Andreas Eversberg
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
Andreas Eversberg
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
Andreas Eversberg
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
Andreas Eversberg
f7476bce41
NMT-900: Handle channels >= 1025 correctly
2017-10-22 19:23:04 +02:00
Andreas Eversberg
3218d1a8e0
NMT: Fixed segfault when decoding certain (invalid) messages
2017-10-22 19:23:03 +02:00
Andreas Eversberg
595fd845e0
NMT: Removed double implementation of caller ID encoding
2017-10-12 19:46:32 +02:00
Andreas Eversberg
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
Andreas Eversberg
e84d7a082c
Use braces to make GCC happy
2017-10-02 12:34:38 +02:00
Andreas Eversberg
b6468b585d
NMT: Minor fixes on frame data
2017-09-22 16:51:47 +02:00
Andreas Eversberg
5b1956fe49
Move sms and dms code (NMT) to separate lib.a
2017-09-11 20:37:03 +02:00
Andreas Eversberg
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
Andreas Eversberg
cff7622f5c
Move mobile phone specific code from libcommon.a to libmobile.a
2017-09-01 18:42:49 +02:00
Andreas Eversberg
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
Andreas Eversberg
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
Andreas Eversberg
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
Andreas Eversberg
7c9ce960d7
Fixes of checking digits
2017-08-08 12:54:21 +02:00
Andreas Eversberg
0cbd9657d2
Move Hagelbarger error correction code from NMT to common code
...
It will be used by Radiocom 2000 also.
Some minor fixes and improvements apply.
2017-08-08 12:53:48 +02:00
Andreas Eversberg
6c64025717
Move FFSK modem from NMT to common code, so it can be used by other networks
2017-08-08 12:53:34 +02:00
Andreas Eversberg
3274812eab
NMT-900 System implementation
...
NMT can now be run as 450 or 900 Network.
2017-08-08 12:52:45 +02:00
Andreas Eversberg
0c9de251be
NMT: Implement Hagelbarger Code
...
This will correct burst errors of received messages. If the message
is too corrupted, it will be ignored, because some element may not
match then. The digits and line signals are checked for consistency,
since they are repeated serveral times in a message.
2017-08-08 12:52:29 +02:00
Andreas Eversberg
cd9cb9a107
Minor fix for NMT debug output
2017-07-15 12:45:20 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
557d19de66
NMT: Show trafic areas in hex and allow to select unsupported areas
2017-07-15 07:38:14 +02:00
Andreas Eversberg
3774519631
NMT: Fixed "use after free" bug
2017-07-15 07:38:13 +02:00
Andreas Eversberg
7af886c600
NMT: Fixed NMT digit decoding
2017-07-15 07:38:13 +02:00
Andreas Eversberg
d52f4cd29d
NMT: Mark Benelux and Czech/Slovak networks as tested
...
I have tested the network with B/NL/L and CZ/SK phones, and they work!
2017-06-15 18:28:26 +02:00
Andreas Eversberg
1aebedc66a
NMT: Fixed line signal description
2017-06-11 09:01:21 +02:00
Andreas Eversberg
7a9762e28e
NMT: Disable Supervisory signal during DMS (SMS) transfer and use Timeout
...
There is no Supervisory signal during DMS transfer, so there must be
no timeout for Supervisory signal. Instead, the SMS layer will timeout
after some seconds without receiving data.
2017-06-11 08:13:52 +02:00
Andreas Eversberg
19afb792b5
NMT: Fix and adjustements to supervisory signal detection
2017-06-10 17:11:47 +02:00
Andreas Eversberg
50b2021d21
NMT 450: Support for other European counties, like Belgium, Czech, Slovakia
2017-06-10 13:08:51 +02:00
Andreas Eversberg
e653475ff7
NMT: Allow NULL (B'0000') to be used as country selector in traffic area
2017-06-10 13:08:23 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
Andreas Eversberg
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
Andreas Eversberg
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
Andreas Eversberg
f72c53757d
B-Netz, NMT: Improved check for minimum required sample rate
2017-02-18 21:01:15 +01:00
Andreas Eversberg
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
Andreas Eversberg
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
Andreas Eversberg
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
Andreas Eversberg
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
Andreas Eversberg
bc028cd4d3
NMT: Make supervisory signal default, also allow setting per channel.
2017-02-18 21:00:57 +01:00
Andreas Eversberg
a5fd375237
Fixed typos
2017-02-18 21:00:55 +01:00
Andreas Eversberg
fee4846c3f
SDR forces default settings: emphasis and FSK polarity
2017-02-18 21:00:52 +01:00
Andreas Eversberg
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
Andreas Eversberg
57993e3e48
Support for UHD SDR interface
2017-02-18 21:00:49 +01:00
Andreas Eversberg
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
Andreas Eversberg
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
Andreas Eversberg
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
Andreas Eversberg
d447be5e26
NMT: Rework on FSK process, no more requirement for special sample rates
2017-01-07 06:28:20 +01:00