = &sysctl_oom_kill_allocating_task,
.maxlen = sizeof(sysctl_oom_kill_allocating_task),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
oom: add sysctl to enable task memory dump Adds a new sysctl, 'oom_dump_tasks', that enables the kernel to produce a dump of all system tasks (excluding kernel threads) when performing an OOM-killing. Information includes pid, uid, tgid, vm size, rss, cpu, oom_adj score, and name. This is helpful for determining why there was an OOM condition and which rogue task caused it. It is configurable so that large systems, such as those with several thousand tasks, do not incur a performance penalty associated with dumping data they may not desire. If an OOM was triggered as a result of a memory controller, the tasklist shall be filtered to exclude tasks that are not a member of the same cgroup. Cc: Andrea Arcangeli <andrea@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:14:07 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "oom_dump_tasks",
.data = &sysctl_oom_dump_tasks,
.maxlen = sizeof(sysctl_oom_dump_tasks),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = VM_OVERCOMMIT_RATIO,
.procname = "overcommit_ratio",
.data = &sysctl_overcommit_ratio,
.maxlen = sizeof(sysctl_overcommit_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_PAGE_CLUSTER,
.procname = "page-cluster",
.data = &page_cluster,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_DIRTY_BACKGROUND,
.procname = "dirty_background_ratio",
.data = &dirty_background_ratio,
.maxlen = sizeof(dirty_background_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.ctl_name = VM_DIRTY_RATIO,
.procname = "dirty_ratio",
.data = &vm_dirty_ratio,
.maxlen = sizeof(vm_dirty_ratio),
.mode = 0644,
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 06:25:50 +00:00
.proc_handler = &dirty_ratio_handler,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.procname = "dirty_writeback_centisecs",
[PATCH] Represent dirty_*_centisecs as jiffies internally Make that the internal values for: /proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs are stored as jiffies instead of centiseconds. Let the sysctl interface do the conversions with full precision using clock_t_to_jiffies, instead of doing overflow-sensitive on-the-fly conversions every time the values are used. Cons: apparent precision loss if HZ is not a multiple of 100, because of conversion back and forth. This is a common problem for all sysctl values that use proc_dointvec_userhz_jiffies. (There is only one other in-tree use, in net/core/neighbour.c.) Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:48 +00:00
.data = &dirty_writeback_interval,
.maxlen = sizeof(dirty_writeback_interval),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.mode = 0644,
.proc_handler = &dirty_writeback_centisecs_handler,
},
{
.procname = "dirty_expire_centisecs",
[PATCH] Represent dirty_*_centisecs as jiffies internally Make that the internal values for: /proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs are stored as jiffies instead of centiseconds. Let the sysctl interface do the conversions with full precision using clock_t_to_jiffies, instead of doing overflow-sensitive on-the-fly conversions every time the values are used. Cons: apparent precision loss if HZ is not a multiple of 100, because of conversion back and forth. This is a common problem for all sysctl values that use proc_dointvec_userhz_jiffies. (There is only one other in-tree use, in net/core/neighbour.c.) Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:48 +00:00
.data = &dirty_expire_interval,
.maxlen = sizeof(dirty_expire_interval),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.mode = 0644,
[PATCH] Represent dirty_*_centisecs as jiffies internally Make that the internal values for: /proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs are stored as jiffies instead of centiseconds. Let the sysctl interface do the conversions with full precision using clock_t_to_jiffies, instead of doing overflow-sensitive on-the-fly conversions every time the values are used. Cons: apparent precision loss if HZ is not a multiple of 100, because of conversion back and forth. This is a common problem for all sysctl values that use proc_dointvec_userhz_jiffies. (There is only one other in-tree use, in net/core/neighbour.c.) Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:48 +00:00
.proc_handler = &proc_dointvec_userhz_jiffies,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
.ctl_name = VM_NR_PDFLUSH_THREADS,
.procname = "nr_pdflush_threads",
.data = &nr_pdflush_threads,
.maxlen = sizeof nr_pdflush_threads,
.mode = 0444 /* read-only*/,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.data = &vm_swappiness,
.maxlen = sizeof(vm_swappiness),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
#ifdef CONFIG_HUGETLB_PAGE
{
.procname = "nr_hugepages",
.data = &max_huge_pages,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &hugetlb_sysctl_handler,
.extra1 = (void *)&hugetlb_zero,
.extra2 = (void *)&hugetlb_infinity,
},
{
.ctl_name = VM_HUGETLB_GROUP,
.procname = "hugetlb_shm_group",
.data = &sysctl_hugetlb_shm_group,
.maxlen = sizeof(gid_t),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
Allow huge page allocations to use GFP_HIGH_MOVABLE Huge pages are not movable so are not allocated from ZONE_MOVABLE. However, as ZONE_MOVABLE will always have pages that can be migrated or reclaimed, it can be used to satisfy hugepage allocations even when the system has been running a long time. This allows an administrator to resize the hugepage pool at runtime depending on the size of ZONE_MOVABLE. This patch adds a new sysctl called hugepages_treat_as_movable. When a non-zero value is written to it, future allocations for the huge page pool will use ZONE_MOVABLE. Despite huge pages being non-movable, we do not introduce additional external fragmentation of note as huge pages are always the largest contiguous block we care about. [akpm@linux-foundation.org: various fixes] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 11:03:13 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "hugepages_treat_as_movable",
.data = &hugepages_treat_as_movable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &hugetlb_treat_movable_handler,
},
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "nr_overcommit_hugepages",
hugetlb: fix overcommit locking proc_doulongvec_minmax() calls copy_to_user()/copy_from_user(), so we can't hold hugetlb_lock over the call. Use a dummy variable to store the sysctl result, like in hugetlb_sysctl_handler(), then grab the lock to update nr_overcommit_huge_pages. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Reported-by: Miles Lane <miles.lane@gmail.com> Cc: Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13 23:03:19 +00:00
.data = &sysctl_overcommit_huge_pages,
.maxlen = sizeof(sysctl_overcommit_huge_pages),
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
.mode = 0644,
hugetlb: add locking for overcommit sysctl When I replaced hugetlb_dynamic_pool with nr_overcommit_hugepages I used proc_doulongvec_minmax() directly. However, hugetlb.c's locking rules require that all counter modifications occur under the hugetlb_lock. Add a callback into the hugetlb code similar to the one for nr_hugepages. Grab the lock around the manipulation of nr_overcommit_hugepages in proc_doulongvec_minmax(). Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:18:18 +00:00
.proc_handler = &hugetlb_overcommit_handler,
hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
{
.ctl_name = VM_LOWMEM_RESERVE_RATIO,
.procname = "lowmem_reserve_ratio",
.data = &sysctl_lowmem_reserve_ratio,
.maxlen = sizeof(sysctl_lowmem_reserve_ratio),
.mode = 0644,
.proc_handler = &lowmem_reserve_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
},
[PATCH] drop-pagecache Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to discard as much pagecache and/or reclaimable slab objects as it can. THis operation requires root permissions. It won't drop dirty data, so the user should run `sync' first. Caveats: a) Holds inode_lock for exorbitant amounts of time. b) Needs to be taught about NUMA nodes: propagate these all the way through so the discarding can be controlled on a per-node basis. This is a debugging feature: useful for getting consistent results between filesystem benchmarks. We could possibly put it under a config option, but it's less than 300 bytes. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:00:39 +00:00
{
.ctl_name = VM_DROP_PAGECACHE,
.procname = "drop_caches",
.data = &sysctl_drop_caches,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = drop_caches_sysctl_handler,
.strategy = &sysctl_intvec,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = VM_MIN_FREE_KBYTES,
.procname = "min_free_kbytes",
.data = &min_free_kbytes,
.maxlen = sizeof(min_free_kbytes),
.mode = 0644,
.proc_handler = &min_free_kbytes_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
[PATCH] Make high and batch sizes of per_cpu_pagelists configurable As recently there has been lot of traffic on the right values for batch and high water marks for per_cpu_pagelists. This patch makes these two variables configurable through /proc interface. A new tunable /proc/sys/vm/percpu_pagelist_fraction is added. This entry controls the fraction of pages at most in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8) Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:00:40 +00:00
{
.ctl_name = VM_PERCPU_PAGELIST_FRACTION,
.procname = "percpu_pagelist_fraction",
.data = &percpu_pagelist_fraction,
.maxlen = sizeof(percpu_pagelist_fraction),
.mode = 0644,
.proc_handler = &percpu_pagelist_fraction_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_percpu_pagelist_fract,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_MMU
{
.ctl_name = VM_MAX_MAP_COUNT,
.procname = "max_map_count",
.data = &sysctl_max_map_count,
.maxlen = sizeof(sysctl_max_map_count),
.mode = 0644,
.proc_handler = &proc_dointvec
},
#endif
{
.ctl_name = VM_LAPTOP_MODE,
.procname = "laptop_mode",
.data = &laptop_mode,
.maxlen = sizeof(laptop_mode),
.mode = 0644,
[PATCH] Represent laptop_mode as jiffies internally Make that the internal value for /proc/sys/vm/laptop_mode is stored as jiffies instead of seconds. Let the sysctl interface do the conversions, instead of doing on-the-fly conversions every time the value is used. Add a description of the fact that laptop_mode doubles as a flag and a timeout to the comment above the laptop_mode variable. Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:49 +00:00
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
.ctl_name = VM_BLOCK_DUMP,
.procname = "block_dump",
.data = &block_dump,
.maxlen = sizeof(block_dump),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_VFS_CACHE_PRESSURE,
.procname = "vfs_cache_pressure",
.data = &sysctl_vfs_cache_pressure,
.maxlen = sizeof(sysctl_vfs_cache_pressure),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
{
.ctl_name = VM_LEGACY_VA_LAYOUT,
.procname = "legacy_va_layout",
.data = &sysctl_legacy_va_layout,
.maxlen = sizeof(sysctl_legacy_va_layout),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#endif
[PATCH] Zone reclaim: proc override proc support for zone reclaim This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be used to override the automatic determination of the zone reclaim made on bootup. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:42:32 +00:00
#ifdef CONFIG_NUMA
{
.ctl_name = VM_ZONE_RECLAIM_MODE,
.procname = "zone_reclaim_mode",
.data = &zone_reclaim_mode,
.maxlen = sizeof(zone_reclaim_mode),
.mode = 0644,
.proc_handler = &proc_dointvec,
[PATCH] zone_reclaim: minor fixes - If we only reclaim nr_pages then its okay to stay on node. Switch from > to >= for the comparison. - vm_table[] entry for zone_reclaim_mode is a bit screwed up. - Add empty lines around shrink_zone to show that this is the central function to be called. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 11:05:29 +00:00
.strategy = &sysctl_intvec,
.extra1 = &zero,
[PATCH] Zone reclaim: proc override proc support for zone reclaim This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be used to override the automatic determination of the zone reclaim made on bootup. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:42:32 +00:00
},
[PATCH] ZVC/zone_reclaim: Leave 1% of unmapped pagecache pages for file I/O It turns out that it is advantageous to leave a small portion of unmapped file backed pages if all of a zone's pages (or almost all pages) are allocated and so the page allocator has to go off-node. This allows recently used file I/O buffers to stay on the node and reduces the times that zone reclaim is invoked if file I/O occurs when we run out of memory in a zone. The problem is that zone reclaim runs too frequently when the page cache is used for file I/O (read write and therefore unmapped pages!) alone and we have almost all pages of the zone allocated. Zone reclaim may remove 32 unmapped pages. File I/O will use these pages for the next read/write requests and the unmapped pages increase. After the zone has filled up again zone reclaim will remove it again after only 32 pages. This cycle is too inefficient and there are potentially too many zone reclaim cycles. With the 1% boundary we may still remove all unmapped pages for file I/O in zone reclaim pass. However. it will take a large number of read and writes to get back to 1% again where we trigger zone reclaim again. The zone reclaim 2.6.16/17 does not show this behavior because we have a 30 second timeout. [akpm@osdl.org: rename the /proc file and the variable] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:13 +00:00
{
.ctl_name = VM_MIN_UNMAPPED,
.procname = "min_unmapped_ratio",
.data = &sysctl_min_unmapped_ratio,
.maxlen = sizeof(sysctl_min_unmapped_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_unmapped_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:31:52 +00:00
{
.ctl_name = VM_MIN_SLAB,
.procname = "min_slab_ratio",
.data = &sysctl_min_slab_ratio,
.maxlen = sizeof(sysctl_min_slab_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_slab_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 09:53:50 +00:00
#endif
Make vm statistics update interval configurable Make it configurable. Code in mm makes the vm statistics intervals independent from the cache reaper use that opportunity to make it configurable. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 09:35:13 +00:00
#ifdef CONFIG_SMP
{
.ctl_name = CTL_UNNUMBERED,
.procname = "stat_interval",
.data = &sysctl_stat_interval,
.maxlen = sizeof(sysctl_stat_interval),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
#endif
security: Protection for exploiting null dereference using mmap Add a new security check on mmap operations to see if the user is attempting to mmap to low area of the address space. The amount of space protected is indicated by the new proc tunable /proc/sys/vm/mmap_min_addr and defaults to 0, preserving existing behavior. This patch uses a new SELinux security class "memprotect." Policy already contains a number of allow rules like a_t self:process * (unconfined_t being one of them) which mean that putting this check in the process class (its best current fit) would make it useless as all user processes, which we also want to protect against, would be allowed. By taking the memprotect name of the new class it will also make it possible for us to move some of the other memory protect permissions out of 'process' and into the new class next time we bump the policy version number (which I also think is a good future idea) Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2007-06-28 19:55:21 +00:00
#ifdef CONFIG_SECURITY
{
.ctl_name = CTL_UNNUMBERED,
.procname = "mmap_min_addr",
.data = &mmap_min_addr,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
Fix missing numa_zonelist_order sysctl Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-10 20:00:51 +00:00
#endif
change zonelist order: zonelist order selection logic Make zonelist creation policy selectable from sysctl/boot option v6. This patch makes NUMA's zonelist (of pgdat) order selectable. Available order are Default(automatic)/ Node-based / Zone-based. [Default Order] The kernel selects Node-based or Zone-based order automatically. [Node-based Order] This policy treats the locality of memory as the most important parameter. Zonelist order is created by each zone's locality. This means lower zones (ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion. IOW. ZONE_DMA will be in the middle of zonelist. current 2.6.21 kernel uses this. Pros. * A user can expect local memory as much as possible. Cons. * lower zone will be exhansted before higher zone. This may cause OOM_KILL. Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL because of ZONE_DMA exhaution and you need the best locality. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. [Zone-based order] This policy treats the zone type as the most important parameter. Zonelist order is created by zone-type order. This means lower zone never be used bofere higher zone exhaustion. IOW. ZONE_DMA will be always at the tail of zonelist. Pros. * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted. Cons. * memory locality may not be best. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. bootoption "numa_zonelist_order=" and proc/sysctl is supporetd. command: %echo N > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Node-based order. command: %echo Z > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Zone-based order. Thanks to Lee Schermerhorn, he gives me much help and codes. [Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order] [akpm@linux-foundation.org: build fix] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:38:01 +00:00
#ifdef CONFIG_NUMA
{
.ctl_name = CTL_UNNUMBERED,
.procname = "numa_zonelist_order",
.data = &numa_zonelist_order,
.maxlen = NUMA_ZONELIST_ORDER_LEN,
.mode = 0644,
.proc_handler = &numa_zonelist_order_handler,
.strategy = &sysctl_string,
},
#endif
minimal build fixes for uml (fallout from x86 merge) a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now b) arch/{i386,x86_64}/crypto are merged now c) subarch-obj needed changes d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h> since it can be included from asm-um/cpufeature.h e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not for Kconfig f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one should be registered from corresponding arch/*/kernel/*, with ifdef going away; that's a separate patch, though). With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix") we have uml allmodconfig building both on i386 and amd64. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 07:16:04 +00:00
#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
sysctl: Support vdso_enabled sysctl on SH. All of the logic for this was already in place, we just hadn't wired it up in the sysctl table. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-01 01:07:42 +00:00
(defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 09:53:50 +00:00
{
.ctl_name = VM_VDSO_ENABLED,
.procname = "vdso_enabled",
.data = &vdso_enabled,
.maxlen = sizeof(vdso_enabled),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
mm/page-writeback: highmem_is_dirtyable option Add vm.highmem_is_dirtyable toggle A 32 bit machine with HIGHMEM64 enabled running DCC has an MMAPed file of approximately 2Gb size which contains a hash format that is written randomly by the dbclean process. On 2.6.16 this process took a few minutes. With lowmem only accounting of dirty ratios, this takes about 12 hours of 100% disk IO, all random writes. Include a toggle in /proc/sys/vm/highmem_is_dirtyable which can be set to 1 to add the highmem back to the total available memory count. [akpm@linux-foundation.org: Fix the CONFIG_DETECT_SOFTLOCKUP=y build] Signed-off-by: Bron Gondwana <brong@fastmail.fm> Cc: Ethan Solomita <solo@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:29:20 +00:00
#ifdef CONFIG_HIGHMEM
{
.ctl_name = CTL_UNNUMBERED,
.procname = "highmem_is_dirtyable",
.data = &vm_highmem_is_dirtyable,
.maxlen = sizeof(vm_highmem_is_dirtyable),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one,
},
#endif
sysctl.c: add text telling people to use CTL_UNNUMBERED Hopefully this will help people to understand the new regime. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:41:21 +00:00
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
};
[PATCH] sysctl: create sys/fs/binfmt_misc as an ordinary sysctl entry binfmt_misc has a mount point in the middle of the sysctl and that mount point is created as a proc_generic directory. Doing it that way gets in the way of cleaning up the sysctl proc support as it continues the existence of a horrible hack. So instead simply create the directory as an ordinary sysctl directory. At least that removes the magic special case. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:07 +00:00
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table binfmt_misc_table[] = {
[PATCH] sysctl: create sys/fs/binfmt_misc as an ordinary sysctl entry binfmt_misc has a mount point in the middle of the sysctl and that mount point is created as a proc_generic directory. Doing it that way gets in the way of cleaning up the sysctl proc support as it continues the existence of a horrible hack. So instead simply create the directory as an ordinary sysctl directory. At least that removes the magic special case. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:07 +00:00
{ .ctl_name = 0 }
};
#endif
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table fs_table[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = FS_NRINODE,
.procname = "inode-nr",
.data = &inodes_stat,
.maxlen = 2*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_STATINODE,
.procname = "inode-state",
.data = &inodes_stat,
.maxlen = 7*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.procname = "file-nr",
.data = &files_stat,
.maxlen = 3*sizeof(int),
.mode = 0444,
[PATCH] fix file counting I have benchmarked this on an x86_64 NUMA system and see no significant performance difference on kernbench. Tested on both x86_64 and powerpc. The way we do file struct accounting is not very suitable for batched freeing. For scalability reasons, file accounting was constructor/destructor based. This meant that nr_files was decremented only when the object was removed from the slab cache. This is susceptible to slab fragmentation. With RCU based file structure, consequent batched freeing and a test program like Serge's, we just speed this up and end up with a very fragmented slab - llm22:~ # cat /proc/sys/fs/file-nr 587730 0 758844 At the same time, I see only a 2000+ objects in filp cache. The following patch I fixes this problem. This patch changes the file counting by removing the filp_count_lock. Instead we use a separate percpu counter, nr_files, for now and all accesses to it are through get_nr_files() api. In the sysctl handler for nr_files, we populate files_stat.nr_files before returning to user. Counting files as an when they are created and destroyed (as opposed to inside slab) allows us to correctly count open files with RCU. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08 05:55:35 +00:00
.proc_handler = &proc_nr_files,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
.ctl_name = FS_MAXFILE,
.procname = "file-max",
.data = &files_stat.max_files,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
get rid of NR_OPEN and introduce a sysctl_nr_open NR_OPEN (historically set to 1024*1024) actually forbids processes to open more than 1024*1024 handles. Unfortunatly some production servers hit the not so 'ridiculously high value' of 1024*1024 file descriptors per process. Changing NR_OPEN is not considered safe because of vmalloc space potential exhaust. This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to 1024*1024, so that admins can decide to change this limit if their workload needs it. [akpm@linux-foundation.org: export it for sparc64] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:16 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "nr_open",
.data = &sysctl_nr_open,
.maxlen = sizeof(int),
.mode = 0644,
[PATCH] avoid multiplication overflows and signedness issues for max_fds Limit sysctl_nr_open - we don't want ->max_fds to exceed MAX_INT and we don't want size calculation for ->fd[] to overflow. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-10 14:08:32 +00:00
.proc_handler = &proc_dointvec_minmax,
.extra1 = &sysctl_nr_open_min,
.extra2 = &sysctl_nr_open_max,
get rid of NR_OPEN and introduce a sysctl_nr_open NR_OPEN (historically set to 1024*1024) actually forbids processes to open more than 1024*1024 handles. Unfortunatly some production servers hit the not so 'ridiculously high value' of 1024*1024 file descriptors per process. Changing NR_OPEN is not considered safe because of vmalloc space potential exhaust. This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to 1024*1024, so that admins can decide to change this limit if their workload needs it. [akpm@linux-foundation.org: export it for sparc64] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:16 +00:00
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
.ctl_name = FS_DENTRY,
.procname = "dentry-state",
.data = &dentry_stat,
.maxlen = 6*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_OVERFLOWUID,
.procname = "overflowuid",
.data = &fs_overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_OVERFLOWGID,
.procname = "overflowgid",
.data = &fs_overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_LEASES,
.procname = "leases-enable",
.data = &leases_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef CONFIG_DNOTIFY
{
.ctl_name = FS_DIR_NOTIFY,
.procname = "dir-notify-enable",
.data = &dir_notify_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MMU
{
.ctl_name = FS_LEASE_TIME,
.procname = "lease-break-time",
.data = &lease_break_time,
.maxlen = sizeof(int),
.mode = 0644,
coredump masking: bound suid_dumpable sysctl This patch series is version 5 of the core dump masking feature, which controls which VMAs should be dumped based on their memory types and per-process flags. I adopted most of Andrew's suggestion at the previous version. He also suggested using system call instead of /proc/<pid>/ interface, I decided to use the latter continuously because adding new system call with pid argument will give a big impact on the kernel. You can access the per-process flags via /proc/<pid>/coredump_filter interface. coredump_filter represents a bitmask of memory types, and if a bit is set, VMAs of corresponding memory type are written into a core file when the process is dumped. The bitmask is inherited from the parent process when a process is created. The original purpose is to avoid longtime system slowdown when a number of processes which share a huge shared memory are dumped at the same time. To achieve this purpose, this patch series adds an ability to suppress dumping anonymous shared memory for specified processes. In this version, three other memory types are also supported. Here are the coredump_filter bits: bit 0: anonymous private memory bit 1: anonymous shared memory bit 2: file-backed private memory bit 3: file-backed shared memory The default value of coredump_filter is 0x3. This means the new core dump routine has the same behavior as conventional behavior by default. In this version, coredump_filter bits and mm.dumpable are merged into mm.flags, and it is accessed by atomic bitops. The supported core file formats are ELF and ELF-FDPIC. ELF has been tested, but ELF-FDPIC has not been built and tested because I don't have the test environment. This patch limits a value of suid_dumpable sysctl to the range of 0 to 2. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:48:26 +00:00
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &two,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
.procname = "aio-nr",
.data = &aio_nr,
.maxlen = sizeof(aio_nr),
.mode = 0444,
[PATCH] aio: remove aio_max_nr accounting race AIO was adding a new context's max requests to the global total before testing if that resulting total was over the global limit. This let innocent tasks get their new limit tested along with a racing guilty task that was crossing the limit. This serializes the _nr accounting with a spinlock It also switches to using unsigned long for the global totals. Individual contexts are still limited to an unsigned int's worth of requests by the syscall interface. The problem and fix were verified with a simple program that spun creating and destroying a context while holding on to another long lived context. Before the patch a task creating a tiny context could get a spurious EAGAIN if it raced with a task creating a very large context that overran the limit. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:59:31 +00:00
.proc_handler = &proc_doulongvec_minmax,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
{
.procname = "aio-max-nr",
.data = &aio_max_nr,
.maxlen = sizeof(aio_max_nr),
.mode = 0644,
[PATCH] aio: remove aio_max_nr accounting race AIO was adding a new context's max requests to the global total before testing if that resulting total was over the global limit. This let innocent tasks get their new limit tested along with a racing guilty task that was crossing the limit. This serializes the _nr accounting with a spinlock It also switches to using unsigned long for the global totals. Individual contexts are still limited to an unsigned int's worth of requests by the syscall interface. The problem and fix were verified with a simple program that spun creating and destroying a context while holding on to another long lived context. Before the patch a task creating a tiny context could get a spurious EAGAIN if it raced with a task creating a very large context that overran the limit. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:59:31 +00:00
.proc_handler = &proc_doulongvec_minmax,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
},
[PATCH] inotify (1/5): split kernel API from userspace support The following series of patches introduces a kernel API for inotify, making it possible for kernel modules to benefit from inotify's mechanism for watching inodes. With these patches, inotify will maintain for each caller a list of watches (via an embedded struct inotify_watch), where each inotify_watch is associated with a corresponding struct inode. The caller registers an event handler and specifies for which filesystem events their event handler should be called per inotify_watch. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Acked-by: Robert Love <rml@novell.com> Acked-by: John McCutchan <john@johnmccutchan.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-01 20:10:59 +00:00
#ifdef CONFIG_INOTIFY_USER
[PATCH] inotify: move sysctl This moves the inotify sysctl knobs to "/proc/sys/fs/inotify" from "/proc/sys/fs". Also some related cleanup. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 16:38:18 +00:00
{
.ctl_name = FS_INOTIFY,
.procname = "inotify",
.mode = 0555,
.child = inotify_table,
},
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:43 +00:00
{
.ctl_name = KERN_SETUID_DUMPABLE,
.procname = "suid_dumpable",
.data = &suid_dumpable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
[PATCH] sysctl: create sys/fs/binfmt_misc as an ordinary sysctl entry binfmt_misc has a mount point in the middle of the sysctl and that mount point is created as a proc_generic directory. Doing it that way gets in the way of cleaning up the sysctl proc support as it continues the existence of a horrible hack. So instead simply create the directory as an ordinary sysctl directory. At least that removes the magic special case. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:07 +00:00
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "binfmt_misc",
.mode = 0555,
.child = binfmt_misc_table,
},
#endif
sysctl.c: add text telling people to use CTL_UNNUMBERED Hopefully this will help people to understand the new regime. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:41:21 +00:00
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
};
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table debug_table[] = {
[POWERPC] Implement logging of unhandled signals Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12 00:20:07 +00:00
#if defined(CONFIG_X86) || defined(CONFIG_PPC)
x86: i386-show-unhandled-signals-v3 This patch makes the i386 behave the same way that x86_64 does when a segfault happens. A line gets printed to the kernel log so that tools that need to check for failures can behave more uniformly between debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 > /proc/sys/debug/exception-trace) Also, all of the lines being printed are now using printk_ratelimit() to deny the ability of DoS from a local user with a program like the following: main() { while (1) if (!fork()) *(int *)0 = 0; } This new revision also includes the fix that Andrew did which got rid of new sysctl that was added to the system in earlier versions of this. Also, 'show-unhandled-signals' sysctl has been renamed back to the old 'exception-trace' to avoid breakage of people's scripts. AK: Enabling by default for i386 will be likely controversal, but let's see what happens AK: Really folks, before complaining just fix your segfaults AK: I bet this will find a lot of silent issues Signed-off-by: Masoud Sharbiani <masouds@google.com> Signed-off-by: Andi Kleen <ak@suse.de> [ Personally, I've found the complaints useful on x86-64, so I'm all for this. That said, I wonder if we could do it more prettily.. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 09:12:28 +00:00
{
.ctl_name = CTL_UNNUMBERED,
.procname = "exception-trace",
.data = &show_unhandled_signals,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
};
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static struct ctl_table dev_table[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ .ctl_name = 0 }
[PATCH] inotify inotify is intended to correct the deficiencies of dnotify, particularly its inability to scale and its terrible user interface: * dnotify requires the opening of one fd per each directory that you intend to watch. This quickly results in too many open files and pins removable media, preventing unmount. * dnotify is directory-based. You only learn about changes to directories. Sure, a change to a file in a directory affects the directory, but you are then forced to keep a cache of stat structures. * dnotify's interface to user-space is awful. Signals? inotify provides a more usable, simple, powerful solution to file change notification: * inotify's interface is a system call that returns a fd, not SIGIO. You get a single fd, which is select()-able. * inotify has an event that says "the filesystem that the item you were watching is on was unmounted." * inotify can watch directories or files. Inotify is currently used by Beagle (a desktop search infrastructure), Gamin (a FAM replacement), and other projects. See Documentation/filesystems/inotify.txt. Signed-off-by: Robert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 21:06:03 +00:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
static DEFINE_SPINLOCK(sysctl_lock);
/* called under sysctl_lock */
static int use_table(struct ctl_table_header *p)
{
if (unlikely(p->unregistering))
return 0;
p->used++;
return 1;
}
/* called under sysctl_lock */
static void unuse_table(struct ctl_table_header *p)
{
if (!--p->used)
if (unlikely(p->unregistering))
complete(p->unregistering);
}
/* called under sysctl_lock, will reacquire if has to wait */
static void start_unregistering(struct ctl_table_header *p)
{
/*
* if p->used is 0, nobody will ever touch that entry again;
* we'll eliminate all paths to it before dropping sysctl_lock
*/
if (unlikely(p->used)) {
struct completion wait;
init_completion(&wait);
p->unregistering = &wait;
spin_unlock(&sysctl_lock);
wait_for_completion(&wait);
spin_lock(&sysctl_lock);
}
/*
* do not remove from the list until nobody holds it; walking the
* list in do_sysctl() relies on that.
*/
list_del_init(&p->ctl_entry);
}
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
void sysctl_head_finish(struct ctl_table_header *head)
{
if (!head)
return;
spin_lock(&sysctl_lock);
unuse_table(head);
spin_unlock(&sysctl_lock);
}
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
static struct list_head *
lookup_header_list(struct ctl_table_root *root, struct nsproxy *namespaces)
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
{
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
struct list_head *header_list;
header_list = &root->header_list;
if (root->lookup)
header_list = root->lookup(root, namespaces);
return header_list;
}
struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
struct ctl_table_header *prev)
{
struct ctl_table_root *root;
struct list_head *header_list;
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
struct ctl_table_header *head;
struct list_head *tmp;
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
spin_lock(&sysctl_lock);
if (prev) {
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
head = prev;
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
tmp = &prev->ctl_entry;
unuse_table(prev);
goto next;
}
tmp = &root_table_header.ctl_entry;
for (;;) {
head = list_entry(tmp, struct ctl_table_header, ctl_entry);
if (!use_table(head))
goto next;
spin_unlock(&sysctl_lock);
return head;
next:
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
root = head->root;
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
tmp = tmp->next;
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
header_list = lookup_header_list(root, namespaces);
if (tmp != header_list)
continue;
do {
root = list_entry(root->root_list.next,
struct ctl_table_root, root_list);
if (root == &sysctl_table_root)
goto out;
header_list = lookup_header_list(root, namespaces);
} while (list_empty(header_list));
tmp = header_list->next;
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
}
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
out:
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
spin_unlock(&sysctl_lock);
return NULL;
}
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev)
{
return __sysctl_head_next(current->nsproxy, prev);
}
void register_sysctl_root(struct ctl_table_root *root)
{
spin_lock(&sysctl_lock);
list_add_tail(&root->root_list, &sysctl_table_root.root_list);
spin_unlock(&sysctl_lock);
}
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#ifdef CONFIG_SYSCTL_SYSCALL
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
/* Perform the actual read/write of a sysctl table entry. */
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
static int do_sysctl_strategy(struct ctl_table_root *root,
struct ctl_table *table,
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
int op = 0, rc;
if (oldval)
op |= 004;
if (newval)
op |= 002;
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
if (sysctl_perm(root, table, op))
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
return -EPERM;
if (table->strategy) {
rc = table->strategy(table, name, nlen, oldval, oldlenp,
newval, newlen);
if (rc < 0)
return rc;
if (rc > 0)
return 0;
}
/* If there is no strategy routine, or if the strategy returns
* zero, proceed with automatic r/w */
if (table->data && table->maxlen) {
rc = sysctl_data(table, name, nlen, oldval, oldlenp,
newval, newlen);
if (rc < 0)
return rc;
}
return 0;
}
static int parse_table(int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen,
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
struct ctl_table_root *root,
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
struct ctl_table *table)
{
int n;
repeat:
if (!nlen)
return -ENOTDIR;
if (get_user(n, name))
return -EFAULT;
for ( ; table->ctl_name || table->procname; table++) {
if (!table->ctl_name)
continue;
if (n == table->ctl_name) {
int error;
if (table->child) {
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
if (sysctl_perm(root, table, 001))
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
return -EPERM;
name++;
nlen--;
table = table->child;
goto repeat;
}
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
error = do_sysctl_strategy(root, table, name, nlen,
sysctl: clean from unneeded extern and forward declarations The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:41 +00:00
oldval, oldlenp,
newval, newlen);
return error;
}
}
return -ENOTDIR;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
struct ctl_table_header *head;
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
int error = -ENOTDIR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (nlen <= 0 || nlen >= CTL_MAXNAME)
return -ENOTDIR;
if (oldval) {
int old_len;
if (!oldlenp || get_user(old_len, oldlenp))
return -EFAULT;
}
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
for (head = sysctl_head_next(NULL); head;
head = sysctl_head_next(head)) {
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
error = parse_table(name, nlen, oldval, oldlenp,
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
newval, newlen,
head->root, head->ctl_table);
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
if (error != -ENOTDIR) {
sysctl_head_finish(head);
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
break;
[PATCH] sysctl: factor out sysctl_head_next from do_sysctl The current logic to walk through the list of sysctl table headers is slightly painful and implement in a way it cannot be used by code outside sysctl.c I am in the process of implementing a version of the sysctl proc support that instead of using the proc generic non-caching monster, just uses the existing sysctl data structure as backing store for building the dcache entries and for doing directory reads. To use the existing data structures however I need a way to get at them. [akpm@osdl.org: warning fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
}
}
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
struct __sysctl_args tmp;
int error;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
error = deprecated_sysctl_warning(&tmp);
if (error)
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
lock_kernel();
error = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, tmp.oldlenp,
tmp.newval, tmp.newlen);
unlock_kernel();
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
out:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return error;
}
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#endif /* CONFIG_SYSCTL_SYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
[PATCH] sysctl: allow sysctl_perm to be called from outside of sysctl.c Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:11 +00:00
* sysctl_perm does NOT grant the superuser all rights automatically, because
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* some sysctl variables are readonly even to root.
*/
static int test_perm(int mode, int op)
{
if (!current->euid)
mode >>= 6;
else if (in_egroup_p(0))
mode >>= 3;
if ((mode & op & 0007) == op)
return 0;
return -EACCES;
}
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
int sysctl_perm(struct ctl_table_root *root, struct ctl_table *table, int op)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int error;
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
int mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
error = security_sysctl(table, op);
if (error)
return error;
sysctl: add the ->permissions callback on the ctl_table_root When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:44 +00:00
if (root->permissions)
mode = root->permissions(root, current->nsproxy, table);
else
mode = table->mode;
return test_perm(mode, op);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] sysctl: add a parent entry to ctl_table and set the parent entry Add a parent entry into the ctl_table so you can walk the list of parents and find the entire path to a ctl_table entry. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:13 +00:00
static void sysctl_set_parent(struct ctl_table *parent, struct ctl_table *table)
{
for (; table->ctl_name || table->procname; table++) {
table->parent = parent;
if (table->child)
sysctl_set_parent(table, table->child);
}
}
static __init int sysctl_init(void)
{
sysctl_set_parent(NULL, root_table);
sysctl: allow embedded targets to disable sysctl_check.c Disable sysctl_check.c for embedded targets. This saves about about 11 kB in .text and another 11 kB in .data on a PXA255 embedded platform. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:36 +00:00
#ifdef CONFIG_SYSCTL_SYSCALL_CHECK
{
int err;
err = sysctl_check_table(current->nsproxy, root_table);
}
#endif
[PATCH] sysctl: add a parent entry to ctl_table and set the parent entry Add a parent entry into the ctl_table so you can walk the list of parents and find the entire path to a ctl_table entry. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:34:13 +00:00
return 0;
}
core_initcall(sysctl_init);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/**
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
* __register_sysctl_paths - register a sysctl hierarchy
* @root: List of sysctl headers to register on
* @namespaces: Data to compute which lists of sysctl entries are visible
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
* @path: The path to the directory the sysctl table is in.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
* array. A completely 0 filled entry terminates the table.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
* The members of the &struct ctl_table structure are used as follows:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* ctl_name - This is the numeric sysctl value used by sysctl(2). The number
* must be unique within that level of sysctl
*
* procname - the name of the sysctl file under /proc/sys. Set to %NULL to not
* enter a sysctl file
*
* data - a pointer to data for use by proc_handler
*
* maxlen - the maximum size in bytes of the data
*
* mode - the file permissions for the /proc/sys file, and for sysctl(2)
*
* child - a pointer to the child sysctl table if this entry is a directory, or
* %NULL.
*
* proc_handler - the text handler routine (described below)
*
* strategy - the strategy routine (described below)
*
* de - for internal use by the sysctl routines
*
* extra1, extra2 - extra pointers usable by the proc handler routines
*
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories.
*
* sysctl(2) can automatically manage read and write requests through
* the sysctl table. The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
* performed, and the mode field allows minimal authentication.
*
* More sophisticated management can be enabled by the provision of a
* strategy routine with the table entry. This will be called before
* any automatic read or write of the data is performed.
*
* The strategy routine may return
*
* < 0 - Error occurred (error is passed to user process)
*
* 0 - OK - proceed with automatic read or write.
*
* > 0 - OK - read or write has been done by the strategy routine, so
* return immediately.
*
* There must be a proc_handler routine for any terminal nodes
* mirrored under /proc/sys (non-terminals are handled by a built-in
* directory handler). Several default handlers are available to
* cover common cases -
*
* proc_dostring(), proc_dointvec(), proc_dointvec_jiffies(),
* proc_dointvec_userhz_jiffies(), proc_dointvec_minmax(),
* proc_doulongvec_ms_jiffies_minmax(), proc_doulongvec_minmax()
*
* It is the handler's job to read the input buffer from user memory
* and process it. The handler should return 0 on success.
*
* This routine returns %NULL on a failure to register, and a pointer
* to the table header on success.
*/
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
struct ctl_table_header *__register_sysctl_paths(
struct ctl_table_root *root,
struct nsproxy *namespaces,
const struct ctl_path *path, struct ctl_table *table)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
struct list_head *header_list;
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
struct ctl_table_header *header;
struct ctl_table *new, **prevp;
unsigned int n, npath;
/* Count the path components */
for (npath = 0; path[npath].ctl_name || path[npath].procname; ++npath)
;
/*
* For each path component, allocate a 2-element ctl_table array.
* The first array element will be filled with the sysctl entry
* for this, the second will be the sentinel (ctl_name == 0).
*
* We allocate everything in one go so that we don't have to
* worry about freeing additional memory in unregister_sysctl_table.
*/
header = kzalloc(sizeof(struct ctl_table_header) +
(2 * npath * sizeof(struct ctl_table)), GFP_KERNEL);
if (!header)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return NULL;
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
new = (struct ctl_table *) (header + 1);
/* Now connect the dots */
prevp = &header->ctl_table;
for (n = 0; n < npath; ++n, ++path) {
/* Copy the procname */
new->procname = path->procname;
new->ctl_name = path->ctl_name;
new->mode = 0555;
*prevp = new;
prevp = &new->child;
new += 2;
}
*prevp = table;
sysctl: Remember the ctl_table we passed to register_sysctl_paths By doing this we allow users of register_sysctl_paths that build and dynamically allocate their ctl_table to be simpler. This allows them to just remember the ctl_table_header returned from register_sysctl_paths from which they can now find the ctl_table array they need to free. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:52:10 +00:00
header->ctl_table_arg = table;
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
INIT_LIST_HEAD(&header->ctl_entry);
header->used = 0;
header->unregistering = NULL;
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
header->root = root;
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
sysctl_set_parent(NULL, header->ctl_table);
sysctl: allow embedded targets to disable sysctl_check.c Disable sysctl_check.c for embedded targets. This saves about about 11 kB in .text and another 11 kB in .data on a PXA255 embedded platform. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:36 +00:00
#ifdef CONFIG_SYSCTL_SYSCALL_CHECK
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
if (sysctl_check_table(namespaces, header->ctl_table)) {
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
kfree(header);
sysctl: Error on bad sysctl tables After going through the kernels sysctl tables several times it has become clear that code review and testing is just not effective in prevent problematic sysctl tables from being used in the stable kernel. I certainly can't seem to fix the problems as fast as they are introduced. Therefore this patch adds sysctl_check_table which is called when a sysctl table is registered and checks to see if we have a problematic sysctl table. The biggest part of the code is the table of valid binary sysctl entries, but since we have frozen our set of binary sysctls this table should not need to change, and it makes it much easier to detect when someone unintentionally adds a new binary sysctl value. As best as I can determine all of the several hundred errors spewed on boot up now are legitimate. [bunk@kernel.org: kernel/sysctl_check.c must #include <linux/string.h>] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:54 +00:00
return NULL;
}
sysctl: allow embedded targets to disable sysctl_check.c Disable sysctl_check.c for embedded targets. This saves about about 11 kB in .text and another 11 kB in .data on a PXA255 embedded platform. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:36 +00:00
#endif
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
spin_lock(&sysctl_lock);
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
header_list = lookup_header_list(root, namespaces);
list_add_tail(&header->ctl_entry, header_list);
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
spin_unlock(&sysctl_lock);
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
return header;
}
sysctl: Infrastructure for per namespace sysctls This patch implements the basic infrastructure for per namespace sysctls. A list of lists of sysctl headers is added, allowing each namespace to have it's own list of sysctl headers. Each list of sysctl headers has a lookup function to find the first sysctl header in the list, allowing the lists to have a per namespace instance. register_sysct_root is added to tell sysctl.c about additional lists of sysctl_headers. As all of the users are expected to be in kernel no unregister function is provided. sysctl_head_next is updated to walk through the list of lists. __register_sysctl_paths is added to add a new sysctl table on a non-default sysctl list. The only intrusive part of this patch is propagating the information to decided which list of sysctls to use for sysctl_check_table. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:54:00 +00:00
/**
* register_sysctl_table_path - register a sysctl table hierarchy
* @path: The path to the directory the sysctl table is in.
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. A completely 0 filled entry terminates the table.
*
* See __register_sysctl_paths for more details.
*/
struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
struct ctl_table *table)
{
return __register_sysctl_paths(&sysctl_table_root, current->nsproxy,
path, table);
}
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
/**
* register_sysctl_table - register a sysctl table hierarchy
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. A completely 0 filled entry terminates the table.
*
* See register_sysctl_paths for more details.
*/
struct ctl_table_header *register_sysctl_table(struct ctl_table *table)
{
static const struct ctl_path null_path[] = { {} };
return register_sysctl_paths(null_path, table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/**
* unregister_sysctl_table - unregister a sysctl table hierarchy
* @header: the header returned from register_sysctl_table
*
* Unregisters the sysctl table and all children. proc entries may not
* actually be removed until they are no longer used by anyone.
*/
void unregister_sysctl_table(struct ctl_table_header * header)
{
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
might_sleep();
Avoid potential NULL dereference in unregister_sysctl_table register_sysctl_table() can return NULL sometimes, e.g. when kmalloc() returns NULL or when sysctl check fails. I've also noticed, that many (most?) code in the kernel doesn't check for the return value from register_sysctl_table() and later simply calls the unregister_sysctl_table() with potentially NULL argument. This is unlikely on a common kernel configuration, but in case we're dealing with modules and/or fault-injection support, there's a slight possibility of an OOPS. Changing all the users to check for return code from the registering does not look like a good solution - there are too many code doing this and failure in sysctl tables registration is not a good reason to abort module loading (in most of the cases). So I think, that we can just have this check in unregister_sysctl_table just to avoid accidental OOPS-es (actually, the unregister_sysctl_table() did exactly this, before the start_unregistering() appeared). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 07:45:24 +00:00
if (header == NULL)
return;
[PATCH] Fix sysctl unregistration oops (CVE-2005-2709) You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then wait for interface to go away, try to grab as much memory as possible in hope to hit the (kfreed) ctl_table. Then fill it with pointers to your function. Then do read from file you've opened and if you are lucky, you'll get it called as ->proc_handler() in kernel mode. So this is at least an Oops and possibly more. It does depend on an interface going away though, so less of a security risk than it would otherwise be. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 10:18:40 +00:00
spin_lock(&sysctl_lock);
start_unregistering(header);
spin_unlock(&sysctl_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kfree(header);
}
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#else /* !CONFIG_SYSCTL */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
{
return NULL;
}
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
struct ctl_table *table)
{
return NULL;
}
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
void unregister_sysctl_table(struct ctl_table_header * table)
{
}
#endif /* CONFIG_SYSCTL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* /proc/sys support
*/
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#ifdef CONFIG_PROC_SYSCTL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] make kernel/sysctl.c:_proc_do_string() static This patch makes the needlessly global _proc_do_string() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:05 +00:00
static int _proc_do_string(void* data, int maxlen, int write,
struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
size_t len;
char __user *p;
char c;
[PATCH] _proc_do_string(): fix short reads If you try to read things like /proc/sys/kernel/osrelease with single-byte reads, you get just one byte and then EOF. This is because _proc_do_string() assumes that the caller is read()ing into a buffer which is large enough to fit the whole string in a single hit. Fix. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:38 +00:00
if (!data || !maxlen || !*lenp) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*lenp = 0;
return 0;
}
[PATCH] _proc_do_string(): fix short reads If you try to read things like /proc/sys/kernel/osrelease with single-byte reads, you get just one byte and then EOF. This is because _proc_do_string() assumes that the caller is read()ing into a buffer which is large enough to fit the whole string in a single hit. Fix. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:38 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
if (get_user(c, p++))
return -EFAULT;
if (c == 0 || c == '\n')
break;
len++;
}
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
if (len >= maxlen)
len = maxlen-1;
if(copy_from_user(data, buffer, len))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
((char *) data)[len] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*ppos += *lenp;
} else {
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
len = strlen(data);
if (len > maxlen)
len = maxlen;
[PATCH] _proc_do_string(): fix short reads If you try to read things like /proc/sys/kernel/osrelease with single-byte reads, you get just one byte and then EOF. This is because _proc_do_string() assumes that the caller is read()ing into a buffer which is large enough to fit the whole string in a single hit. Fix. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:46:38 +00:00
if (*ppos > len) {
*lenp = 0;
return 0;
}
data += *ppos;
len -= *ppos;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (len > *lenp)
len = *lenp;
if (len)
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
if(copy_to_user(buffer, data, len))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
if (len < *lenp) {
if(put_user('\n', ((char __user *) buffer) + len))
return -EFAULT;
len++;
}
*lenp = len;
*ppos += len;
}
return 0;
}
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
/**
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes a string from/to the user buffer. If the kernel
* buffer provided is not large enough to hold the string, the
* string is truncated. The copied string is %NULL-terminated.
* If the string is being read by the user process, it is copied
* and a newline '\n' is added. It is truncated if the buffer is
* not large enough.
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dostring(struct ctl_table *table, int write, struct file *filp,
[PATCH] proc: sysctl: add _proc_do_string helper The logic in proc_do_string is worth re-using without passing in a ctl_table structure (say, we want to calculate a pointer and pass that in instead); pass in the two fields it uses from that structure as explicit arguments. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:04 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return _proc_do_string(table->data, table->maxlen, write, filp,
buffer, lenp, ppos);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = *negp ? -*lvalp : *lvalp;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
int write, struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
#define TMPBUFLEN 21
int *i, vleft, first=1, neg, val;
unsigned long lval;
size_t left, len;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
if (!tbl_data || !table->maxlen || !*lenp ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(*ppos && !write)) {
*lenp = 0;
return 0;
}
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
i = (int *) tbl_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
vleft = table->maxlen / sizeof(*i);
left = *lenp;
if (!conv)
conv = do_proc_dointvec_conv;
for (; left && vleft--; i++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > sizeof(buf) - 1)
len = sizeof(buf) - 1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
[PATCH] sysctl: string length calculated is wrong if it contains negative numbers In the functions do_proc_dointvec() and do_proc_doulongvec_minmax(), there seems to be a bug in string length calculation if string contains negative integer. The console log given below explains the bug. Setting negative values may not be a right thing to do for "console log level" but then the test (given below) can be used to demonstrate the bug in the code. # echo "-1 -1 -1 -123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 -1234 # # echo "-1 -1 -1 123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 1234 # (akpm: the bug is that 123456 gets truncated) It works as expected if string contains all +ve integers # echo "1 2 3 4" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk 1 2 3 4 # The patch given below fixes the issue. Signed-off-by: Praveen BP <praveenbp@ti.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:39:09 +00:00
p++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (*p < '0' || *p > '9')
break;
lval = simple_strtoul(p, &p, 0);
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if (conv(&neg, &lval, i, 1, data))
break;
} else {
p = buf;
if (!first)
*p++ = '\t';
if (conv(&neg, &lval, i, 0, data))
break;
sprintf(p, "%s%lu", neg ? "-" : "", lval);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int do_proc_dointvec(struct ctl_table *table, int write, struct file *filp,
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
return __do_proc_dointvec(table->data, table, write, filp,
buffer, lenp, ppos, conv, data);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/**
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
NULL,NULL);
}
#define OP_SET 0
#define OP_AND 1
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
#define OP_OR 2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int do_proc_dointvec_bset_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
int op = *(int *)data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
switch(op) {
case OP_SET: *valp = val; break;
case OP_AND: *valp &= val; break;
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
case OP_OR: *valp |= val; break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
/*
* Taint values can only be increased
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *filp,
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int op;
Allow reading tainted flag as user The commit 34f5a39899f3f3e815da64f48ddb72942d86c366 restricted reading of the tainted value. The attached patch changes this back to a write-only check and restores the read behaviour of older versions. Signed-off-by: Bastian Blank <bastian@waldi.eu.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-23 21:41:14 +00:00
if (write && !capable(CAP_SYS_ADMIN))
[PATCH] Add TAINT_USER and ability to set taint flags from userspace Allow taint flags to be set from userspace by writing to /proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used when userspace has potentially done something dangerous that might compromise the kernel. This will allow support personnel to ask further questions about what may have caused the user taint flag to have been set. For example, they might examine the logs of the realtime JVM to see if the Java program has used the really silly, stupid, dangerous, and completely-non-portable direct access to physical memory feature which MUST be implemented according to the Real-Time Specification for Java (RTSJ). Sigh. What were those silly people at Sun thinking? [akpm@osdl.org: build fix] [bunk@stusta.de: cleanup] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:24 +00:00
return -EPERM;
op = OP_OR;
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_bset_conv,&op);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct do_proc_dointvec_minmax_conv_param {
int *min;
int *max;
};
static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
struct do_proc_dointvec_minmax_conv_param *param = data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
if ((param->min && *param->min > val) ||
(param->max && *param->max < val))
return -EINVAL;
*valp = val;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
/**
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, &param);
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
#define TMPBUFLEN 21
unsigned long *i, *min, *max, val;
int vleft, first=1, neg;
size_t len, left;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
if (!data || !table->maxlen || !*lenp ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(*ppos && !write)) {
*lenp = 0;
return 0;
}
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
i = (unsigned long *) data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
min = (unsigned long *) table->extra1;
max = (unsigned long *) table->extra2;
vleft = table->maxlen / sizeof(unsigned long);
left = *lenp;
for (; left && vleft--; i++, min++, max++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > TMPBUFLEN-1)
len = TMPBUFLEN-1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
[PATCH] sysctl: string length calculated is wrong if it contains negative numbers In the functions do_proc_dointvec() and do_proc_doulongvec_minmax(), there seems to be a bug in string length calculation if string contains negative integer. The console log given below explains the bug. Setting negative values may not be a right thing to do for "console log level" but then the test (given below) can be used to demonstrate the bug in the code. # echo "-1 -1 -1 -123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 -1234 # # echo "-1 -1 -1 123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 1234 # (akpm: the bug is that 123456 gets truncated) It works as expected if string contains all +ve integers # echo "1 2 3 4" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk 1 2 3 4 # The patch given below fixes the issue. Signed-off-by: Praveen BP <praveenbp@ti.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:39:09 +00:00
p++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (*p < '0' || *p > '9')
break;
val = simple_strtoul(p, &p, 0) * convmul / convdiv ;
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if(neg)
continue;
if ((min && val < *min) || (max && val > *max))
continue;
*i = val;
} else {
p = buf;
if (!first)
*p++ = '\t';
sprintf(p, "%lu", convdiv * (*i) / convmul);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
[PATCH] IPC namespace - sysctls Sysctl tweaks for IPC namespace Signed-off-by: Pavel Emelianiov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:23 +00:00
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
filp, buffer, lenp, ppos, convmul, convdiv);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string. The values
* are treated as milliseconds, and converted to jiffies when they are stored.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer,
lenp, ppos, HZ, 1000l);
}
static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
[PATCH] Range checking in do_proc_dointvec_(userhz_)jiffies_conv When (integer) sysctl values are in either seconds or centiseconds, but represented internally as jiffies, the allowable value range is decreased. This patch adds range checks to the conversion routines. For values in seconds: maximum LONG_MAX / HZ. For values in centiseconds: maximum (LONG_MAX / HZ) * USER_HZ. (BTW, does anyone else feel that an interface in seconds should not be accepting negative values?) Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:50 +00:00
if (*lvalp > LONG_MAX / HZ)
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = lval / HZ;
}
return 0;
}
static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
[PATCH] Range checking in do_proc_dointvec_(userhz_)jiffies_conv When (integer) sysctl values are in either seconds or centiseconds, but represented internally as jiffies, the allowable value range is decreased. This patch adds range checks to the conversion routines. For values in seconds: maximum LONG_MAX / HZ. For values in centiseconds: maximum (LONG_MAX / HZ) * USER_HZ. (BTW, does anyone else feel that an interface in seconds should not be accepting negative values?) Signed-off-by: Bart Samwel <bart@samwel.tk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 11:15:50 +00:00
if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ)
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_clock_t(lval);
}
return 0;
}
static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = msecs_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_msecs(lval);
}
return 0;
}
/**
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in seconds, and are converted into
* jiffies.
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
/**
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
[PATCH] more kernel-doc cleanups, additions Various core kernel-doc cleanups: - add missing function parameters in ipc, irq/manage, kernel/sys, kernel/sysctl, and mm/slab; - move description to just above function for kernel_restart() Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 09:01:06 +00:00
* @ppos: pointer to the file position
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/USER_HZ seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_userhz_jiffies_conv,NULL);
}
/**
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
[PATCH] DocBook: fix some descriptions Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:26 +00:00
* @ppos: file position
* @ppos: the current position in the file
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/1000 seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
pid_t tmp;
int r;
Pidns: make full use of xxx_vnr() calls Some time ago the xxx_vnr() calls (e.g. pid_vnr or find_task_by_vpid) were _all_ converted to operate on the current pid namespace. After this each call like xxx_nr_ns(foo, current->nsproxy->pid_ns) is nothing but a xxx_vnr(foo) one. Switch all the xxx_nr_ns() callers to use the xxx_vnr() calls where appropriate. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:20 +00:00
tmp = pid_vnr(cad_pid);
[PATCH] replace cad_pid by a struct pid There are a few places in the kernel where the init task is signaled. The ctrl+alt+del sequence is one them. It kills a task, usually init, using a cached pid (cad_pid). This patch replaces the pid_t by a struct pid to avoid pid wrap around problem. The struct pid is initialized at boot time in init() and can be modified through systctl with /proc/sys/kernel/cad_pid [ I haven't found any distro using it ? ] It also introduces a small helper routine kill_cad_pid() which is used where it seemed ok to use cad_pid instead of pid 1. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:19:00 +00:00
r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
new_pid = find_get_pid(tmp);
if (!new_pid)
return -ESRCH;
put_pid(xchg(&cad_pid, new_pid));
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#else /* CONFIG_PROC_FS */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dostring(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif /* CONFIG_PROC_FS */
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#ifdef CONFIG_SYSCTL_SYSCALL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* General sysctl support routines
*/
sysctl: Factor out sysctl_data. There as been no easy way to wrap the default sysctl strategy routine except for returning 0. Which is not always what we want. The few instances I have seen that want different behaviour have written their own version of sysctl_data. While not too hard it is unnecessary code and has the potential for extra bugs. So to make these situations easier and make that part of sysctl more symetric I have factord sysctl_data out of do_sysctl_strategy and exported as a function everyone can use. Further having sysctl_data be an explicit function makes checking for badly formed sysctl tables much easier. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:23 +00:00
/* The generic sysctl data routine (used if no strategy routine supplied) */
int sysctl_data(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
size_t len;
/* Get out of I don't have a variable */
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
if (get_user(len, oldlenp))
return -EFAULT;
if (len) {
if (len > table->maxlen)
len = table->maxlen;
if (copy_to_user(oldval, table->data, len))
return -EFAULT;
if (put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
if (newlen > table->maxlen)
newlen = table->maxlen;
if (copy_from_user(table->data, newval, newlen))
return -EFAULT;
}
return 1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The generic string strategy routine: */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_string(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
sysctl: make sure to terminate strings with a NUL This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-01 01:00:29 +00:00
size_t bufsize;
if (get_user(bufsize, oldlenp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
sysctl: make sure to terminate strings with a NUL This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-01 01:00:29 +00:00
if (bufsize) {
size_t len = strlen(table->data), copied;
/* This shouldn't trigger for a well-formed sysctl */
if (len > table->maxlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
len = table->maxlen;
sysctl: make sure to terminate strings with a NUL This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-01 01:00:29 +00:00
/* Copy up to a max of bufsize-1 bytes of the string */
copied = (len >= bufsize) ? bufsize - 1 : len;
if (copy_to_user(oldval, table->data, copied) ||
put_user(0, (char __user *)(oldval + copied)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
sysctl: make sure to terminate strings with a NUL This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-01 01:00:29 +00:00
if (put_user(len, oldlenp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
}
}
if (newval && newlen) {
sysctl: make sure to terminate strings with a NUL This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-01 01:00:29 +00:00
size_t len = newlen;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (len > table->maxlen)
len = table->maxlen;
if(copy_from_user(table->data, newval, len))
return -EFAULT;
if (len == table->maxlen)
len--;
((char *) table->data)[len] = 0;
}
[PATCH] Fix false old value return of sysctl For the sysctl syscall, if the user wants to get the old value of a sysctl entry and set a new value for it in the same syscall, the old value is always overwritten by the new value if the sysctl entry is of string type and if the user sets its strategy to sysctl_string. This issue lies in the strategy being run twice if the strategy is set to sysctl_string, the general strategy sysctl_string always returns 0 if success. Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1 because they do read and write for the sysctl entry. The strategy routine sysctl_string return 0 although it actually read and write the sysctl entry. According to my analysis, if a strategy routine do read and write, it should return 1, if it just does some necessary check but not read and write, it should return 0, for example sysctl_intvec. Signed-off-by: Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-30 08:37:10 +00:00
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* This function makes sure that all of the integers in the vector
* are between the minimum and maximum values given in the arrays
* table->extra1 and table->extra2, respectively.
*/
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_intvec(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (newval && newlen) {
int __user *vec = (int __user *) newval;
int *min = (int *) table->extra1;
int *max = (int *) table->extra2;
size_t length;
int i;
if (newlen % sizeof(int) != 0)
return -EINVAL;
if (!table->extra1 && !table->extra2)
return 0;
if (newlen > table->maxlen)
newlen = table->maxlen;
length = newlen / sizeof(int);
for (i = 0; i < length; i++) {
int value;
if (get_user(value, vec + i))
return -EFAULT;
if (min && value < min[i])
return -EINVAL;
if (max && value > max[i])
return -EINVAL;
}
}
return 0;
}
/* Strategy function to convert jiffies to seconds */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_jiffies(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[PATCH] sysctl_{,ms_}jiffies: fix oldlen semantics currently it's 1) if *oldlenp == 0, don't writeback anything 2) if *oldlenp >= table->maxlen, don't writeback more than table->maxlen bytes and rewrite *oldlenp don't look at underlying type granularity 3) if 0 < *oldlenp < table->maxlen, *cough* string sysctls don't writeback more than *oldlenp bytes. OK, that's because sizeof(char) == 1 int sysctls writeback anything in (0, table->maxlen] range Though accept integers divisible by sizeof(int) for writing. sysctl_jiffies and sysctl_ms_jiffies don't writeback anything but sizeof(int), which violates 1) and 2). So, make sysctl_jiffies and sysctl_ms_jiffies accept a) *oldlenp == 0, not doing writeback b) *oldlenp >= sizeof(int), writing one integer. -EINVAL still returned for *oldlenp == 1, 2, 3. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:44:39 +00:00
if (oldval && oldlenp) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
size_t olen;
[PATCH] sysctl_{,ms_}jiffies: fix oldlen semantics currently it's 1) if *oldlenp == 0, don't writeback anything 2) if *oldlenp >= table->maxlen, don't writeback more than table->maxlen bytes and rewrite *oldlenp don't look at underlying type granularity 3) if 0 < *oldlenp < table->maxlen, *cough* string sysctls don't writeback more than *oldlenp bytes. OK, that's because sizeof(char) == 1 int sysctls writeback anything in (0, table->maxlen] range Though accept integers divisible by sizeof(int) for writing. sysctl_jiffies and sysctl_ms_jiffies don't writeback anything but sizeof(int), which violates 1) and 2). So, make sysctl_jiffies and sysctl_ms_jiffies accept a) *oldlenp == 0, not doing writeback b) *oldlenp >= sizeof(int), writing one integer. -EINVAL still returned for *oldlenp == 1, 2, 3. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:44:39 +00:00
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = *(int *)(table->data) / HZ;
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = new*HZ;
}
return 1;
}
/* Strategy function to convert jiffies to seconds */
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_ms_jiffies(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[PATCH] sysctl_{,ms_}jiffies: fix oldlen semantics currently it's 1) if *oldlenp == 0, don't writeback anything 2) if *oldlenp >= table->maxlen, don't writeback more than table->maxlen bytes and rewrite *oldlenp don't look at underlying type granularity 3) if 0 < *oldlenp < table->maxlen, *cough* string sysctls don't writeback more than *oldlenp bytes. OK, that's because sizeof(char) == 1 int sysctls writeback anything in (0, table->maxlen] range Though accept integers divisible by sizeof(int) for writing. sysctl_jiffies and sysctl_ms_jiffies don't writeback anything but sizeof(int), which violates 1) and 2). So, make sysctl_jiffies and sysctl_ms_jiffies accept a) *oldlenp == 0, not doing writeback b) *oldlenp >= sizeof(int), writing one integer. -EINVAL still returned for *oldlenp == 1, 2, 3. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:44:39 +00:00
if (oldval && oldlenp) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
size_t olen;
[PATCH] sysctl_{,ms_}jiffies: fix oldlen semantics currently it's 1) if *oldlenp == 0, don't writeback anything 2) if *oldlenp >= table->maxlen, don't writeback more than table->maxlen bytes and rewrite *oldlenp don't look at underlying type granularity 3) if 0 < *oldlenp < table->maxlen, *cough* string sysctls don't writeback more than *oldlenp bytes. OK, that's because sizeof(char) == 1 int sysctls writeback anything in (0, table->maxlen] range Though accept integers divisible by sizeof(int) for writing. sysctl_jiffies and sysctl_ms_jiffies don't writeback anything but sizeof(int), which violates 1) and 2). So, make sysctl_jiffies and sysctl_ms_jiffies accept a) *oldlenp == 0, not doing writeback b) *oldlenp >= sizeof(int), writing one integer. -EINVAL still returned for *oldlenp == 1, 2, 3. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:44:39 +00:00
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = jiffies_to_msecs(*(int *)(table->data));
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = msecs_to_jiffies(new);
}
return 1;
}
[PATCH] sysctl: implement sysctl_uts_string() The problem: When using sys_sysctl we don't read the proper values for the variables exported from the uts namespace, nor do we do the proper locking. This patch introduces sysctl_uts_string which properly fetches the values and does the proper locking. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:39:55 +00:00
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#else /* CONFIG_SYSCTL_SYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
[PATCH] Improve the removed sysctl warnings Don't warn about libpthread's access to kernel.version. When it receives -ENOSYS it will read /proc/sys/kernel/version. If anything else shows up print the sysctl number string. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Cal Peake <cp@absolutedigital.net> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06 07:52:11 +00:00
struct __sysctl_args tmp;
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
int error;
[PATCH] Improve the removed sysctl warnings Don't warn about libpthread's access to kernel.version. When it receives -ENOSYS it will read /proc/sys/kernel/version. If anything else shows up print the sysctl number string. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Cal Peake <cp@absolutedigital.net> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06 07:52:11 +00:00
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
error = deprecated_sysctl_warning(&tmp);
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
/* If no error reading the parameters then just -ENOSYS ... */
if (!error)
error = -ENOSYS;
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
sysctl: Factor out sysctl_data. There as been no easy way to wrap the default sysctl strategy routine except for returning 0. Which is not always what we want. The few instances I have seen that want different behaviour have written their own version of sysctl_data. While not too hard it is unnecessary code and has the potential for extra bugs. So to make these situations easier and make that part of sysctl more symetric I have factord sysctl_data out of do_sysctl_strategy and exported as a function everyone can use. Further having sysctl_data be an explicit function makes checking for badly formed sysctl tables much easier. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:23 +00:00
int sysctl_data(struct ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_string(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_intvec(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_jiffies(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
return -ENOSYS;
}
sysctl core: Stop using the unnecessary ctl_table typedef In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't needed and is a bit of a nuisance because it makes it harder to recognize ctl_table is a type name. So this patch removes it from the generic sysctl code. Hopefully I will have enough energy to send the rest of my patches will follow and to remove it from the rest of the kernel. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:22 +00:00
int sysctl_ms_jiffies(struct ctl_table *table, int __user *name, int nlen,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void __user *oldval, size_t __user *oldlenp,
[PATCH] sysctl: remove unused "context" param Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:19:10 +00:00
void __user *newval, size_t newlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
return -ENOSYS;
}
[PATCH] sysctl: Allow /proc/sys without sys_sysctl Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:51:04 +00:00
#endif /* CONFIG_SYSCTL_SYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
static int deprecated_sysctl_warning(struct __sysctl_args *args)
{
static int msg_count;
int name[CTL_MAXNAME];
int i;
sysctl: check length at deprecated_sysctl_warning Original patch assumed args->nlen < CTL_MAXNAME, but it can be false. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15 00:58:38 +00:00
/* Check args->nlen. */
if (args->nlen < 0 || args->nlen > CTL_MAXNAME)
return -ENOTDIR;
sysctl: deprecate sys_sysctl in a user space visible fashion. After adding checking to register_sysctl_table and finding a whole new set of bugs. Missed by countless code reviews and testers I have finally lost patience with the binary sysctl interface. The binary sysctl interface has been sort of deprecated for years and finding a user space program that uses the syscall is more difficult then finding a needle in a haystack. Problems continue to crop up, with the in kernel implementation. So since supporting something that no one uses is silly, deprecate sys_sysctl with a sufficient grace period and notice that the handful of user space applications that care can be fixed or replaced. The /proc/sys sysctl interface that people use will continue to be supported indefinitely. This patch moves the tested warning about sysctls from the path where sys_sysctl to a separate path called from both implementations of sys_sysctl, and it adds a proper entry into Documentation/feature-removal-schedule. Allowing us to revisit this in a couple years time and actually kill sys_sysctl. [lethal@linux-sh.org: sysctl: Fix syscall disabled build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:58 +00:00
/* Read in the sysctl name for better debug message logging */
for (i = 0; i < args->nlen; i++)
if (get_user(name[i], args->name + i))
return -EFAULT;
/* Ignore accesses to kernel.version */
if ((args->nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
return 0;
if (msg_count < 5) {
msg_count++;
printk(KERN_INFO
"warning: process `%s' used the deprecated sysctl "
"system call with ", current->comm);
for (i = 0; i < args->nlen; i++)
printk("%d.", name[i]);
printk("\n");
}
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* No sense putting this after each symbol definition, twice,
* exception granted :-)
*/
EXPORT_SYMBOL(proc_dointvec);
EXPORT_SYMBOL(proc_dointvec_jiffies);
EXPORT_SYMBOL(proc_dointvec_minmax);
EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
EXPORT_SYMBOL(proc_dostring);
EXPORT_SYMBOL(proc_doulongvec_minmax);
EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
EXPORT_SYMBOL(register_sysctl_table);
sysctl: Add register_sysctl_paths function There are a number of modules that register a sysctl table somewhere deeply nested in the sysctl hierarchy, such as fs/nfs, fs/xfs, dev/cdrom, etc. They all specify several dummy ctl_tables for the path name. This patch implements register_sysctl_path that takes an additional path name, and makes up dummy sysctl nodes for each component. This patch was originally written by Olaf Kirch and brought to my attention and reworked some by Olaf Hering. I have changed a few additional things so the bugs are mine. After converting all of the easy callers Olaf Hering observed allyesconfig ARCH=i386, the patch reduces the final binary size by 9369 bytes. .text +897 .data -7008 text data bss dec hex filename 26959310 4045899 4718592 35723801 2211a19 ../vmlinux-vanilla 26960207 4038891 4718592 35717690 221023a ../O-allyesconfig/vmlinux So this change is both a space savings and a code simplification. CC: Olaf Kirch <okir@suse.de> CC: Olaf Hering <olaf@aepfle.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 12:50:18 +00:00
EXPORT_SYMBOL(register_sysctl_paths);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(sysctl_intvec);
EXPORT_SYMBOL(sysctl_jiffies);
EXPORT_SYMBOL(sysctl_ms_jiffies);
EXPORT_SYMBOL(sysctl_string);
sysctl: Factor out sysctl_data. There as been no easy way to wrap the default sysctl strategy routine except for returning 0. Which is not always what we want. The few instances I have seen that want different behaviour have written their own version of sysctl_data. While not too hard it is unnecessary code and has the potential for extra bugs. So to make these situations easier and make that part of sysctl more symetric I have factord sysctl_data out of do_sysctl_strategy and exported as a function everyone can use. Further having sysctl_data be an explicit function makes checking for badly formed sysctl tables much easier. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 10:05:23 +00:00
EXPORT_SYMBOL(sysctl_data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(unregister_sysctl_table);