Make sure old configs using "logging level lms <level>" are still accepted.
Initialization order of VTY componenets need to be resorted since newly
introduced command requires logging VTY node to be already setup
beforehand.
Change-Id: Ia195a74a62a8a3dd6267fb1359acaa5628208d8e
After discussion in [1] and further look at the code, it became obvios
rx_underrun events are not happening in general for any SDR (don't
exist), so let's drop that counter. Instead, add Tx Dropped Packet counters,
which were not accounted prior to this commit.
[1] bde55afd29
Change-Id: Iff1535c219a4695a511d383d7c4b06ef6eff959d
It was initially thought that underruns/overrun fields were
increasing-over-time values.
However, after reading LimeSuite code, it seems overrun and
underrun fields are actually reset upon every call to
LMS_GetStreamStatus().
Related: osmo-trx.git 9281771256
Related: https://github.com/myriadrf/LimeSuite/issues/265
Change-Id: I677232a7b12ee83d26aa34d92f76a91d4b5a63a6
Introduce a unified implementation-agnostic interface for radioDevice to
signal SDR error counters to upper layers and manage them.
This patch only implements counters for osmo-trx-lms (other devices will
show all counters unchanged during time).
Sample use through VTY:
"""
OsmoTRX> show rate-counters
osmo-trx statistics 0:
device:rx_underruns: 0 (0/s 0/m 0/h 0/d) Number of Rx underruns
device:rx_overruns: 0 (0/s 0/m 0/h 0/d) Number of Rx overruns
device:tx_underruns: 0 (0/s 0/m 0/h 0/d) Number of Tx underruns
device:rx_drop_events: 4 (0/s 2/m 3/h 0/d) Number of times Rx samples were dropped by HW
device:rx_drop_samples: 513 (0/s 196/m 425/h 0/d) Number of Rx samples dropped by HW
"""
Change-Id: I78b158141697e5714d04db8b9ccc96f31f34f439
Existing code had a typo (value was assigned from wrong variable).
Furthermore, it was experimentally found that:
while underrun/overrun are documented as "FIFO overrun
count" in LimeSuite.h, it seems droppedPackets ("Number of dropped
packets by HW") is not actually an incrementing counter like the others,
but simply a value set every time LMS_RecvStream() is called. Since we
are actually interested in keeping the count over time, adjust code to
achieve that.
Change-Id: Id93d33400e11360b9536f56a31904328549cfbbf
Also take the chance to make sure we handle properly short reads (keep
reading again).
Both scenarios can be tested by running osmo-trx-lms and then using
on a terminal:
sudo kill -STOP `pidof osmo-trx-lms`; sleep 0.5; sudo kill -CONT `pidof osmo-trx-lms`
Fixes: OS#3339
Change-Id: Idfc4e69acc30afb11440b6b9cbdcfa09ff920265
It's really not used, so let's drop unused code and simplify work for
new to come device drivers implementation.
Change-Id: I0d18f9c2584771e2f7b3d5c6b016e764e02855ff
ALERT log level is not Osmocom standard level, it's just a define in
osmo-trx to keep compatibility with old code.
Same goes for one reference to "ERR" intead of "ERROR".
Change-Id: I0e171a8ac8a8bfa804ac97fba3d73efcfa6424b4
No need to use the heap here since buffer is only used as a temporary
trash. Using the stack is quicker.
Change-Id: Iede8dc0903ee3865a52c8e2fd811bcde444fee33
add device dependant max gain setup - limesdr mini and limenet micro need slightly reduced maximum gains to get a PASS on phase error measurements
rework clock reference setup - external clock needs to be selected before calling LMS_Init(), internal can only be set after.
remove now unused compat_LMS_VCTCXO* functions - we do not set the VCTXCO directly anymore
Change-Id: I3cf905b0a84bc1ec200891762a6646141ee37181
move enable: it is important that channels are actually enabled before applying any configuration (besides external clock)
move disable: move to close, so channels are not disabled and not enabled again while osmotrx is active.
Change-Id: I82878913254ce15a85db8d006e13d5eb639793e9
Allow selecting a specific LimeSDR device by setting dev-args in the
config file. Split up the given dev-args address by comma and select
the device where all substrings can be found.
I could not test this with real hardware, but I have added a test case
to make sure this works as expected.
Related: OS#3654
Change-Id: Ib9aaa066a01bf9de3f78234d7ada884d6f28c852
Under failure, it could still be that stream status is updated, so let's
father that in all cases.
Change-Id: I4e2b8be06d2993db1bab233948a8ee774b8ac4ee
This change fixes lots of memory leaks inside libLimeSuite as
announced by ASan after exiting the osmo-trx process (throgh
CTRL+C for instance).
This way also we make sure libLimeSuite can communicate with the HW and
close whatever subsystems were enabled during LMS_Open time.
Change-Id: I56ffb87079e34aa2d0322fd2ca6429742f9f7640
They are recreated during start(). Actually, if they are not stopped
here, during start() after stop(), LMS_SetupStream() will fail because
it will detect the streams are already opened.
Change-Id: I70d47c287aabdabc5dc1304a942d130aeb10bdc5
So far, the Rx gain was set to 34 dB, wile the comment stated it
would be set to half-point, which is 73/2=36dB. Let's adjust the
code to match the comment.
Change-Id: Idc646def53b83faf4e6c011fb595fa436e223b32
The following warning was observed with GCC 4.8.5:
make[4]: Entering directory `.../osmo-trx/Transceiver52M/device/lms'
CXX LMSDevice.lo
LMSDevice.cpp: In member function 'LMSDevice::writeSamples()':
LMSDevice.cpp:582:22: warning: 'rc' may be used uninitialized
in this function [-Wmaybe-uninitialized]
samplesWritten += rc;
Let's fix this by zero-initializing 'rc'.
Change-Id: I4b4a061fc12e5fd1db8d1087d8e0c46ff1e23412
If LImeSDR device is unplugged or its fw crashes during operation,
reading from the device will fail and will first receive short reads and
finally 0 byte reads. Let's quickly notify these events to upper layers
instead of trying to process the buffer and checking timestamps for
something we know it's already not useful.
Related: OS#3340
Change-Id: Ib1af8cdd6cdadf581b039882add4049eea45a0f7
The DMAIN category got too overloaded. Let's have the code in
Transceive52M/device/* use the new DDEV category.
Also, in some cases the log levels have been adjusted to ensure
that enabling INFO level should not result in a complete overflow
of messages during normal operation.
Change-Id: I844fe4a75bf277cd3cc5bd8fa06e06ad97b2ea95
Until now, setRxGain in LMSDevice did not take into account the setter
parameter and was always using hardcoded 34dB, which was experimentally
found to be a good default value.
Let's force that value during initialization, but still allow the upper
layers (controlled by BTS) to set different values. osmo-bts only sends
a SETRXGAIN command (which calls setRxGain in osmo-trx) if a value is
explicitly set in its VTY config, so we are on the safe side if the user
doesn't explicitly configure a desired dB.
Change-Id: I5684e675281a3f581855dbb56d199a6fe238a712
There might be some configuration that's not supported by osmo-bts-lms,
and we should reject that properly.
Change-Id: I6f82edce589030a4407f6150fb7e8abe6417c1f2
Closes: OS#3347
In Change-Id Ib2fca81b76d027b08e2891056fa076d071597783 we introduced
some coding style violations. Let's make newly-added code follows
standard Osmocom coding style.
Change-Id: Ib7ddd275014f03a2eed3cddc02b1356e2b00c0bc
It's not good style to have the derived classes initialize members
inherited from the base class using "this->foo = bar". Rather, let's
make the base class have a constructor, and call that constructor to
initialize the members of the base class.
While doing this
* rename 'offset' to 'lo_offset' to avoid confusion with timestamp offset
* move 'InterfaceType' into the base class
* move 'chans' into the base class
* move 'rx_sps' into the base class
* mark base class members as 'protected'
Change-Id: Ib885675a7612a392aa7f75fca81269ddcff2f6ab
Pau Espin
Martin Hauke
Joachim Steiger
Oliver Smith
Harald Welte
Vadim Yanitskiy