Before this patch, reconnecting to osmo-trx and attempting to configure it for
another band is not going to work without restarting the process.
The new variable is added in order to still allow POWEROFF followed by a
POWERON without need to reconfigure the device. In that case, previous
configuration is kept.
Change-Id: I43e5e1e4dcb36be605c6bd25dd6a5f3649e244e7
Gain setting without a band was apparently led to a very low output
level, thanks to defog for pointing this out.
Change-Id: I8b59d38dd7b0781776c9e61226185879541fdc53
Related: OS#3342
Neither VTY nor CTRL API is used in device specific code, excluding
the 'uhd' where osmo_cpu_sched_vty_apply_localthread() is called.
Change-Id: I568b443da4b96c005734d749faa22b9c7440f951
Prior to this patch, osmo-trx relied totally on proper VTY configuration
being set in "rssi-offset" together with the RxGain set through TRXC in
order to provide correct Uplink RSSI measurements to bts-trx.
With this patch, RSSI is now by default calculated (in LMS and UHD
backends) based on the currently set RxGain, by providing empirically
discovered values. Still, for backward compatibility, the old
"rssi-offset" command will overwrite completely the per-default
calculated rssi offset.
A new optional parameter "relative" is added at the end of the
"rssi-offset" VTY command to flag the value as relative to the newly
per-default calculated value. This way specific setups (like adding a
LNA / RF fronted) can still be expressed while still keeping the
automatic per-default offset.
Related: OS#4468
Change-Id: I8ef78fd20c22c60d61bfb18d80a4a36df4fd6c20
In the multi-ARFCN mode, if the Tx/Rx antenna names are explicitly
set in 'chan N' sections of the configuration file:
trx
...
multi-arfcn disable
chan 0
tx-path TX/RX
rx-path RX2
chan 1
tx-path TX/RX
rx-path RX2
chan 2
tx-path TX/RX
rx-path RX2
osmo-trx would crash, because radioDevice::set_antennas() would
attempt to configure antenna names for all N physical channels,
while USRP devices usually have 2 or even 1 available.
The easiest approach is to remove both 'tx-path'/'rx-path' from
all 'chan N' sections excluding 'chan 0', so it would work fine.
This makes sense, because in the multi-ARFCN mode we actually
use only one physical channel.
However, let's still make sure that explicit configuration of the
Tx/Rx antenna names would not crash osmo-trx and skip N > 0 in
radioDevice::set_antennas().
Change-Id: I09f316f181cbbc2214e8913b73f7c1fcea4e8c05
Related: OS#4636
We cannot use C99 or higher features in C code!
Last lines of build log:
[ 265s] for (unsigned int i = 0; i < decoded_region->num_chans; i++)
[ 265s] ^
[ 265s] ipc-driver-test.c:473:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile
your code
[ 265s] Makefile:580: recipe for target 'ipc_driver_test-ipc-driver-test.o' failed
[ 265s] make[5]: *** [ipc_driver_test-ipc-driver-test.o] Error 1
Change-Id: I80c9cbd77f1cdf323ad2b492de7e9a177840c383
This adds a IPC backend that uses shared memory interface
to communicate with (proprietary) devices.
Requires config file option
dev-args ipc_msock=/path/to/socket
to specify the master socket the ipc backend should connect to.
If UHD is avaialble the ipc-driver-test tool can be used to test the
backend with a uhd device, this was so far only tested with a b2xx.
Change-Id: Ice63d3499026293ade8aad675ff7a883bcdd5756
Using the new libosmovty features allow for:
* Setting different cpu-affinity masks for each thread in the process,
both at startup through .cfg file as well as changing it at runtime.
* Unified VTY interface to change the scheduling policy of the process
inherited by all osmocom processes enabling the feature.
Depends: libosmocore.git Change-Id If76a4bd2cc7b3c7adf5d84790a944d78be70e10a
Depends: osmo-gsm-masnuals.git Change-Id Icd75769ef630c3fa985fc5e2154d5521689cdd3c
Related: SYS#4986
Change-Id: I3798603779b88ea37da03033cf7737a6e4751d6e
Currently configuring 3 channels in multi-ARFCN mode makes the
process crash during the Rx/Tx antenna configuration due to
uncaught UHD specific LookupError/IndexError exceptions:
terminate called after throwing an instance of 'uhd::index_error'
what(): LookupError: IndexError: multi_usrp:
TX channel 2 out of range for configured TX frontends
Let's catch them and terminate gracefully.
Change-Id: If66305f2787c6292375e4bfbd60c1d3d764cffd4
Related: OS#4636
All radioDevice subclasses except USRPDevice have already been reworked
to use the new SetPowerAttenuation() methods, hence we can drop the
compatibility layer that was added to transition from the old API to the
new one, and move those functions to USRPDevice.
This way we simplify the parent abstract class with methods not needed
by most devices and not used anymore by external users of those classes.
Change-Id: Ice005cd0a07c49b6e212c06f1228ef93c24db727
Right now, according to a few measurements taken on LimeMicro devices, we
expect the Tx Gain at UHD level to relate 1:1 with the slope in Tx output
power given a specific band.
If more fine-grained results are wanted or some device doesn't follow a
1:1 slope relationship, functions TxGain2TxPower and TxPower2TxGain need
to be adapted/improved.
This patch is basically doing the same thing as was done previously for
UHDDevice in 992c9bd1ce.
Related: OS#4583
Change-Id: If154fe4d4cd118aa30ea43c22ee7119117b77da6
Right now, according to a few measurements taken on B210, we expect the
Tx Gain at UHD level to relate 1:1 with the slope in Tx output power
given a specific band.
If more fine-grained results are wanted or some device doesn't follow a
1:1 slope relationship, functions TxGain2TxPower and TxPower2TxGain need
to be adapted/improved.
Change-Id: I6f432465dce5c6ec1f1bc4653f6149efb18c3f43
All the Tx gain related APIs are left out of reach from radioInterface,
and in there we simply interact with radioDevice passing the attenuation
received from TRXC.
Prior gain logic is moved in base radiodevice class, with the idea that
the setTxGain() and related functions will be dropped over time in each
sublcass in favour of an specific implementation of the
SetPowerAttenuation API.
Change-Id: I4f8a1bcbed74aa9310306b97b0b1bfb02f7855e6
The table with nominal UHD Tx Gains and real transmit power is filled
with values measured experimentally. More information can be found in
OS#4583.
Related: OS#4583
Change-Id: If7ef5bf95ffe4afe5864c0f051853aa38b9639eb
It allows the BTS to retrieve the nominal transmit output power value of
each TRX in order to compute attenuation later on and apply it through
SETPOWER or ADJPOWER TRXC commands.
Change-Id: I1d7efe56e008d8d60e23f9a85aa40809f7f84d9c
The out "isControl" parameter is only used by internal callers of
USRPDevice, and not used at all by any user of the generic API
(radioInterface*.cpp). Hence, we can get rid of it and keep it as a flag
for an internal API of USRPDevice.
Change-Id: I843384e24b76cdd28a95f9ee4e95e6157098e4a3
The out "RSSI" parameter is only filled by USRPDevice, and not used at
all by any user of the API (radioInterface*.cpp).
RSSI seems to be computed nowadays in the common path in
Transceiver::pullRadioVector().
Change-Id: I06c2ea5a9891d170bc468f952bbf2a7e64d95784
With current state multi-arfcn can be used (eg. I can place a call
between 2 phones using TRX1 and sustain for as long as wanted), but from
time to time (around every 20seconds), a burst of Tx packed dropped
events from LimeSuite appears.
LimeNet-micro coefficients have yet not been tested.
Related: OS#4362
Change-Id: I7e67d90a8126546eeeeba376f816ec5d158d4712
Right now the values are the same for all devices, but they will differ
in forthcoming commits once multi-arfcn support is added.
Change-Id: I262d3a71848fc3070473e29e42820848e7591d02
Add an enum containing each supported device type (LimeSDR-USB,
LimeSDR-Mini and LimeNet-Micro) plus "unknown", to leave some room for
yet-to-come devices to run with some generic parameters without
rebuilding osmo-trx.
Each device type is assigned a dev_desc structure, and all of them are
put in HashMap, similar to what's already done in UHDDevice.cpp.
Device type is infered from string provided by LMS_GetDeviceInfo(), as
it was already done before in several places. From now on, we only need
to parse the string once since we store the device type after first
during open time.
Later on, more fields will be moved to device-type specific structure,
such as Tx timing offset, clock rate, etc.
Change-Id: I7658615787c5bc41c365bab9c11733b701ac2ae5
Release is done in destructor, so let's move allocation to constructor
since there's really no need to have them in open() which is already
quite complex and large.
Change-Id: I8a4fd973590c4c165abd8f2837b2da8fc14a2066
channel number mangling based on multi-arfcn feature being enabled was
moved to generic radioDevice() to reuse code. Hence, the generic parent
constructor sets this->chans to 1 if multi-arfcn feature is requested.
However, LMSDevice constructor argument had same name as the class
instance attribute, taking preference. As a result, if multi-arfcn is
enabled in LMSDevice, the generic constructor first sets this->chans=1
but afterwards LMSDEvice constructor keeps calling .resize() with the
argument value "chans" instead of using this->chans.
Let's rename the argument in all radioDevice child class constructors to
avoid potential future bugs in all of them.
Change-Id: Id6c837e9133f22783dd92a81dfcc493e51bf2d21
Vadim Yanitskiy
Pau Espin
Eric Wild
Harald Welte
Pau Espin Pedrol