7cd3f85294
C-Netz: Show debugging for IDLE (LR and LMR) frames
...
Suppress repeated IDLE frame
2022-06-19 06:51:38 +02:00
ec286f3d94
C-Netz: Add options to change 'Meldeaufruf' timer and counter.
2022-06-19 06:51:35 +02:00
cb9c85adb5
C-Netz: Add capability of special tunnel base station (bahn-bs)
...
Totally useless, if you don't have a train phone - don't you?
2022-06-19 06:51:33 +02:00
26f4b3f711
C-Netz: Cleanup OgK slot allocation and polarity detection
...
Now you can select between 1 and 8 slots per frame.
2022-06-19 06:51:30 +02:00
4930da8e0c
C-Netz: Add capability of non-standard OgK channel(s)
2022-06-19 06:51:28 +02:00
423bc42429
Refactoring validity check and prefix processing of dialed number
...
Command line help shows how many digits and what prefixes can be dialed.
Giving a station ID via command line will be checked for being valid.
The number to call the mobile statione will be checked for being valid.
Prefixes that are defined for a nework will be removed from station ID
automatically.
Multiple station ID lengths are supported:
* C-Netz: 7 or 8 digits, depending on area code length
* A-Netz: 5 or 7 digits; number is truncated to last 5 digits.
* IMTS/MTS: 5 or 7 digits, depending on phone's selector switch.
2021-11-07 20:00:42 +01:00
6fa74a1296
Refactor global variables for signal processing
...
These are:
device, sample rate, buffer, latency
Called now:
dsp_device, dsp_samplerate, dsp_buffer, dsp_latency
Call audio device:
call_device, call_samplerate, call_buffer
2021-10-24 06:25:10 +02:00
3293dfb500
C-Netz: Fix calls to 8-digits subscriber numbers
2021-09-17 16:16:20 +02:00
3fce0403fd
C-Netz: Updated base station list
2021-09-17 16:16:10 +02:00
Martin Hauke
a07764f0d9
Fixed typos in cli output and source code comments
2021-01-03 09:57:03 +01:00
2cb2d5f3ac
Replaced MNCC by OSMO-CC
2020-12-29 11:11:41 +01:00
118b0260bc
C-Netz: Fix scheduling of frames when there is nothing to send
2020-12-21 08:38:44 +01:00
ed72e29dbb
Add tx-gain option
2020-10-29 07:39:27 +01:00
f468b2dd9f
C-Netz: Minor fixes
2020-10-29 07:36:14 +01:00
7189984bbb
C-Netz: At correct timeslot switch channel mode
...
Without this, the first BQ(K) message came to early, so that BSA 51
released when receiving ZFZ(K) one frame too early.
2020-10-29 07:35:50 +01:00
63a2bc8a6b
C-Netz: Allow dialing 8-digit numbers (FuVSt > 9)
2020-05-23 14:25:34 +02:00
89602822e6
C-Netz: Correct check for valid channel numbers
2020-02-18 19:03:03 +01:00
f132059edf
Add clock function to call interface
...
Implementations will have a clock to play tones, if no clock is
available from a transceiver.
2020-01-12 11:17:58 +01:00
570b2a5bca
C-Netz: Added new list of base station names and IDs
...
List contains 1991 and 1999 bwase stations
2020-01-04 09:22:02 +01:00
4cd9cb787e
C-Netz: --ms-power defines power level (not P-bits)
...
Also the level 8 can be selected. Actually level 6 is selected, but
reduced to 8 when making a call.
2020-01-02 09:45:33 +01:00
c2f14834e5
Rename dbm0 (level) to speech (level)
...
In mobile communications we use speech level instead of milliwatts.
The deviation (FM) is always based on speech level, not on 1 milliwatt.
2019-12-08 17:24:36 +01:00
360729d270
C-Netz: Added list of base station names and IDs
...
Automatic polarity detection is now done by using the polarity of last
transmitted message. We cannot use two base station IDs anymore, to
detect the polarity. Now we deal only with the defined base station ID.
2019-11-29 15:58:32 +01:00
008bca784b
C-Netz: Show if emergency call is made
2019-11-29 15:58:32 +01:00
6dd9999dc8
C-Netz: Fixup for broken Authentication patch
...
MT calls did not work.
2019-10-26 16:57:01 +02:00
d6579c1244
Allow giving alphanumeric channels (Prepare for IMTS)
2019-08-26 21:10:20 +02:00
Martin Hauke
75765d49b7
Fixed many typos in output and source code comments
2019-07-15 21:14:52 +02:00
13245c56f6
C-Netz: Add authentication support (process only)
...
No real authentication, since the algorithm and the keys inside the cards
are not known. A challenge can be specified and optionally the response
can be verified.
2019-06-30 14:51:01 +02:00
1321f66456
C-Netz: Add option to control voice deviation
2019-01-02 15:58:34 +01:00
40aec4f14c
C-Netz: Swtitch speech scrambler only after receiving 3 consecutive frames with different scrambler mode
2018-07-01 09:18:07 +02:00
3a5fa8837c
Improved emphasis
2018-02-16 15:54:39 +01:00
1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
7b539d5dc7
Restructure: Move mncc from common code to 'libmncc'
2017-11-25 19:28:33 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
dfdad21e3f
C-Netz: Work on system informations, metering and call queues
...
- Make system informations configurable
- Simulate call mertering
- Support for call queues on busy voice channels
2017-09-01 18:42:51 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
76a3484c5c
C-Netz: Make demodulation algorithm (slope or leve) slectable via option
...
By default (auto), the algorithm is selected, depending on sound card
or SDR usage. For testing and debugging purpose, the algorithm can be
forced.
2017-05-19 19:11:59 +02:00
ef7ff26793
C-Netz: SDR now uses zero-crossing to detect level changes.
...
This does not work with analog radio, but with SDR it works.
The quality should be better and the process is faster.
2017-05-17 20:06:46 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
3fb2ade352
C-Netz: Fix release of call process when no dialing was received from phone
2017-02-18 21:02:48 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
8cb0187133
C-Netz: Remove the obviously useless noise function for unused timeslots
2017-02-18 21:01:17 +01:00
71e556e7ff
Work on emphasis filter: Neutral @ 1000 Hz; Use filter before de-emphasis
2017-02-18 21:01:11 +01:00
Andreas Eversberg
Martin Hauke