ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
975e34211b
Call control: Minor logging fixes
2017-10-22 19:23:02 +02:00
1a4a08386c
Only dial if call is on-hook or disconnected
2017-10-02 12:34:34 +02:00
08dd180ea0
Add echo test feature to check mobile phone's mic + speaker
...
Add '-e' to command line option, but do not select MNCC nor call device
2017-09-21 20:29:30 +02:00
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
8e0d7d2513
samplerate.c: Allow transcoding to lower sample rate other than 8000 Hz
2017-03-04 16:52:20 +01:00
4201717f36
Rework on audio buffer management
...
Use function to get samples to be sent to fill audio buffers to a
level. This replaces the function that only shows how much data
is in the buffer.
This way the function itself can control how much data will be
sent.
2017-03-04 06:35:38 +01:00
2e1999b1ee
Start streaming of sound/SDR just before main loop
...
This prevents buffer overflow during init/creation processes
2017-02-25 07:09:53 +01:00
5026e161aa
Open audio device for call (headset) after everything is prepared
...
It is not allowed to stall after trigger reading of audio device.
2017-02-18 21:01:18 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
d47853201c
common code: Update call console only when it changes or after debug line
2016-12-11 14:21:22 +01:00
d52d0242bf
Output enhancements
...
* no more flicker on wave form display while scrolling
* dialing console gets cleared/overwritten correctly
* fixes on stderr output
2016-11-29 07:49:21 +01:00
4dacec9ceb
A-Netz: Use Operator number 010 when calling from mobile station
...
Also use no caller ID (NULL). The call control code processes the
caller ID and dialed number correctly.
2016-11-13 06:04:54 +01:00
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
541eafe59e
Common code: Add call state debugging
2016-08-07 17:23:56 +02:00
e69d74ac45
Send test tone towards mobile when no headphone sound device is selected
2016-08-03 12:03:55 +02:00
0593f7d066
Fix typos
2016-07-24 12:31:09 +02:00
c273bbc5ff
Remove console line before printing debugging and on exit
2016-07-24 12:31:08 +02:00
5807a49f49
Release active call, when disconnect is received from network
...
If early disconnect is received, the connecion is kept established, so the
announcement can be heared by mobile subscriber.
2016-07-24 12:31:08 +02:00
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
62b3712ce5
common code: Check and ignore events without callref set
2016-07-09 11:27:02 +02:00
d851c37eac
common code: Release MNCC call 30 seconds after listening to announcement
2016-06-19 17:46:56 +02:00
d2c4ca4fa9
Implementation of Advanced Mobile Phone Service (AMPS)
2016-06-17 17:03:29 +02:00
7d5d3da8d3
Add function to display wave form from input/loop
...
Use 'w' to toggle display.
Move terminal input processing and main loop to main_common.c
2016-06-17 17:03:28 +02:00
1d20119d85
common code: Call control allows to re-dial after disconnect
...
No hangup key required before that anymore.
2016-06-12 16:16:37 +02:00
7434e21dc2
Multi transceiver support
...
This can be multiple transceivers on multiple sound cards.
Two transceivers can be bundled on one sound device as well, using both channels.
2016-05-08 15:48:13 +02:00
9de121109d
common code: Sample rate conversion now supports any rate above 8000 Hz
2016-04-17 16:49:39 +02:00
0dc81fe210
Prepare for NMT: Fixes and improvements at common code
2016-03-13 09:12:23 +01:00
946c9ce10a
initial git import
2016-03-13 09:12:11 +01:00
Andreas Eversberg