1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
016e72d6d7
Restructure: Move display from common code to 'libdisplay'
2017-12-03 08:45:55 +01:00
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
1650cc5ad2
Restructure: Move sdr from common code to 'libsdr'
2017-12-03 08:45:45 +01:00
45a5568f70
Restructure: Move sound from common code to 'libsound'
2017-11-25 19:28:36 +01:00
7b539d5dc7
Restructure: Move mncc from common code to 'libmncc'
2017-11-25 19:28:33 +01:00
083ea4edaa
Restructure: Move fsk from common code to 'libfsk'
2017-11-25 19:24:03 +01:00
f4754dcb37
Restructure: Move fm_modulation from common code to 'libfm'
2017-11-25 19:24:02 +01:00
7af9b752a0
Restructure: Move 'libgermantone' to a-netz code
2017-11-25 19:23:59 +01:00
40c24a70b2
Restructure: Move emphasis from common code to 'libemphasis'
2017-11-25 19:23:56 +01:00
16194c15f9
Restructure: Move goertzel from common code to 'libgoertzel'
2017-11-25 19:23:54 +01:00
c84318b245
Restructure: Move jitter from common code to 'libjitter'
2017-11-25 19:23:53 +01:00
8f6d0752df
Restructure: Move squelch from common code to 'libsquelch'
2017-11-25 19:23:50 +01:00
ac7bb3539f
Restructure: Move wave from common code to 'libwave'
2017-11-25 19:23:47 +01:00
ffd934709f
Restructure: Move classic German tones from common code to 'libgermanton'
2017-11-13 20:14:03 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
1b183864bb
Restructure: Move sample rate conversion from common code to 'libsamplerate'
2017-11-13 19:34:05 +01:00
669705c6ed
Restructure: Move filters from common code to 'libfilter'
2017-11-13 19:15:09 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
5e14471eb6
B-Netz: Fixup of metering pulse
2017-10-22 19:23:17 +02:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
b6326aa473
Move commonly used German tones (A/B/C-Netz) to separate lib.a
2017-09-11 20:35:18 +02:00
a52c89800c
SDR: Split SDR config from main_mobile.c to sdr_config.c
2017-09-02 07:34:48 +02:00
cff7622f5c
Move mobile phone specific code from libcommon.a to libmobile.a
2017-09-01 18:42:49 +02:00
3c0bcce97b
Move German tones from common code to individual implementation
2017-09-01 18:42:48 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
ae2b0cce0c
B-Netz: Be more tollerant with quality of continuous tones
2017-09-01 18:42:44 +02:00
ee61c4362b
B-Netz: Use standard deviation to determine if an FSK frame is valid or not
2017-08-16 18:51:45 +02:00
41bd9999b1
B-Netz: Add metering pulse support (Gebuehrenimpuls)
2017-08-16 18:51:44 +02:00
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
7c9ce960d7
Fixes of checking digits
2017-08-08 12:54:21 +02:00
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
3e86ef95c4
B-Netz: Minor printf fix
2017-06-10 17:49:59 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
fc3b3e07be
Finetuning LOSS (noise) detection
...
The algorithm is still bad, but works in most cases
2017-05-24 14:00:08 +02:00
c086e66b7c
minor cleanups
2017-05-17 20:14:37 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
f72c53757d
B-Netz, NMT: Improved check for minimum required sample rate
2017-02-18 21:01:15 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
a7e47f83d7
Fixed paging channel switching of B-Netz
...
Now the calling channel is switched correctly.
A global parameter is used to select how paging is performed.
2017-02-18 21:01:03 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
Andreas Eversberg