538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
76a3484c5c
C-Netz: Make demodulation algorithm (slope or leve) slectable via option
...
By default (auto), the algorithm is selected, depending on sound card
or SDR usage. For testing and debugging purpose, the algorithm can be
forced.
2017-05-19 19:11:59 +02:00
c086e66b7c
minor cleanups
2017-05-17 20:14:37 +02:00
ef7ff26793
C-Netz: SDR now uses zero-crossing to detect level changes.
...
This does not work with analog radio, but with SDR it works.
The quality should be better and the process is faster.
2017-05-17 20:06:46 +02:00
9d87b5bf0f
C-Netz: Improved transmission of speech
...
The speech is now correctly ramped up and down during pause bits.
2017-05-17 20:06:44 +02:00
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
369bda87a9
C-Netz: Improved decoder debugging
...
FM decoder debug output is now written to text files for better
debugging of process.
2017-05-15 21:46:25 +02:00
8e0d7d2513
samplerate.c: Allow transcoding to lower sample rate other than 8000 Hz
2017-03-04 16:52:20 +01:00
3fc4fc54be
main_common: Move init and cleanup function to main function
2017-03-04 07:12:12 +01:00
f689244f98
C-Netz: OgK must be on first channel, so sync works correctly
2017-02-18 21:02:56 +01:00
438ce08add
SoapySDR support
...
There is no time stamp handling. It is just TX'ing in advance and
synchronous to received RX rate.
2017-02-18 21:02:55 +01:00
17b6124122
C-Netz: Remove useless -V option
2017-02-18 21:02:54 +01:00
4de1e0188d
C-Netz: Add low pass filter to eliminate high frequency noise
...
This improves the FSK decoding quite allot, especially with SDR.
2017-02-18 21:02:52 +01:00
3fb2ade352
C-Netz: Fix release of call process when no dialing was received from phone
2017-02-18 21:02:48 +01:00
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
5f1d7bc970
C-Netz: Improve clock speed measurements.
...
Sound card's clock measurements only requires a few minutes to get sub-ppm
accuracy results.
2017-02-18 21:02:46 +01:00
faa3dfb7d4
C-Netz: Make average to clock measurements for a quicker result
2017-02-18 21:01:19 +01:00
8cb0187133
C-Netz: Remove the obviously useless noise function for unused timeslots
2017-02-18 21:01:17 +01:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
bd7ccc5fa0
Add global DC-Filter and remove all individual DC-Filters
2017-02-18 21:01:12 +01:00
71e556e7ff
Work on emphasis filter: Neutral @ 1000 Hz; Use filter before de-emphasis
2017-02-18 21:01:11 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
ac0da3f76e
Filter improvement: LP and HP filters, added test function
...
The -3 dB level at cut-off frequency is now maintained for multiple
iterations.
2017-02-18 21:01:04 +01:00
2d8d7e62c1
Use global init/cleanup function
2017-02-18 21:00:58 +01:00
a5fd375237
Fixed typos
2017-02-18 21:00:55 +01:00
fee4846c3f
SDR forces default settings: emphasis and FSK polarity
2017-02-18 21:00:52 +01:00
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
57993e3e48
Support for UHD SDR interface
2017-02-18 21:00:49 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
713b1ab118
Rename functions and structure of biquad lowpass filter
2017-01-07 06:28:23 +01:00
2d0bc92cde
C-Netz: Make demodulation buffer size dynamic
2017-01-07 06:26:50 +01:00
a37dfe38ab
C-Netz: Fixed double free bug
2017-01-07 06:26:49 +01:00
3400f555fe
Add common function to give hotkey help
...
* Key to dial and hangup
* Key to display wave form
2016-12-09 16:42:38 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
27c6e3d860
C-Netz: Add code documentation...
2016-12-01 17:59:08 +01:00
e34d74aa23
C-Netz: Simplifying TX signal clock sync between two channels
2016-11-30 18:09:38 +01:00
Andreas Eversberg
0b43b63d1f
Fixed command line option descriptions
2016-11-29 10:59:09 +01:00
d52d0242bf
Output enhancements
...
* no more flicker on wave form display while scrolling
* dialing console gets cleared/overwritten correctly
* fixes on stderr output
2016-11-29 07:49:21 +01:00
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
f911717aa4
C-Netz: Minor coding style changes, no changes to process
2016-11-22 19:09:05 +01:00
2a4abc62b2
Move realtime scheduling and signal handling to common code
2016-11-13 06:37:56 +01:00
c6d3a41b81
C-Netz: Increment error counter only when trying to reach the phone
2016-10-23 11:50:02 +02:00
1ea95de120
C-Netz: Use emphasis with 200 uS time constant
2016-10-23 08:46:05 +02:00
8864db8269
C-Netz: Adjusting compandor response level
2016-10-23 08:45:24 +02:00
e763d3c6ed
C-Netz: Changing keepalive interval to 2 minutes and retry to 1 minute
2016-10-23 07:32:21 +02:00
33e0bc5f4e
C-Netz: Remove global variables, because they don't speed up anything
2016-10-07 09:14:22 +02:00
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
8ef966aa21
C-Netz: Reset FSK decoder when switching channel mode
...
This prevents corrupt frames, as well as clear pending frames that
were received during the old mode, but may not be received during
the new mode.
2016-10-07 08:00:34 +02:00
eac595bd17
C-Netz: Don't access transaction after destroying it
2016-10-07 08:00:10 +02:00
0cec2f28be
Add check if fromat at PDEBUG() is consistent (like printf)
...
The bugs it found are fixed too.
2016-10-07 07:52:17 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
17930af920
C-Netz: callref is moved completely to transaction object
2016-10-02 09:06:04 +02:00
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
767daf73cd
C-Netz: Documentation of the call process in the source code
2016-08-13 15:22:28 +02:00
7f786fc00a
C-Netz: Fix missing callref assignment (MT call)
2016-08-07 17:20:06 +02:00
5182f70671
C-Netz: Documentation of some system informations
2016-08-07 17:17:38 +02:00
e484814c0a
C-Netz: Add hack to increase voice deviation for some newer phone
2016-08-03 12:40:56 +02:00
3a7388ba7f
C-Netz: Fixed some debugging output
2016-08-03 12:40:55 +02:00
2bd7c16baa
C-Netz: Add support for extended frequency band. (October 1989)
2016-08-03 12:40:54 +02:00
e4079b8ce8
C-Netz: Fix release cause coding
2016-08-03 12:03:54 +02:00
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
c9012c7663
C-Netz: Release MT call, if mobile phone does not respond
2016-08-02 09:02:58 +02:00
eb85afa49c
C-Netz: Use cosine-square ramp for better signal generation
2016-08-02 07:39:02 +02:00
ce7a98206a
C-Netz: Move callref to transaction. Callref on SpK only when its busy.
...
Only when busy, the channel has callref. This is required for audio
routing. During setup, the callref assigned to transaction and kept
there until release to/from upper layer.
2016-08-01 19:17:13 +02:00
664f8c7ac0
C-Netz: retry call setup messages up to 3 times
2016-08-01 12:15:12 +02:00
b84a64f872
C-Netz: Autoselect polarity on all transceivers
2016-08-01 12:15:09 +02:00
77cd21e7c2
C-Netz: Fix transaction list corruption
2016-08-01 12:15:08 +02:00
f729b32745
C-Netz: Fixed multi-transceiver mode and show channel in various logs
2016-07-31 18:48:19 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
f39ee2f15a
common code: Add support for main loop handler
2016-07-09 11:27:02 +02:00
2ee51022f4
Rename 'compander' to 'compandor'
2016-06-20 19:37:56 +02:00
4d52f955b3
common code: Add processing interval option to decrese CPU usage
2016-06-18 19:33:08 +02:00
e10898c1e8
C-Netz: Minor cosmetic fixes
2016-06-18 08:05:18 +02:00
051cc81b13
C-Netz: Move transaction routines to seperate file
2016-06-12 16:11:20 +02:00
c933250685
Add dsp mode change fuction to A and B Netz, fixed NMT
2016-06-12 16:11:20 +02:00
1ceb3026dd
Fixed link problem with alsa lib
...
Thanx to Martin for pointing to this problem.
2016-05-16 18:41:21 +02:00
90dbc0cbd7
C-Netz: Debug fixes
2016-05-15 20:44:07 +02:00
e9640c0cd8
C-Netz: Fix TX polarity selection
2016-05-15 20:43:49 +02:00
9ecb87f3e6
Fixing station ID command line parameter
2016-05-15 20:43:38 +02:00
7aa2445b47
Move amplitude (level) debugging to debug.c
2016-05-15 20:37:06 +02:00
60d9a7b496
C-Netz: Advice about requirement of emphasis done by software
2016-05-13 19:23:43 +02:00
46fa72894e
C-Netz: Calibration/fix processing of tone levels on TX and RX side
...
FSK and compander levels are adjusted.
Eliminate offsets between subsequent speech chunks. This is done by
high-pass filter. An offset is not passed to the filter.
Do correct audio processing chain:
time compress -> compressor -> scrambler / pre-emphasis -> TX
RX -> de-scrambler / de-emphasis -> expander -> time expand
2016-05-13 09:37:03 +02:00
5a9c9c7401
C-Netz: Send 5280 Hz test tone on idle speech channel
2016-05-13 09:37:03 +02:00
3a54f46b81
C-Netz: Fixup debug output at database
2016-05-13 09:37:02 +02:00
e2a9c2c6a5
Automatic FSK polarity selection on TX side
...
This is done by simulating two cells with different polarities.
On first message from mobile station, the cell with the correct
polarity is used, the other is disabled.
On RX side the polarity is not selected, since FSK decoder detects
polarity for every frame.
2016-05-13 09:37:01 +02:00
57ba648ac4
C-Netz: Add tiny database to track if phones are online
...
Reject calls, if not online.
Use an interval to check if the phones are still online.
2016-05-08 15:53:00 +02:00
bae12156a2
common code: Add input gain option
2016-05-08 15:49:45 +02:00
1ce67c14e9
C-netz: Tuning scrambler
2016-05-08 15:49:29 +02:00
7434e21dc2
Multi transceiver support
...
This can be multiple transceivers on multiple sound cards.
Two transceivers can be bundled on one sound device as well, using both channels.
2016-05-08 15:48:13 +02:00
de0ce7ba98
C-Netz: Correct clear cause on clearing by mobile station
2016-05-08 15:47:01 +02:00
8b6b87d8cc
C-Netz: Lowest mobile station power by default
2016-05-08 15:46:51 +02:00
95f44e9840
C-Netz: Fixed typo
2016-05-08 15:46:43 +02:00
11302272ce
C-Netz: Minor fix on clock speed indication
2016-05-08 15:46:34 +02:00
97c9eee322
Fix display of correct program name
2016-05-08 08:11:35 +02:00
16acdbf59d
Implementation of C-Netz (German mobile telephone system)
2016-04-24 15:19:00 +02:00
Andreas Eversberg
Andreas Eversberg