8489914bf0
SDR: Add time consumption debug code
2017-08-16 18:51:46 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
2c1ab89723
Notify about usage of channels that are next to each other
...
It is required to have at least one free channel between channels, to
avoid interferences.
This is only a warning, it will not reject channels next to each other.
2017-05-24 14:01:25 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
6e0e0c9ce8
fixup Rework on audio buffer management
2017-05-15 21:46:28 +02:00
8e0d7d2513
samplerate.c: Allow transcoding to lower sample rate other than 8000 Hz
2017-03-04 16:52:20 +01:00
4201717f36
Rework on audio buffer management
...
Use function to get samples to be sent to fill audio buffers to a
level. This replaces the function that only shows how much data
is in the buffer.
This way the function itself can control how much data will be
sent.
2017-03-04 06:35:38 +01:00
2e1999b1ee
Start streaming of sound/SDR just before main loop
...
This prevents buffer overflow during init/creation processes
2017-02-25 07:09:53 +01:00
f5e9a97c31
--rx-gain option works now only with sound card
2017-02-18 21:01:16 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
bd7ccc5fa0
Add global DC-Filter and remove all individual DC-Filters
2017-02-18 21:01:12 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
a7e47f83d7
Fixed paging channel switching of B-Netz
...
Now the calling channel is switched correctly.
A global parameter is used to select how paging is performed.
2017-02-18 21:01:03 +01:00
19b396ab4d
Wave recording and playback now uses multi channels
2017-02-18 21:00:59 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
b30b61282c
Generic SDR support
2017-02-18 21:00:48 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
6c1b6119ad
common code: Display multiple wave forms for each channel used
...
Use 'w' key to enable/disable RX wave form display.
2016-10-31 19:16:47 +01:00
c1a02a5029
common code: Fix double free bug
2016-10-28 16:55:39 +02:00
1ea95de120
C-Netz: Use emphasis with 200 uS time constant
2016-10-23 08:46:05 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
f729b32745
C-Netz: Fixed multi-transceiver mode and show channel in various logs
2016-07-31 18:48:19 +02:00
7d5d3da8d3
Add function to display wave form from input/loop
...
Use 'w' to toggle display.
Move terminal input processing and main loop to main_common.c
2016-06-17 17:03:28 +02:00
4d22b11855
common code: Add debug #define for capture generated singal
...
Used for fundamental debugging of encoded signal
2016-06-12 16:11:20 +02:00
bae12156a2
common code: Add input gain option
2016-05-08 15:49:45 +02:00
7434e21dc2
Multi transceiver support
...
This can be multiple transceivers on multiple sound cards.
Two transceivers can be bundled on one sound device as well, using both channels.
2016-05-08 15:48:13 +02:00
16acdbf59d
Implementation of C-Netz (German mobile telephone system)
2016-04-24 15:19:00 +02:00
4356c93afa
common: Add pre and de emphasis, if the radio does not support it
...
Connect to the oscillator of the transmitter - good girl!
You need to enable pre emphasis in this case.
Connect to the discriminator of the receiver - good boy!
You need to enable de emphasis in this case.
2016-04-24 15:14:56 +02:00
1146537d84
common code: Add feature to record received audio and replay it
...
-W <file.wav> writes a wave file of received audio
-R <file.wav> reads a wave file to feed into decoder
This way you can record a phone and later debug without a phone
and radio equipment.
2016-03-27 17:56:04 +02:00
946c9ce10a
initial git import
2016-03-13 09:12:11 +01:00
Andreas Eversberg
Andreas Eversberg