112 lines
4.0 KiB
Plaintext
112 lines
4.0 KiB
Plaintext
This document describes the handling of TBFs
|
|
--------------------------------------------
|
|
|
|
Notes:
|
|
TBF
|
|
Instance for one temporary block flow.
|
|
|
|
LLC Frame
|
|
Current frame to be transmitted or received. If tbf->llc_length is not 0,
|
|
the frame exists, if 0, the frame does not exist. If tbf->llc_index is not
|
|
0, parts of the frame have been transmitted or received so far.
|
|
|
|
LLC Queue
|
|
Queue of next frames to be transmitted.
|
|
|
|
States:
|
|
GPRS_RLCMAC_ASSIGN
|
|
After a downlink TBF is created, it resides in this state until the
|
|
block flow can start. This is required to give the mobile time to listen
|
|
to connect to downlink PDCH.
|
|
|
|
GPRS_RLCMAC_FLOW,
|
|
During packet flow, this state indicates downlink and uplink TBF block
|
|
flow.
|
|
|
|
GPRS_RLCMAC_FINISHED,
|
|
Uplink TBF:
|
|
After final block is received AND all other blocks are completely
|
|
received, the state is entered. The PACKET CONTROL ACK is still not
|
|
received. (Counter N3103 is counted on each poll request.)
|
|
Downlink TBF:
|
|
All blocks including the final block has been transmitted. Not all
|
|
downlink blocks are acknowledged yet. (Counter N3015 is counted on each
|
|
poll request.)
|
|
|
|
GPRS_RLCMAC_WAIT_RELEASE,
|
|
The all blocks on downlink TBF have been acked by mobile. The penalty
|
|
timer T3192 is running on mobile.
|
|
|
|
GPRS_RLCMAC_RELEASING,
|
|
Wait for TFI/USF to be re-used. This state is entered when a counter
|
|
reaches it's maximum and T3169 is running.
|
|
|
|
|
|
When downlink LLC PDU is received:
|
|
|
|
If downlink TBF exists for given TLLI, but not in RELEASING state:
|
|
If downlink TBF is in FLOW or FINISHED state:
|
|
Enqueue PDU to LLC Queue of TBF.
|
|
Done.
|
|
If downlink TBF is in WAIT RELEASE state:
|
|
Attach PDU to LLC Frame of TBF.
|
|
Put TBF back into FLOW state.
|
|
Done.
|
|
If dowlink TBF does not exists for given TLLI, or in RELEASING state:
|
|
Create new downlink TBF.
|
|
Attach PDU to LLC Frame of TBF.
|
|
If uplink TBF exists for given TLLI, but not in RELEASING state:
|
|
Assign packet channel PACCH.
|
|
Done.
|
|
If uplink TBF does not exists for given TLLI, or in RELEASING state:
|
|
Assign packet channel AGCH.
|
|
Done.
|
|
|
|
When channel request for uplink TBF is received:
|
|
|
|
Create new uplink TBF.
|
|
If channel request was received on RACH
|
|
Assign packet channel AGCH.
|
|
Done
|
|
If channel request was received on PACCH
|
|
Assign packet channel PACCH.
|
|
Done
|
|
|
|
Handling of LLC Frame of downlink TBF and LLC Queue of downlink TBF:
|
|
|
|
If a downlink TBF is created, the LLC PDU is attached to LLC Frame of TBF
|
|
(downlink flow is assigned to MS).
|
|
|
|
If a downlink TBF exists, the LLC PDU is enqueued to LLC Queue of TBF.
|
|
|
|
During transfer of downlink blocks, the LLC Queue is dequeued whenever all
|
|
segments of LLC Frame were used for generation of downlink blocks. (If a
|
|
block is partly filled with LLC Frame segment, its remaining space is filled
|
|
with the next LLC Frame from the Queue.)
|
|
|
|
If the transfer is finished, no more LLC Frames are dequeued from the LLC
|
|
Queue, in case a new frame has arrived during lifetime of TBF.
|
|
|
|
If the all downlink blocks have been acknowledged, the LLC Queue is
|
|
dequeued and an existing frame is attached to LLC Frame. If so, the new
|
|
state is FLOW (downlink flow is assigned to MS), otherwise WAIT RELEASE.
|
|
|
|
If a new LLC PDU is attached to LLC Frame during WAIT RELEASE state, the
|
|
state is changed to FLOW (downlink flow is assigned to MS).
|
|
|
|
Handling of LLC Frame on uplink TBF:
|
|
|
|
Received uplink blocks are appended to LLC Frame of TBF. If the PDU is
|
|
complete, it is forwarded to the upper layer.
|
|
|
|
Polling:
|
|
In order to poll uplink control block from MS, a special poll state and
|
|
frame number is stored at TBF. The scheduler reads that value and will not
|
|
assign uplink ressource for other TBFs at that frame number.
|
|
|
|
When there is no uplink transmission received on the block, a timeout is
|
|
indicated by layer 1 interface. There are two ways of checking timeout:
|
|
- The received frame is bad (BFI).
|
|
- The GSM indicates that the block should have been already received.
|
|
|