A new nacc_fsm is introduced per MS object, with its partner priv
structure struct nacc_fsm_ctx, which exists and is available in the MS
object only during the duration of the NACC procedure.
The NACC context is created on an MS whenever a Pkt Cell Change
Notification is received on Uplink RLCMAC, which asks for neighbor
information of a given ARFCN+BSIC.
First, the target ARFCN+BSIC needs to be translated into a CGI-PS
(RAC+CI) address. That's done by asking the BSC through the Neighbour
Resolution Service available in osmo-bsc using the CTRL interface.
Once the CGI-PS of the target cell is known, PCU starts a RIM RAN-INFO
request against the SGSN (which will route the request as needed), and
wait for a response containing the SI bits from the target cell.
After the SI are received, the scheduler is instructed to eventually
poll a TBF for the MS originating the CCN, so that we can send the SI
encapsulated into multiple Packet Neighbor Cell Data messages on the
downlink.
One all the SI bits are sent, the scheduler is instructed to send a
Packet Cell Change Continue message.
Once the message above has been sent, the FSM autodestroys itself.
Caches are also introduced in this patch which allows for re-using
recently known translations ARFCN+BSIC -> CGI-PS and CGI-PS -> SI_INFO
respectively.
Change-Id: Id35f40d05f3e081f32fddbf1fa34cb338db452ca
This code doesn't do anything yet app-related with the received RIM
messages, but already provides the initial infrastructure to handle them
in the future, and does first checkings.
Related: SYS#5103
Change-Id: Ia0ade0e97ea781ec655439c008b6cefaf3e90dec
Previously all TBF-related events were logged as part of DRLCMAC which
is too broad to make it practically useful due to excessive amount of
log messages generated. Introduce dedicated log categories for
TBF-related events. Adjust test output as necessary.
Change-Id: I64d660e5971263d5c63d2ba95d50625c16a594aa
Currently there is not support for Network Service (NS) logging.
This commit adds the missing definitions and sets the default level
to INFO. Further configuration can now be done with the 'logging
level ns' VTY command.
Sponsored-by: On-Waves ehf
The measurements include:
- DL bandwidth usage
- DL packet loss rate
- DL measurements by mobile
- UL measurements by BTS
In order to receive DL measurements from mobile, it must be enabled via
system information message at BSC.
In order to use this feature, sysmoBTS requires option "-M", otherwise
the traffic is forwarded through socket interface.
This is essential, if PCU runs on processor of sysmoBTS. The reaction
time and delay of PDTCH frames could heavily degrade proper packet flow.