40c24a70b2
Restructure: Move emphasis from common code to 'libemphasis'
2017-11-25 19:23:56 +01:00
16194c15f9
Restructure: Move goertzel from common code to 'libgoertzel'
2017-11-25 19:23:54 +01:00
c84318b245
Restructure: Move jitter from common code to 'libjitter'
2017-11-25 19:23:53 +01:00
8f6d0752df
Restructure: Move squelch from common code to 'libsquelch'
2017-11-25 19:23:50 +01:00
60ffdcaf53
Restructure: Move hagelbarger from common code to 'libhagelbarger'
2017-11-25 19:23:49 +01:00
ac7bb3539f
Restructure: Move wave from common code to 'libwave'
2017-11-25 19:23:47 +01:00
fd3a4d7ac2
Restructure: Move dtmf from common code to 'libdtmf'
2017-11-25 19:23:46 +01:00
ffd934709f
Restructure: Move classic German tones from common code to 'libgermanton'
2017-11-13 20:14:03 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
1b183864bb
Restructure: Move sample rate conversion from common code to 'libsamplerate'
2017-11-13 19:34:05 +01:00
669705c6ed
Restructure: Move filters from common code to 'libfilter'
2017-11-13 19:15:09 +01:00
fc1c5de547
Fixed pointer corruption bug in timer.c
2017-11-11 09:36:05 +01:00
ce2bb8ec43
Fixup call control split
2017-11-11 05:55:32 +01:00
ca6d70566c
Fixup displaying measurements (array overflow)
2017-11-05 16:59:59 +01:00
e8a3306eee
Add option to cross-connect calls; Calls between mobiles are now possible
...
Use -x to enable call cross-connect. No MNCC socket, no call device must
be specified!
Be sure to have at least one control channel and two voice channels.
Alternatively you can use one combined control/voice channel and one
voice channel.
2017-11-05 16:59:58 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
2c4d0ee687
SDR: Check if the required bandwidth can be handled by given sample rate
2017-10-22 19:23:09 +02:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
e67c171035
SDR: Minor fixes in error condition handling
2017-10-22 19:23:05 +02:00
975e34211b
Call control: Minor logging fixes
2017-10-22 19:23:02 +02:00
ae29f84ed7
Fixed typo
2017-10-12 19:46:32 +02:00
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
1a4a08386c
Only dial if call is on-hook or disconnected
2017-10-02 12:34:34 +02:00
f469879ed0
SDR: Use filter to remove harmonics caused by downsampling/upsampling
...
This drastically increases the signal-noise-ratio and removes co-channel
interferences. It gains CPU usage, but only on SDR threads, not on the
main thread.
2017-09-24 15:59:24 +02:00
ff5faa8697
SDR: Improved IQ plot display, increase dynamics of spectrum display
2017-09-24 15:57:56 +02:00
08dd180ea0
Add echo test feature to check mobile phone's mic + speaker
...
Add '-e' to command line option, but do not select MNCC nor call device
2017-09-21 20:29:30 +02:00
274cb7992b
SDR: Improvement of spectrum view, peaks are drawn correctly
2017-09-16 10:48:48 +02:00
b6326aa473
Move commonly used German tones (A/B/C-Netz) to separate lib.a
2017-09-11 20:35:18 +02:00
7017fd7b3c
Give hint to alter PKG_CONFIG_PATH, if SoapySDR or UHD was not found
2017-09-11 20:31:29 +02:00
9205767f94
SDR: Display spectrum graph together with channel numbers and position
2017-09-02 15:41:11 +02:00
496aff5a79
Add implementation of analog TV signal generator (PAL so far)
...
Quick and dirty Howto:
make && tv/osmotv --sdr-soapy --sdr-tx-gain 60 -r 15000000 -c 21 tx-fubk --sdr-tune-args "OFFSET=-3000000"
2017-09-02 07:34:50 +02:00
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
05c516ca16
SDR: Fixed stack overflow by allocating memory instead of local buffers
2017-09-01 18:42:52 +02:00
3bfba37fff
Corrected print messages in wave file processing.
2017-09-01 18:42:50 +02:00
cff7622f5c
Move mobile phone specific code from libcommon.a to libmobile.a
2017-09-01 18:42:49 +02:00
3c0bcce97b
Move German tones from common code to individual implementation
2017-09-01 18:42:48 +02:00
d2472cfca6
Emphasis: Add filter to prevent emphasis above 4000 Hz
...
Remove obsolete filter from fsk.c.
2017-09-01 18:42:47 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
064d95f37e
Fixup: SDR: Show IQ data with three colors
...
Use correct threshold values to display colors
2017-09-01 18:42:42 +02:00
ea7cbb8675
SDR: Add option to enable TX timestamps on UHD devices (disabled by default)
2017-08-16 18:51:47 +02:00
8489914bf0
SDR: Add time consumption debug code
2017-08-16 18:51:46 +02:00
42a87c1c2f
SDR: Name SDR TX and RX threads
2017-08-16 18:51:46 +02:00
3afcac8342
SDR: Add option to swap RX and TX frequencies (for testing)
2017-08-10 17:42:54 +02:00
f2d439c1ae
UHD: Remove buggy sample rate check
2017-08-10 15:59:29 +02:00
999b6a2b4d
UHD: Make frequency settings more tollerant (+-100 Hz are accepted)
2017-08-09 17:27:14 +02:00
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
ffd3b848e1
Implementation of "Radiocom 2000", the analog French mobile network
2017-08-09 17:27:12 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
d20b41a457
Fixed command line option for call audio device (headset)
...
--call-device option now works.
Thanx to Fabricio pointing to this bug.
2017-08-08 12:54:45 +02:00
5090f5a18d
SDR: Show IQ data with three colors to detect input overdrive
...
green: up to 0.45
yellow: between 0.45 and 0.9
red: above 0.9
2017-08-08 12:54:03 +02:00
Andreas Eversberg