Compared to the previous code there will be a branch to get the
global pointer so the code will be slightly slower than the previous
version but it allows us to start creating objects but still use
the code from C. It is best approach I have found so far.
One downside of C++ is that by default talloc will not be used
(unless we override the new operator to use talloc. Right now
we need to memset the C data structure by hand. The benefit of
enforcing a better structure should is more important though.
The PCU does not properly re-set the state when the connection to the
BTS is lost (and the SGSN potentially is re-started during that). This
results in the BSSGP BVCI > 1 remaining blocked and no data will be
accepted by the SGSN.
Add the '-e' option and exit the PCU when the BSSGP/NS are getting
destroyed.
The timing advance of any TBF is stored when it ends. Whenever a new TBF
with the same TLLI is created (downlink TBF), the stored TA is recalled.
This algorithm assumes that the mobile does not move too fast during
transfer. Also the mobile must start a connection in order to get correct
initial timing advance.
This algorithm does not implement the timing advance procedure as defined
in TS 04.60. To implement the standard timing advance procedure, the BTS
must decode RACH on certain bursts, the mobile is expected to send them.
This requires much more complexity to a transceiver like USRP/UmTRX or
Calypso BTS.
The algorithm was tested at TA >= 8 and works quite well.
I ported the Holger's scheduling patch from sysmobts to osmo-pcu.
This is usefull, if PCU uses direct access to the DSP of sysmobts.
The latency to respond to a PH-READY_TO_SEND.ind may not be higher
than 18ms. Currently we are using nice to increase our priority but
for a heavily loaded cell this is not enough. Add an option to enable
realtime scheduling and use it in the screenrc.
Linux offers two realtime scheduling classes these are SCHED_FIFO
and SCHED_RR. For SCHED_FIFO the process is running as long as possible
(potentially taking all the CPU and never yielding it), for SCHED_RR
the process can still be pre-empted at the end of the timeslice.
Using SCHED_RR appears to be the more safe option as a run-a-way
sysmobts process will not be able to take all the CPU time.
Since we don't know the RX and TX parameters of the BTS that might be used
with PCU, the MS should not adapt the TX power from the RX level. So the
MS should always transmits with same power.
Finding an 'alpha' and 'gamma' value that will result in a constant
RX level at the BTS is a task of deployment.
It is quite essential. It shows how TBFs are related and helps to estimate
states and timers (timeouts) of the MS.
In order to use it, it must be defined by a switch at gprs_rlcmac.h.
The signal handler will end the main loop, so clean exit is performed.
The allocated memory is dumped in order to detect memory leaks.
All talloc functions use tall_pcu_ctx context instead of NULL, to track
memory leaks.
Merge is based on jolly_new branch with two modifications.
1. Modified PCU L1 interface.
pcu_l1_if.cpp - common functions for tx and rx messages on L1 interface.
sysmo_sock.cpp - SYSMO-PCU socket functions.
openbts_sock.cpp - OpenBTS-PCU socket functions.
pcuif_proto.h - L1 interface's primitives.
2. Modified encoding of RLC/MAC Control messages, now we use structures and encode_gsm_rlcmac_downlink() function for encode control blocks (without hand-coding).
The hack for resetting BSSGP instance is removed and now performed
whenever the NS state changes to UNBLOCKED.
The BSSGP instance is now created only once, as it should be.
Received STATUS messages are ignored as they should be.
The creation and destruction of BSSGP/NS instances is now handled by
layer 1 interface alone.
The option added is required to change PLMN that is announced to SGSN.
This allows BTS to have a different PLMN.
(Usefull for roaming in conjunction with simlock.)
These informations provide RAI, timers, counters and other attributes to
the BSSGP and RLC/MAC processes.
The attributes are stored in gprs_rlcmac_bts global structure.
The OpenBTS socket functions are moved from main to pcu_l1_if.cpp.
New sysmo_l1_if.cpp is introduced. It used special unix socket interface
to connect to sysmo-BTS. This is required to access CCCH/RACH and info
about cell layout. Traffic is also forwarded via this interface, but
it direct access of L1 baseband DSP will be added soon.
In order to handle ready-to-send requests above l1_if, the transmit
queue (for downlink blocks) is moved to gprs_rlcmac.cpp.
The TBF instance additionally holds TRX and TS info, but this is only
a hack currently. TBF instance requires more details about allocated
ressources in the future.
Holger Hans Peter Freyther
Harald Welte