This simpliefies the allocation process.
tfi_alloc is responsible to allocate a TFI, not a time slot.
The first time slot available depends on multislot class and on other
ongoing TBF (concurrent TBFs), so it is part of the allocation
algorithm to select it.
In order to use this feature, sysmoBTS requires option "-M", otherwise
the traffic is forwarded through socket interface.
This is essential, if PCU runs on processor of sysmoBTS. The reaction
time and delay of PDTCH frames could heavily degrade proper packet flow.
The slots are choosen in a way that later selection of slots for
concurrent TBFs will have the same downlink/uplink control channel
(PACCH).
This is required for polling acknowledge of new TBF assignment on PACCH.
The MS will always have the same PACCH uplink slot while beeing in packet
transfer mode.
Original code: c7e7f6868b
(The code was committed earlier, but got lost somehow.)
I added IMSI, so the paging request is sent in correct paging group.
Also I excluded rest octets from pseudo length.
It is tested and it work.
Some MS will leave packet transfer mode, if TAI is given, but no timing
advance control messages are sent on PTCCH. This could results in
permanent loss of larger packets.
It is quite essential. It shows how TBFs are related and helps to estimate
states and timers (timeouts) of the MS.
In order to use it, it must be defined by a switch at gprs_rlcmac.h.
This is required, since we may change slot allocation. In case of a
change, we do not want to be unable to change, if the same TFI on one of
the other slots is already in use by a different TBF (having same TFI, but
on different slot).
It is mandatory to support it because MS may request a single block.
In this case the network must assign a single block.
It is possible to force single block allocation for all uplink requests
on RACH. (VTY option)
Both flags can be used to determine wether assignment must be sent on PCH
or on AGCH. Before contention resolution is done, mobile will ignore
downlink assinment. When final uplink acknowledge was sent, the mobile
will go back to PCH after reception of akcnowledge.
If lifetime expires of queued LLC frames, they are discarded. The number
of discarded frames and the sum of their octets are reported to SGSN
via LLC-DISCARDED message.
The lifetime can be overridden via VTY. The value can be centi-seconds
or "infinite".
In order to do downlink assignment during uplink TBF, the content
resolution must be completed. It is completed when the first Packet
Uplink Ack/Nack message is transmitted to the mobile.
In order to send control blocks to MS and receive control blocks from MS
(polling), it is required to select one timeslot that the MS must be
able to send and receive. The allocation algorithm must take care of
selecting that slot.
The new data structure is required to define slot/TFI assigment for MS
with multislot capability.
Now there are two lists for TBFs: uplink and downlink. It is possible to
have different TBFs with same TFI in the same direction, as long as they
are assigned on different timeslots.
See tbf.txt for description.
Note: This does not implement any multislot support. It defines the new
data structure. Currently only the first slot is assigned.
Merge is based on jolly_new branch with two modifications.
1. Modified PCU L1 interface.
pcu_l1_if.cpp - common functions for tx and rx messages on L1 interface.
sysmo_sock.cpp - SYSMO-PCU socket functions.
openbts_sock.cpp - OpenBTS-PCU socket functions.
pcuif_proto.h - L1 interface's primitives.
2. Modified encoding of RLC/MAC Control messages, now we use structures and encode_gsm_rlcmac_downlink() function for encode control blocks (without hand-coding).
The hack for resetting BSSGP instance is removed and now performed
whenever the NS state changes to UNBLOCKED.
The BSSGP instance is now created only once, as it should be.
Received STATUS messages are ignored as they should be.
The creation and destruction of BSSGP/NS instances is now handled by
layer 1 interface alone.
These informations provide RAI, timers, counters and other attributes to
the BSSGP and RLC/MAC processes.
The attributes are stored in gprs_rlcmac_bts global structure.
Added functions:
- gprs_bssgp_pcu_rx_paging_ps() for handling paging message from BSSGP;
- write_paging_request() for writing paging request message;
- gprs_rlcmac_paging_request() and pcu_l1if_tx_pch() for sending paging request message to BTS.
The OpenBTS socket functions are moved from main to pcu_l1_if.cpp.
New sysmo_l1_if.cpp is introduced. It used special unix socket interface
to connect to sysmo-BTS. This is required to access CCCH/RACH and info
about cell layout. Traffic is also forwarded via this interface, but
it direct access of L1 baseband DSP will be added soon.
In order to handle ready-to-send requests above l1_if, the transmit
queue (for downlink blocks) is moved to gprs_rlcmac.cpp.
The TBF instance additionally holds TRX and TS info, but this is only
a hack currently. TBF instance requires more details about allocated
ressources in the future.
Added functions for TBF allocation, establishment, data transfer and release management.
Modified TBF structure, added list for several LLC PDUs in one TBF.
Added function gprs_rlcmac_tx_llc_pdus() providing transmission of several LLC PDUs in one TBF to MS.
Andreas Eversberg
Holger Freyther
Harald Welte