a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
cff7622f5c
Move mobile phone specific code from libcommon.a to libmobile.a
2017-09-01 18:42:49 +02:00
3c0bcce97b
Move German tones from common code to individual implementation
2017-09-01 18:42:48 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
ae2b0cce0c
B-Netz: Be more tollerant with quality of continuous tones
2017-09-01 18:42:44 +02:00
ee61c4362b
B-Netz: Use standard deviation to determine if an FSK frame is valid or not
2017-08-16 18:51:45 +02:00
41bd9999b1
B-Netz: Add metering pulse support (Gebuehrenimpuls)
2017-08-16 18:51:44 +02:00
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
7c9ce960d7
Fixes of checking digits
2017-08-08 12:54:21 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
3e86ef95c4
B-Netz: Minor printf fix
2017-06-10 17:49:59 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
fc3b3e07be
Finetuning LOSS (noise) detection
...
The algorithm is still bad, but works in most cases
2017-05-24 14:00:08 +02:00
c086e66b7c
minor cleanups
2017-05-17 20:14:37 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
f72c53757d
B-Netz, NMT: Improved check for minimum required sample rate
2017-02-18 21:01:15 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
a7e47f83d7
Fixed paging channel switching of B-Netz
...
Now the calling channel is switched correctly.
A global parameter is used to select how paging is performed.
2017-02-18 21:01:03 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
a5fd375237
Fixed typos
2017-02-18 21:00:55 +01:00
fee4846c3f
SDR forces default settings: emphasis and FSK polarity
2017-02-18 21:00:52 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
57993e3e48
Support for UHD SDR interface
2017-02-18 21:00:49 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
286c11cab4
B-Netz: Add translation of emergency numbers 110 and 112
2017-01-02 17:38:54 +01:00
b59ce96889
B-Netz: Minor change on start image
2017-01-02 10:19:07 +01:00
3400f555fe
Add common function to give hotkey help
...
* Key to dial and hangup
* Key to display wave form
2016-12-09 16:42:38 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
f111c50478
A-Netz / B-Netz: Add function to change state, debug with channel info
...
Change state uses a function rather than directly setting state
variable.
Some debug commands now use channel number. (for multi-trx setups)
2016-12-06 17:47:58 +01:00
Andreas Eversberg
0b43b63d1f
Fixed command line option descriptions
2016-11-29 10:59:09 +01:00
d52d0242bf
Output enhancements
...
* no more flicker on wave form display while scrolling
* dialing console gets cleared/overwritten correctly
* fixes on stderr output
2016-11-29 07:49:21 +01:00
938fb74bae
B-Netz: Fixes call procedure according to the standard FTZ 171 R 4
2016-11-27 22:06:47 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
34954b50de
B-Netz: Rename special start digit for coin box phone type
2016-11-13 06:39:14 +01:00
2a4abc62b2
Move realtime scheduling and signal handling to common code
2016-11-13 06:37:56 +01:00
ea32ab3fa3
B-Netz: Move 'telegramm' generation to seperate telegramm.c/h files
2016-10-31 18:21:26 +01:00
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
0593f7d066
Fix typos
2016-07-24 12:31:09 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
Andreas Eversberg
Andreas Eversberg