ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
f469879ed0
SDR: Use filter to remove harmonics caused by downsampling/upsampling
...
This drastically increases the signal-noise-ratio and removes co-channel
interferences. It gains CPU usage, but only on SDR threads, not on the
main thread.
2017-09-24 15:59:24 +02:00
9205767f94
SDR: Display spectrum graph together with channel numbers and position
2017-09-02 15:41:11 +02:00
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
05c516ca16
SDR: Fixed stack overflow by allocating memory instead of local buffers
2017-09-01 18:42:52 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
ea7cbb8675
SDR: Add option to enable TX timestamps on UHD devices (disabled by default)
2017-08-16 18:51:47 +02:00
42a87c1c2f
SDR: Name SDR TX and RX threads
2017-08-16 18:51:46 +02:00
3afcac8342
SDR: Add option to swap RX and TX frequencies (for testing)
2017-08-10 17:42:54 +02:00
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
92ce6d4a42
SDR: Using threads for read and write when doing resampling
2017-08-08 12:53:02 +02:00
fda224c27f
Fixing and improving SDR support (SoapySDR and UHD)
...
- Soapy SDR now works.
- Channels can be selected.
- Antennas can be listed and selected.
- Device args, tune args, stream args can be specified.
2017-07-15 12:45:19 +02:00
329463bb8c
SDR: Add option to give channel number
...
Using SoapySDR server allows to run different networks on multi channel
SDR devices.
2017-06-10 13:08:25 +02:00
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
fbdb9ece01
SDR: Allow direct IQ TX and RX instead of fm modulating a list of channels
...
This is performed by reading and writing IQ data to "sample" pointer with
channel number set to 0.
2017-05-15 21:46:29 +02:00
65694f3b80
SDR: disable TX or RX by setting TX or RX frequency to 0
...
This way it is possible to use SDR simplex
2017-05-15 21:46:29 +02:00
9dda9e1efc
SDR: Add option to set IF bandwidth. If not defined, sampling rate is used.
2017-05-15 21:46:27 +02:00
1445ca2fac
SDR: Add option to send (previously recorded) IQ data instead of TX data
2017-05-15 21:46:26 +02:00
4201717f36
Rework on audio buffer management
...
Use function to get samples to be sent to fill audio buffers to a
level. This replaces the function that only shows how much data
is in the buffer.
This way the function itself can control how much data will be
sent.
2017-03-04 06:35:38 +01:00
2e1999b1ee
Start streaming of sound/SDR just before main loop
...
This prevents buffer overflow during init/creation processes
2017-02-25 07:09:53 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
290b365d67
SDR: Move FM modulation algorithms to a seperate file
2017-02-18 21:02:51 +01:00
47f74b38ce
SDR transmits with full amplitude
2017-02-18 21:02:50 +01:00
6a3cfd608e
Add ascii-art spectrum analyzer for SDR support
2017-02-18 21:02:49 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
ac0da3f76e
Filter improvement: LP and HP filters, added test function
...
The -3 dB level at cut-off frequency is now maintained for multiple
iterations.
2017-02-18 21:01:04 +01:00
19b396ab4d
Wave recording and playback now uses multi channels
2017-02-18 21:00:59 +01:00
272ebeb0ae
SDR: Minor fixes
2017-02-18 21:00:56 +01:00
d28467c125
SDR: Display IQ data as a plot using 'q' key
2017-02-18 21:00:53 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
b30b61282c
Generic SDR support
2017-02-18 21:00:48 +01:00
Andreas Eversberg