7c9ce960d7
Fixes of checking digits
2017-08-08 12:54:21 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
bf0abd627d
A-Netz: Option to set gain of paging tones
2017-02-18 21:00:54 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
57993e3e48
Support for UHD SDR interface
2017-02-18 21:00:49 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
16e1e842b9
A-Netz: Don't allow emphasis, since it is not used with A-Netz
2017-01-02 10:16:49 +01:00
e724823c5b
A-Netz: Reset tone detector when going idle
...
A pending tone must be detected as soon as the cell is idle. This happens
if the phone picks up during release guard time.
2017-01-02 10:13:43 +01:00
3400f555fe
Add common function to give hotkey help
...
* Key to dial and hangup
* Key to display wave form
2016-12-09 16:42:38 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
f111c50478
A-Netz / B-Netz: Add function to change state, debug with channel info
...
Change state uses a function rather than directly setting state
variable.
Some debug commands now use channel number. (for multi-trx setups)
2016-12-06 17:47:58 +01:00
Andreas Eversberg
0b43b63d1f
Fixed command line option descriptions
2016-11-29 10:59:09 +01:00
d52d0242bf
Output enhancements
...
* no more flicker on wave form display while scrolling
* dialing console gets cleared/overwritten correctly
* fixes on stderr output
2016-11-29 07:49:21 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
Andreas Eversberg
481181fa74
A-Netz: Click removal when changing sequenced paging tones
...
When tone changes to next tone, a transition of 2ms is performed. The last
tone is faded out and the new tone faded in.
2016-11-14 18:36:50 +01:00
2a4abc62b2
Move realtime scheduling and signal handling to common code
2016-11-13 06:37:56 +01:00
4dacec9ceb
A-Netz: Use Operator number 010 when calling from mobile station
...
Also use no caller ID (NULL). The call control code processes the
caller ID and dialed number correctly.
2016-11-13 06:04:54 +01:00
52b1ac65f4
A-Netz: Keep phase for each paging tone when played in sequence
...
If paging tones are played in sequence, only one tone out of four tones
is played at once. The phase of all tones are calculated as if each tone
would have been sent permanently.
2016-11-13 06:00:24 +01:00
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
0cec2f28be
Add check if fromat at PDEBUG() is consistent (like printf)
...
The bugs it found are fixed too.
2016-10-07 07:52:17 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
0593f7d066
Fix typos
2016-07-24 12:31:09 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
f39ee2f15a
common code: Add support for main loop handler
2016-07-09 11:27:02 +02:00
4d52f955b3
common code: Add processing interval option to decrese CPU usage
2016-06-18 19:33:08 +02:00
c933250685
Add dsp mode change fuction to A and B Netz, fixed NMT
2016-06-12 16:11:20 +02:00
1ceb3026dd
Fixed link problem with alsa lib
...
Thanx to Martin for pointing to this problem.
2016-05-16 18:41:21 +02:00
021c34a899
Add geo locations of A-Netz and B-Netz towers. (not exact location)
2016-05-08 16:11:13 +02:00
bae12156a2
common code: Add input gain option
2016-05-08 15:49:45 +02:00
7434e21dc2
Multi transceiver support
...
This can be multiple transceivers on multiple sound cards.
Two transceivers can be bundled on one sound device as well, using both channels.
2016-05-08 15:48:13 +02:00
97c9eee322
Fix display of correct program name
2016-05-08 08:11:35 +02:00
aae58d5a68
A-Netz: Calibration of tone levels on TX and RX side
2016-05-06 07:05:52 +02:00
4356c93afa
common: Add pre and de emphasis, if the radio does not support it
...
Connect to the oscillator of the transmitter - good girl!
You need to enable pre emphasis in this case.
Connect to the discriminator of the receiver - good boy!
You need to enable de emphasis in this case.
2016-04-24 15:14:56 +02:00
9de121109d
common code: Sample rate conversion now supports any rate above 8000 Hz
2016-04-17 16:49:39 +02:00
1146537d84
common code: Add feature to record received audio and replay it
...
-W <file.wav> writes a wave file of received audio
-R <file.wav> reads a wave file to feed into decoder
This way you can record a phone and later debug without a phone
and radio equipment.
2016-03-27 17:56:04 +02:00
a5db02775e
fixup debug class definition: rename DFSK and DAUDIO to DDSP
2016-03-15 19:26:13 +01:00
Andreas Eversberg
Andreas Eversberg