53814241b3
AMPS: Note about future callref handling
2016-08-03 12:03:53 +02:00
f15c0dfea3
NMT: Fixing audio level of supervisory signal to match 0.3 KHz deviation
2016-08-03 12:03:52 +02:00
55229a397c
NMT: Fix, stop ringing timer at answer
2016-08-03 12:03:52 +02:00
28ae3e300f
NMT: Fixed multi-transceiver mode and show channel in various logs
2016-08-03 12:03:51 +02:00
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
c9012c7663
C-Netz: Release MT call, if mobile phone does not respond
2016-08-02 09:02:58 +02:00
eb85afa49c
C-Netz: Use cosine-square ramp for better signal generation
2016-08-02 07:39:02 +02:00
ce7a98206a
C-Netz: Move callref to transaction. Callref on SpK only when its busy.
...
Only when busy, the channel has callref. This is required for audio
routing. During setup, the callref assigned to transaction and kept
there until release to/from upper layer.
2016-08-01 19:17:13 +02:00
1a3e536010
AMPS: Fix transaction list corruption
2016-08-01 13:06:03 +02:00
664f8c7ac0
C-Netz: retry call setup messages up to 3 times
2016-08-01 12:15:12 +02:00
b84a64f872
C-Netz: Autoselect polarity on all transceivers
2016-08-01 12:15:09 +02:00
77cd21e7c2
C-Netz: Fix transaction list corruption
2016-08-01 12:15:08 +02:00
0bc5ee553c
NMT: Fix SMS cleanup
2016-07-31 18:52:31 +02:00
cc8631d4f9
NMT: Give warning of missing channel type AFTER creating all channels
2016-07-31 18:48:20 +02:00
f729b32745
C-Netz: Fixed multi-transceiver mode and show channel in various logs
2016-07-31 18:48:19 +02:00
eb8a22e2c2
NMT: Fix SMS deliver output message
2016-07-31 14:49:43 +02:00
bda55ca205
work on docs
2016-07-31 14:48:56 +02:00
0593f7d066
Fix typos
2016-07-24 12:31:09 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
c273bbc5ff
Remove console line before printing debugging and on exit
2016-07-24 12:31:08 +02:00
123979a0f3
NMT: Minor fix at debug output
2016-07-24 12:31:08 +02:00
8741833948
NMT: Change 'index' of message to 'mt' (message type)
2016-07-24 12:31:08 +02:00
5807a49f49
Release active call, when disconnect is received from network
...
If early disconnect is received, the connecion is kept established, so the
announcement can be heared by mobile subscriber.
2016-07-24 12:31:08 +02:00
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
ba8bf0e9d5
NMT: Fix autoanswer
...
If phone does not support autoanswer, the MTX proceeds with regular ringing.
2016-07-24 12:31:07 +02:00
efb50532c6
NMT: Rework on frame (message) types
2016-07-24 12:31:07 +02:00
8906deb5dd
B-Netz: Added description for GFS 19 to reduce transmit power
2016-07-24 12:31:07 +02:00
5bbbe11666
B-Netz: Rework on dialing start digit: New unknown type added
2016-07-24 12:31:06 +02:00
ce86f62b11
work on docs
2016-07-24 12:31:06 +02:00
b3b42e8bc4
Cleanup warnings at autoconfig files
2016-07-24 12:31:06 +02:00
a6bd841247
NMT: Various fixes for SMS support
2016-07-24 12:31:05 +02:00
3ef9ef88bd
B-Netz: Compiler switch to generate a dial sequence (for testing)
2016-07-24 12:30:56 +02:00
2137db0e01
NMT: Autoanswer for SMS/DMS calls
2016-07-09 15:16:17 +02:00
e7fa08b6df
NMT / SMS: Short Message Service support
2016-07-09 15:16:16 +02:00
64c829909b
NMT / DMS: User data facility support (required for SMS)
2016-07-09 11:27:24 +02:00
62b3712ce5
common code: Check and ignore events without callref set
2016-07-09 11:27:02 +02:00
f39ee2f15a
common code: Add support for main loop handler
2016-07-09 11:27:02 +02:00
26ab26db48
minor fix at MNCC socket
2016-07-09 11:27:02 +02:00
44ebf1616a
work on docs
2016-07-07 16:25:55 +02:00
ab9aba1a84
B-Netz: Reply the station ID correctly
...
It must be replied right after it has been received the first time.
It does not matter if this happens a bit later, even a second later.
Thanx to Hans Wigger for providing recording from his B-Netz tester to
figure this out.
2016-07-06 16:19:01 +02:00
54266a9937
Minor fixup to .gitignore: ignore test_compandor
2016-07-06 16:18:51 +02:00
f3fd01ebcd
ALSA code: Fixed corrupted sample at the end of a read
...
The last sample may get corrupted. It seems that this depends on the
card that is used. To fix this, the snd_pcm_avail is checked and
one sample less than available is read using snd_pcm_readi. This
sample remains in RX buffer until next read. Then it is not corrupted.
2016-07-02 08:04:43 +02:00
4719be95bd
work on docs
2016-07-02 08:01:34 +02:00
2ee51022f4
Rename 'compander' to 'compandor'
2016-06-20 19:37:56 +02:00
86daa5a64a
AMPS: Add option to use the BUSY/IDLE bit on FOCC
2016-06-20 17:16:46 +02:00
76f6285846
AMPS: Show round trip delay of Filler frames in loopback mode
2016-06-20 17:15:42 +02:00
d851c37eac
common code: Release MNCC call 30 seconds after listening to announcement
2016-06-19 17:46:56 +02:00
b45b0c6bac
common code: Minor fix in main loop
2016-06-19 17:43:48 +02:00
f87e36fa47
AMPS: Detect difference between paging response and call response
...
Release call, if paging response was received, after call from fixed
network has already been released.
2016-06-19 17:41:42 +02:00
2b61a2ca4a
Work on docs
2016-06-19 11:09:03 +02:00
Andreas Eversberg