6e2fd793ac
Increase compiler warnings and fix them
2024-04-05 21:51:41 +02:00
a20637825a
Audio rework, new jitter buffer
...
Jitter buffer is now based on packets, not on samples. The frames are
dejittered in received form. After reading from jitter buffer, they are
decoded in correct order. If a frame is missing, it is concealed by
repeating audio.
2024-03-30 23:28:05 +01:00
3158c48365
Move from local to external osmo* libraries
...
src/libdebug -> libosmocore
src/libselect -> libosmocore
src/libtimer -> libosmocore
src/libosmocc -> libosmo-cc
src/libg711 -> libosmo-cc
2024-02-18 16:23:29 +01:00
2b7efedc48
Refactoring jitter buffer
...
Features are:
* Packet based buffer
* Random in, first out
* Adaptive delay compensation (voice)
* Fixed delay (data, optionally MODEM/FAX)
* Interpolation of missing frames
* Any sample size
2022-10-23 16:56:27 +02:00
dde4113e61
Improvement of Goertzel filter. Using Hamming window now. Add test routine.
2021-12-08 17:24:04 +01:00
c2f14834e5
Rename dbm0 (level) to speech (level)
...
In mobile communications we use speech level instead of milliwatts.
The deviation (FM) is always based on speech level, not on 1 milliwatt.
2019-12-08 17:24:36 +01:00
af4bcb1522
Remove useless debug lines
2019-08-26 21:10:33 +02:00
6df0eb46cc
Fix compiler warnings
2018-02-15 08:00:15 +01:00
0b129d3c7f
libdisplay: Removing dependency from libmobile
2018-02-15 08:00:14 +01:00
1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
743d147d16
SDR: Turn TX power off if requested by network
...
The power level is ramped smoothly within 1 ms up or down.
R2000, AMPS and C-Netz turn off power when voice channel is not i use.
C-Netz turns off power between OgK timeslots.
2017-09-01 18:42:46 +02:00
7e45f556ce
Correcting all levels and move all remaining integer samples to sample_t
...
The leves are based on the standards of each mobile network. They
are adjusted to the specified frequency deviation now.
2017-02-18 21:01:13 +01:00
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
538a959128
Indexing tables by casting index to unsigned integer only
2017-02-18 21:01:06 +01:00
bf0abd627d
A-Netz: Option to set gain of paging tones
2017-02-18 21:00:54 +01:00
c5cf88ce57
Prepare for SDR: Add bandwidth and deviation info to sender instance
2017-02-18 21:00:47 +01:00
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
e724823c5b
A-Netz: Reset tone detector when going idle
...
A pending tone must be detected as soon as the cell is idle. This happens
if the phone picks up during release guard time.
2017-01-02 10:13:43 +01:00
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
Andreas Eversberg
481181fa74
A-Netz: Click removal when changing sequenced paging tones
...
When tone changes to next tone, a transition of 2ms is performed. The last
tone is faded out and the new tone faded in.
2016-11-14 18:36:50 +01:00
52b1ac65f4
A-Netz: Keep phase for each paging tone when played in sequence
...
If paging tones are played in sequence, only one tone out of four tones
is played at once. The phase of all tones are calculated as if each tone
would have been sent permanently.
2016-11-13 06:00:24 +01:00
0cec2f28be
Add check if fromat at PDEBUG() is consistent (like printf)
...
The bugs it found are fixed too.
2016-10-07 07:52:17 +02:00
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
0593f7d066
Fix typos
2016-07-24 12:31:09 +02:00
6a5af9aeac
Typos: acknowledgement -> acknowledgment signalling -> signaling
2016-07-24 12:31:08 +02:00
c933250685
Add dsp mode change fuction to A and B Netz, fixed NMT
2016-06-12 16:11:20 +02:00
aae58d5a68
A-Netz: Calibration of tone levels on TX and RX side
2016-05-06 07:05:52 +02:00
a5db02775e
fixup debug class definition: rename DFSK and DAUDIO to DDSP
2016-03-15 19:26:13 +01:00
946c9ce10a
initial git import
2016-03-13 09:12:11 +01:00
Andreas Eversberg
Andreas Eversberg