This adds compression of bitmap in PUAN. The compressed bitmap
is used only if the number of bits in the bitmap does not fit in
the message and there is a gain after compression.
The algorithm is part of libosmocore and so there is dependency
on the libosmocore for compilation.
The algorithm is tested on integration setup by forcing compression.
Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
Adds spb counters at BTS level(show bts statistics).
Adds RLC/MAC downlink control msg at ms level(show ms imsi <imsi_val>).
Adds the number of coding schemes counter for UL at TBF level.
Change-Id: Icbe4ba95e34bea89ee36f532d099db68204b7c38
row 4 of Table 10.4.14a.1 of Spec 44.060 version 7.27.0 Release 7. Says
"The previous RLC data block contains a Upper Layer PDU, or a part of it,
that fills precisely the previous data block and for which there is no
length indicator in that RLC data block.
The current RLC data block contains a Upper Layer PDU that either fills
the current RLC data block precisely or continues in the next RLC data block."
So when we receive block with 1st LI: value=0 and Value of E bit in the
same octet as 1, we expect 2 chunks with 1st chunk as length as 0 and complete
and 2nd chunk as length non zero. But with this bug we see only 1 chunk causing
incorrect assembling
This issue has been fixed in this patch.
Related: OS#1811
Change-Id: I2cd0fca3ed28a553ede3f4b8a7d3267284dd2c9b
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
Modify the existing data structure to support ARQ-II for Retx in EGPRS DL.
This will also hadle compilation issue related to renaming the variable.
Change-Id: I734b1024bb32f2daa43af4adf59f4a17f2294afe
This patch will add support for MCS5,6 in EGPRS UL along with incorrect
assert correction to let MCS 6 work.
Change-Id: Iac2422c8acbdcefe20aafbba6a4eb87c9893e3ba
Reviewed-on: https://gerrit.osmocom.org/269
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
The size of the hole array in bytes was used instead of the size of elements.
Change-Id: If6bf3e5f1ad773ddaa9fb2ce7c069e6b26659cbf
Reviewed-on: https://gerrit.osmocom.org/105
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently the checks in that function are based on the different
internal TS values of a TBF. It is assumed that they match the TS
that the current RTS refers to.
This commit adds a TS parameter to create_ul_ass, create_dl_ass,
and create_ul_ack to make this more explicit.
Sponsored-by: On-Waves ehf
Currently the RLC message length that is obtained from the DSP is
reduced by 1 if the last byte of the buffer includes spare bits.
While this worked well with GPRS, these bits are being used to
encode RLC blocks in EGPRS mode. Thus this last byte must not be
chopped off. The functionality of the code is not affected by this,
since the modified length value is not used.
This commit adds GprsCodingScheme::usedSizeDL/UL to return
the number of bytes needed to encode the message block. If there are
single bits at the end that are to be used (EGPRS), the functions
return the number of full bytes plus 1 (which is the buffer size
reported by the DSP and returned by sizeUL/sizeDL). The commit also
removes the len parameter from rcv_data_block_acknowledged.
Sponsored-by: On-Waves ehf
These struct names are more specific than necessary. They are used
for GPRS (uplink) already. In downlink direction, only a few fields
will be added to the header struct. Add addition,
gprs_rlc_ul_header_egprs does not map directly to an encoded
header, like many other 'header' structs do.
Change the names to fit both modes and both directions:
gprs_rlc_ul_header_egprs -> gprs_rlc_data_info
gprs_rlc_ul_data_block_info -> gprs_rlc_data_block_info
Sponsored-by: On-Waves ehf
Currently there is only a mod_sns() method which is being used in
expression like bsn_expr & win.mod_sns(). This only works, because
it is known that mod_sns() is (sns() - 1) where sns() in turn is
always 2^n. This is error prone, hard to read, and relies on window
specifics that should be kept inside the respective module.
This commit adds a mod_sns(uint bsn) method to gprs_rlc_ul_window and
gprs_rlc_dl_window, that encapsulates and hides this optimized
computation.
Sponsored-by: On-Waves ehf
This commit removes the code that is no longer used due to the commit
"Use a single PDCH rcv_data_block method for GPRS and EGPRS".
Sponsored-by: On-Waves ehf
The current rcv_data_block_acknowledged_gprs method is tightly
coupled to GPRS.
This commit adds variants of the involved methods that support
EGPRS and GPRS RLC encodings likewise.
Sponsored-by: On-Waves ehf
Currently gprs_rlc_ul_window::receive_bsn calls raise_v_q and returns
the number of RLC data blocks that can be taken from the queue. This
does not fit the EGPRS feature to put 2 independant data blocks in a
single RLC block.
This commit removes raise_v_q from receive_bsn, hence it must be
called explicitely to get the number of processable data blocks.
Sponsored-by: On-Waves ehf
This commit renames rcv_data_block_acknowledged to
rcv_data_block_acknowledged_gprs to separate it from EGPRS data block
decoding.
Sponsored-by: On-Waves ehf
This commits adds the GprsMs::update_l1_meas() and GprsMs::l1_meas()
methods to store and access the measurement values. The internal
state is updated depending on which values are actually set.
In addition, these values are shown in the output of the 'show ms
imsi|tlli' command.
Sponsored-by: On-Waves ehf
Currently only the RSSI value is passed to the upper layers. Other
values like TA and BER which are needed for TA update respectively CS
selection are not propagated.
This commit introduces and passes a struct that contains a set of
measurement values.
Sponsored-by: On-Waves ehf
sivasankari
Daniel Willmann