The dev type was set too early, but the actual dev is only being
discovered during open, so update it. This broke the gain to power
mapping by defaulting to a wrong device.
Change-Id: I1dda6023ca6f15bc063c3dfbc704db2410ff7c98
Before this patch, reconnecting to osmo-trx and attempting to configure it for
another band is not going to work without restarting the process.
The new variable is added in order to still allow POWEROFF followed by a
POWERON without need to reconfigure the device. In that case, previous
configuration is kept.
Change-Id: I43e5e1e4dcb36be605c6bd25dd6a5f3649e244e7
Prior to this patch, osmo-trx relied totally on proper VTY configuration
being set in "rssi-offset" together with the RxGain set through TRXC in
order to provide correct Uplink RSSI measurements to bts-trx.
With this patch, RSSI is now by default calculated (in LMS and UHD
backends) based on the currently set RxGain, by providing empirically
discovered values. Still, for backward compatibility, the old
"rssi-offset" command will overwrite completely the per-default
calculated rssi offset.
A new optional parameter "relative" is added at the end of the
"rssi-offset" VTY command to flag the value as relative to the newly
per-default calculated value. This way specific setups (like adding a
LNA / RF fronted) can still be expressed while still keeping the
automatic per-default offset.
Related: OS#4468
Change-Id: I8ef78fd20c22c60d61bfb18d80a4a36df4fd6c20
This adds a IPC backend that uses shared memory interface
to communicate with (proprietary) devices.
Requires config file option
dev-args ipc_msock=/path/to/socket
to specify the master socket the ipc backend should connect to.
If UHD is avaialble the ipc-driver-test tool can be used to test the
backend with a uhd device, this was so far only tested with a b2xx.
Change-Id: Ice63d3499026293ade8aad675ff7a883bcdd5756
Using the new libosmovty features allow for:
* Setting different cpu-affinity masks for each thread in the process,
both at startup through .cfg file as well as changing it at runtime.
* Unified VTY interface to change the scheduling policy of the process
inherited by all osmocom processes enabling the feature.
Depends: libosmocore.git Change-Id If76a4bd2cc7b3c7adf5d84790a944d78be70e10a
Depends: osmo-gsm-masnuals.git Change-Id Icd75769ef630c3fa985fc5e2154d5521689cdd3c
Related: SYS#4986
Change-Id: I3798603779b88ea37da03033cf7737a6e4751d6e
Currently configuring 3 channels in multi-ARFCN mode makes the
process crash during the Rx/Tx antenna configuration due to
uncaught UHD specific LookupError/IndexError exceptions:
terminate called after throwing an instance of 'uhd::index_error'
what(): LookupError: IndexError: multi_usrp:
TX channel 2 out of range for configured TX frontends
Let's catch them and terminate gracefully.
Change-Id: If66305f2787c6292375e4bfbd60c1d3d764cffd4
Related: OS#4636
Right now, according to a few measurements taken on B210, we expect the
Tx Gain at UHD level to relate 1:1 with the slope in Tx output power
given a specific band.
If more fine-grained results are wanted or some device doesn't follow a
1:1 slope relationship, functions TxGain2TxPower and TxPower2TxGain need
to be adapted/improved.
Change-Id: I6f432465dce5c6ec1f1bc4653f6149efb18c3f43
The table with nominal UHD Tx Gains and real transmit power is filled
with values measured experimentally. More information can be found in
OS#4583.
Related: OS#4583
Change-Id: If7ef5bf95ffe4afe5864c0f051853aa38b9639eb
It allows the BTS to retrieve the nominal transmit output power value of
each TRX in order to compute attenuation later on and apply it through
SETPOWER or ADJPOWER TRXC commands.
Change-Id: I1d7efe56e008d8d60e23f9a85aa40809f7f84d9c
The out "isControl" parameter is only used by internal callers of
USRPDevice, and not used at all by any user of the generic API
(radioInterface*.cpp). Hence, we can get rid of it and keep it as a flag
for an internal API of USRPDevice.
Change-Id: I843384e24b76cdd28a95f9ee4e95e6157098e4a3
The out "RSSI" parameter is only filled by USRPDevice, and not used at
all by any user of the API (radioInterface*.cpp).
RSSI seems to be computed nowadays in the common path in
Transceiver::pullRadioVector().
Change-Id: I06c2ea5a9891d170bc468f952bbf2a7e64d95784
channel number mangling based on multi-arfcn feature being enabled was
moved to generic radioDevice() to reuse code. Hence, the generic parent
constructor sets this->chans to 1 if multi-arfcn feature is requested.
However, LMSDevice constructor argument had same name as the class
instance attribute, taking preference. As a result, if multi-arfcn is
enabled in LMSDevice, the generic constructor first sets this->chans=1
but afterwards LMSDEvice constructor keeps calling .resize() with the
argument value "chans" instead of using this->chans.
Let's rename the argument in all radioDevice child class constructors to
avoid potential future bugs in all of them.
Change-Id: Id6c837e9133f22783dd92a81dfcc493e51bf2d21
This way switch is applied correctly to parent structures and features
can be used later by other children classes (other devices).
Change-Id: I24d6c66bb3195ba2513b4a67daa14cdfbacdce6d
After previous changes, radioInterfaceMulti is expected to handle channel
conversion correctly, so it will always use chan 0 for all these
functions. This simplifies code in radioDevice avoiding need to add
checks to all devices supporting multi-arfcn in the future.
Change-Id: Ib2cd50a6ceaeedc6aaf3e1bb51d33b52911b6eba
This code is not needed anymore since we are setting SCHED_RR scheduler
with a real time priority in main thread during startup, so all threads
will inherit same rt priority, which should be enough to keep the
process working reliably even on high system loads (from non rt
processes).
osmo-trx was tested to be reliable during test with stress-ng as
explained in related ticket below.
Related: OS#2344
Change-Id: I3a88946dd71e9aeeaac9d19d396e2236c302b608
During 87b7d098e5 we dropped support for
UHD specific functionalitites, and so clk_rt is not needed anymore.
Change-Id: I37403e085ed6a541bbdecf64f1f9a821ff2753a4
It's really not used, so let's drop unused code and simplify work for
new to come device drivers implementation.
Change-Id: I0d18f9c2584771e2f7b3d5c6b016e764e02855ff
Buffer size is based on num of chans and rxBuffer size is based on num
of chans and rx_spp, and both are available and set during open(), so no
need to waste time allocating and freeing them everytime we read from
the device.
Change-Id: I8c881c9c303c80f323825d85a924d74b76d2ce47
ERR is osmo-trx legacy level, which actually converts to osmocom's
ERROR, so let's use that one directly.
Change-Id: I82f6f89a725bea7f7acfa455c20cf922cc3f8a00
* move class definition to .h file, like we do for other devices.
* move smpl_buf class to a different file inside uhd/.
* Preparation work to have smpl_buf being used in a generic way for
devices other than UHD (LMS).
Change-Id: Ib4594320da9bb7f6e9f52e7d70d11ecd11106aae
When using multi-arfcn feature, several logical channels (arfcn) are multiplxed
into one physical transceiver, as can be seen in
uhd_device::set_channels.
As a result, when multi-arfcn is enabled some properties are actually
shared for those logical channels, and internally mapped to the first
(only existing) channel, and per-channel internal array variables are allocated
accordingly (size() == 1).
When setting RxGain, we need to set the correct existing physical
channel. Same check is done in getRxGain, and then we apply the RxGain correctly and
we avoid outputing an error "Requested non-existent channel" immediatelly after.
Change-Id: I5b02bb1ef6450dc48be7b8058d96a5691847d3cc
osmo-trx can start a considerable amount of threads that can make
debugging it challenging at least. By using phtread_setname_np, the
system sets a meaningful name to the thread which can be seen while
debugging with gdb or by printing /proc/$pid/task/$tid/comm.
Now we also log system TID when setting the name so we can identify
different tasks in /proc even if pthread_setname_np fails.
Change-Id: I84711739c3e224cb383fd12b6db933785b28209e
Fixes compilation warning:
In file included from osmo-trx/Transceiver52M/device/uhd/UHDDevice.cpp:31:
/usr/include/uhd/utils/thread_priority.hpp:10:17: note: #pragma message: This header is deprecated - please use <uhd/utils/thread.hpp> instead.
Header was moved in uhd.git c33928d2bbdd27688c3475e77fc461e7d16eba5a.
Change-Id: I6299df48a5e14c54eaa07288d166c705eb9ebdbe
The DMAIN category got too overloaded. Let's have the code in
Transceive52M/device/* use the new DDEV category.
Also, in some cases the log levels have been adjusted to ensure
that enabling INFO level should not result in a complete overflow
of messages during normal operation.
Change-Id: I844fe4a75bf277cd3cc5bd8fa06e06ad97b2ea95
It's not good style to have the derived classes initialize members
inherited from the base class using "this->foo = bar". Rather, let's
make the base class have a constructor, and call that constructor to
initialize the members of the base class.
While doing this
* rename 'offset' to 'lo_offset' to avoid confusion with timestamp offset
* move 'InterfaceType' into the base class
* move 'chans' into the base class
* move 'rx_sps' into the base class
* mark base class members as 'protected'
Change-Id: Ib885675a7612a392aa7f75fca81269ddcff2f6ab
This way code of radioInterface is independent of the device and doesn't
need to be rebuild for each device.
Change-Id: Id104e1edef02f863b6465ced5b4241050dc188f9