osmocom-analog/src/libfsk/fsk.c

/* FSK audio processing (coherent FSK modem)
 *
 * (C) 2017 by Andreas Eversberg <jolly@eversberg.eu>
 * All Rights Reserved
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <math.h>
#include "../libsample/sample.h"
#include "../libdebug/debug.h"
#include "fsk.h"

#define PI			M_PI

/*
 * fsk = instance of fsk modem
 * inst = instance of user
 * send_bit() = function to be called whenever a new bit has to be sent
 * receive_bit() = function to be called whenever a new bit was received
 * samplerate = samplerate
 * bitrate = bits per second
 * f0, f1 = two frequencies for bit 0 and bit 1
 * level = level to modulate the frequencies
 * coherent = use coherent modulation (FFSK)
 * bitadjust = how much to adjust the sample clock when a bitchange was detected. (0 = nothing, don't use this, 0.5 full adjustment)
 */
int fsk_init(fsk_t *fsk, void *inst, int (*send_bit)(void *inst), void (*receive_bit)(void *inst, int bit, double quality, double level), int samplerate, double bitrate, double f0, double f1, double level, int coherent, double bitadjust)
{
	double bandwidth;
	int i;
	int rc;

	PDEBUG(DDSP, DEBUG_DEBUG, "Setup FSK for Transceiver. (F0 = %.1f, F1 = %.1f, peak = %.1f)\n", f0, f1, level);

	memset(fsk, 0, sizeof(*fsk));

	/* gen sine table with deviation */
	fsk->sin_tab = calloc(65536+16384, sizeof(*fsk->sin_tab));
	if (!fsk->sin_tab) {
		fprintf(stderr, "No mem!\n");
		rc = -ENOMEM;
		goto error;
	}
	for (i = 0; i < 65536; i++) 
		fsk->sin_tab[i] = sin((double)i / 65536.0 * 2.0 * PI) * level;

	fsk->inst = inst;
	fsk->rx_bit = -1;
	fsk->rx_bitadjust = bitadjust;
	fsk->receive_bit = receive_bit;
	fsk->tx_bit = -1;
	fsk->level = level;
	fsk->send_bit = send_bit;
	fsk->f0_deviation = (f0 - f1) / 2.0;
	fsk->f1_deviation = (f1 - f0) / 2.0;
	if (f0 < f1) {
		fsk->low_bit = 0;
		fsk->high_bit = 1;
	} else {
		fsk->low_bit = 1;
		fsk->high_bit = 0;
	}

	/* calculate bandwidth */
	bandwidth = fabs(f0 - f1) * 2.0;

	/* init fm demodulator */
	rc = fm_demod_init(&fsk->demod, (double)samplerate, (f0 + f1) / 2.0, bandwidth);
	if (rc < 0)
		goto error;

	fsk->bits_per_sample = (double)bitrate / (double)samplerate;
	PDEBUG(DDSP, DEBUG_DEBUG, "Bitduration of %.4f bits per sample @ %d.\n", fsk->bits_per_sample, samplerate);

	fsk->phaseshift65536[0] = f0 / (double)samplerate * 65536.0;
	PDEBUG(DDSP, DEBUG_DEBUG, "phaseshift65536[0] = %.4f\n", fsk->phaseshift65536[0]);
	fsk->phaseshift65536[1] = f1 / (double)samplerate * 65536.0;
	PDEBUG(DDSP, DEBUG_DEBUG, "phaseshift65536[1] = %.4f\n", fsk->phaseshift65536[1]);

	/* use coherent modulation, i.e. each bit has an integer number of
	 * half waves and starts/ends at zero crossing
	 */
	if (coherent) {
		double waves;

		fsk->coherent = 1;
		waves = (f0 / bitrate);
		if (fabs(round(waves * 2) - (waves * 2)) > 0.001) {
			fprintf(stderr, "Failed to set coherent mode, half waves of F0 does not fit exactly into one bit, please fix!\n");
			abort();
		}
		fsk->cycles_per_bit65536[0] = waves * 65536.0;
		waves = (f1 / bitrate);
		if (fabs(round(waves * 2) - (waves * 2)) > 0.001) {
			fprintf(stderr, "Failed to set coherent mode, half waves of F1 does not fit exactly into one bit, please fix!\n");
			abort();
		}
		fsk->cycles_per_bit65536[1] = waves * 65536.0;
	}

	return 0;

error:
	fsk_cleanup(fsk);
	return rc;
}

/* Cleanup transceiver instance. */
void fsk_cleanup(fsk_t *fsk)
{
	PDEBUG(DDSP, DEBUG_DEBUG, "Cleanup FSK for Transceiver.\n");

	if (fsk->sin_tab) {
		free(fsk->sin_tab);
		fsk->sin_tab = NULL;
	}

	fm_demod_exit(&fsk->demod);
}

//#define DEBUG_MODULATOR
//#define DEBUG_FILTER

/* Demodulates bits
 *
 * If bit is received, callback function send_bit() is called.
 *
 * We sample each bit 0.5 bits after polarity change.
 *
 * If we have a bit change, adjust sample counter towards one half bit duration.
 * We may have noise, so the bit change may be wrong or not at the correct place.
 * This can cause bit slips.
 * Therefore we change the sample counter only slightly, so bit slips may not
 * happen so quickly.
 */
void fsk_receive(fsk_t *fsk, sample_t *sample, int length)
{
	sample_t I[length], Q[length], frequency[length], f;
	int i;
	int bit;
	double level, quality;

	/* demod samples to offset around center frequency */
	fm_demodulate_real(&fsk->demod, frequency, length, sample, I, Q);

	for (i = 0; i < length; i++) {
		f = frequency[i];
		if (f < 0)
			bit = fsk->low_bit;
		else
			bit = fsk->high_bit;
#ifdef DEBUG_FILTER
			printf("|%s| %.3f\n", debug_amplitude(f / fabs(fsk->f0_deviation)), f / fabs(fsk->f0_deviation));
#endif
	

		if (fsk->rx_bit != bit) {
#ifdef DEBUG_FILTER
			puts("bit change");
#endif
			fsk->rx_bit = bit;
			if (fsk->rx_bitpos < 0.5) {
				fsk->rx_bitpos += fsk->rx_bitadjust;
				if (fsk->rx_bitpos > 0.5)
					fsk->rx_bitpos = 0.5;
			} else
			if (fsk->rx_bitpos > 0.5) {
				fsk->rx_bitpos -= fsk->rx_bitadjust;
				if (fsk->rx_bitpos < 0.5)
					fsk->rx_bitpos = 0.5;
			}
		}
		/* if bit counter reaches 1, we subtract 1 and sample the bit */
		if (fsk->rx_bitpos >= 1.0) {
			/* peak level is the length of I/Q vector
			 * since we filter out the unwanted modulation product, the vector is only half of length */
			level = sqrt(I[i] * I[i] + Q[i] * Q[i]) * 2.0;
			/* quality is defined on how accurat the target frequency it hit
			 * if it is hit close to the center or close to double deviation from center, quality is close to 0 */
			if (bit == 0)
				quality = 1.0 - fabs((f - fsk->f0_deviation) / fsk->f0_deviation);
			else
				quality = 1.0 - fabs((f - fsk->f1_deviation) / fsk->f1_deviation);
			if (quality < 0)
				quality = 0;
#ifdef DEBUG_FILTER
			printf("sample (level=%.3f, quality=%.3f)\n", level / fsk->level, quality);
#endif
			/* adjust the values, because this is best we can get from fm demodulator */
			fsk->receive_bit(fsk->inst, bit, quality / 0.95, level);
			fsk->rx_bitpos -= 1.0;
		}
		fsk->rx_bitpos += fsk->bits_per_sample;
	}
}

/* modulate bits
 *
 * If first/next bit is required, callback function send_bit() is called.
 * If there is no (more) data to be transmitted, the callback functions shall
 * return -1. In this case, this function stops and returns the number of
 * samples that have been rendered so far, if any.
 *
 * For coherent mode (FSK), we round the phase on every bit change to the
 * next zero crossing. This prevents phase shifts due to rounding errors.
 */
int fsk_send(fsk_t *fsk, sample_t *sample, int length, int add)
{
	int count = 0;
	double phase, phaseshift;

	phase = fsk->tx_phase65536;

	/* get next bit */
	if (fsk->tx_bit < 0) {
next_bit:
		fsk->tx_bit = fsk->send_bit(fsk->inst);
#ifdef DEBUG_MODULATOR
		printf("bit change to %d\n", fsk->tx_bit);
#endif
		if (fsk->tx_bit < 0)
			goto done;
		/* correct phase when changing bit */
		if (fsk->coherent) {
			/* round phase to nearest zero crossing */
			if (phase > 16384.0 && phase < 49152.0)
				phase = 32768.0;
			else
				phase = 0;
			/* set phase according to current position in bit */
			phase += fsk->tx_bitpos * fsk->cycles_per_bit65536[fsk->tx_bit & 1];
#ifdef DEBUG_MODULATOR
			printf("phase %.3f bitpos=%.6f\n", phase, fsk->tx_bitpos);
#endif
		}
	}

	/* modulate bit */
	phaseshift = fsk->phaseshift65536[fsk->tx_bit & 1];
	while (count < length && fsk->tx_bitpos < 1.0) {
		if (add)
			sample[count++] += fsk->sin_tab[(uint16_t)phase];
		else
			sample[count++] = fsk->sin_tab[(uint16_t)phase];
#ifdef DEBUG_MODULATOR
		printf("|%s|\n", debug_amplitude(fsk->sin_tab[(uint16_t)phase] / fsk->level));
#endif
		phase += phaseshift;
		if (phase >= 65536.0)
			phase -= 65536.0;
		fsk->tx_bitpos += fsk->bits_per_sample;
	}
	if (fsk->tx_bitpos >= 1.0) {
		fsk->tx_bitpos -= 1.0;
		goto next_bit;
	}

done:
	fsk->tx_phase65536 = phase;

	return count;
}

/* reset transmitter state, so we get a clean start */
void fsk_tx_reset(fsk_t *fsk)
{
	fsk->tx_phase65536 = 0;
	fsk->tx_bitpos = 0;
	fsk->tx_bit = -1;
}