If the downlink BSSGP didn't contain a RA Capabilities IE, both
MS class values are 0. The phone will send valid RA Caps later on.
Currently in that case, the downlink TBF is not established
if EGPRS is enabled.
Just force egprs_ms_class to 1 if EGPRS (only) is enabled.
Sponsored-by: On-Waves ehf
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
Currently GPRS is always used for downlink, which violates TS 44.060
(concurrent TBF must have the same mode).
Enable EGPRS mode for downlink if the EGPRS MS class is != 0 and
EGRPS has been enabled.
Note that EGPRS Ack/Nack handling is not yet implemented, so enabling
EGPRS will not work still. But we will now get EGPRS DL ACK/NACK
messages now from the MS.
Sponsored-by: On-Waves ehf
Add an use_egprs parameter to write_packet_downlink_assignment
and add the EGPRS related fields if it is set to true. The
window size is fixed at 64 blocks, link quality measurement
reports have been disabled, and the other optional fields are not
present.
Sponsored-by: On-Waves ehf
Currently the TBF and MS object use a plain integer value
(current_cs) to manage the coding scheme. This makes it difficult to
support the MCS schemes. GprsCodingScheme supports a partial ordering
of these values (CS and MCS) and provides safe increment and
decrement methods.
Use the GprsCodingScheme type instead of integer for cs fields and
variables. Add a 'mode' to GprsMs which can be set to either GPRS,
EGPRS, or EGPRS_GMSK which also set the initial values of
current_cs_ul/dl. Select the mode based on max_mcs_ul and max_mcs_dl.
Sponsored-by: On-Waves ehf
LListHead does basically the same like llist_pods, but more C++ish
and with type safety.
This commit turns the former list field of gprs_rlcmac_tbf into a
private field, provides accessors, moves the related code from
pcu_vty.c to pcu_vty_functions.cpp, and removes the llist_pods
type and related code.
Sponsored-by: On-Waves ehf
This function is similar to the show_ms function already present in
the target file. Since the TBF lists will be turned into LListHead
based lists, they will get an iteration function in
pcu_vty_functions.cpp, too.
Sponsored-by: On-Waves ehf
Currently casts from gprs_rlcmac_tbf to gprs_rlcmac_ul_tbf and
gprs_rlcmac_dl_tbf are done by using static_cast. This doesn't provide
protection against converting a gprs_rlcmac_ul_tbf pointer to a
gprs_rlcmac_dl_tbf pointer and vice versa.
This commit provides two functions as_ul_tbf and as_dl_tbf, that
behave similar like dynamic_cast but use the direction field instead
of RTTI.
Sponsored-by: On-Waves ehf
Currently the GPRS parameters are used, which is ok for the WS but
not for the SNS.
This commit uses RLC_EGPRS_SNS and RLC_EGPRS_MIN_WS for the window
configuration.
Sponsored-by: On-Waves ehf
Currently the EGPRS mode is enabled in setup_tbf depending on the
values of egprs_ms_class and bts->egprs_enabled (both must be != 0).
This makes it difficult to set different values (like window
parameters) depending on the direction.
This commit moved the initialisation part to tbf_alloc_ul_tbf und
just leaves the setting of the ms_class to setup_tbf.
Sponsored-by: On-Waves ehf
Currently the gprs_rlc_dl_window and gprs_rlc_ul_window do not have
constructors, but need to get initialized explicitly.
This commit adds constructors to both classes and removes explicit
external initialization code.
Sponsored-by: On-Waves ehf
Currently gprs_rlcmac_tbf::extract_tlli takes care of decoding and
the TBF update. These are really different things and doing the
decoding in extract_tlli makes EGPRS support more complex.
This commit moves the TBF state related part into a new method
gprs_rlcmac_tbf::set_tlli_from_ul.
Sponsored-by: On-Waves ehf
Enable the TBF to use EGPRS if the bts->egprs_enabled config variable
has been set via the VTY "egprs" command and if the MS has signaled a
EGPRS multislot class.
Tell the MS to use EGPRS if the condition above holds.
Note that this will cause the MS to use EGPRS RLC block formats for
further messages which are not yet understood by the PCU.
Sponsored-by: On-Waves ehf
Add the following methods to gprs_rlcmac_tbf:
- is_egprs_enabled
- enable_egprs
- disable_egprs
Also show the value of the flag in name() by displaying "EGPRS" if
it is set.
Sponsored-by: On-Waves ehf
Currently the Encoding::write_packet_uplink_assignment method only
supports the GPRS variant of the message.
This commit adds the missing EGPRS variant to the encoder.
Sponsored-by: On-Waves ehf
When a timeout has occured several times, the procedures handled by
poll_timeout are aborted. This happens when the number of repetitions
exceed N3105. Currently only the timeouts themselves are counted.
This commits adds counters that are incremented if a procedure has
really failed.
New counter:
- rlc.ass.failed: Count failing UL and DL assigments via PACCH
- rlc.ack.failed: Count failing DL Ack/Nack requests
Sponsored-by: On-Waves ehf
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
Currently when a second MS object has been created for an MS, because
the TLLI was not known yet, the will be detected in
gprs_rlcmac_tbf::extract_tlli and the two objects will be merged by
update_ms. But when the dl_tbf is moved from the old to the new
(second) MS object, the old MS object can get idle and be removed
before the object are merged. This can cause LLC frame loss when the
MS object is deleted immediately after getting idle (no timeout
configured).
This commit adds a guard to keep the MS object until extract_tlli has
been executed.
Sponsored-by: On-Waves ehf
This reverts commit e91bd3babd.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
This commit adds the relevant frame number to the "poll timeout"
logging message. In addition, logging is added to the places where
poll_fn gets set.
The goal is to track down the source for frequent "poll timeout"
messages.
Sponsored-by: On-Waves ehf
Currently when allocating tbf_alloc_ul_tbf or tbf_alloc_dl_tbf
objects, the allocated memory area is pre-initialised by talloc_zero
before the C++ constructors are called. This is not recognised by
Coverity, since there is no talloc model file yet. Thus Coverity
complains about missing initialisers.
On the other hand, it is still planned to convert the TBF classes
into real C++ ones. So instead of silencing Coverity directly, this
is an opportunity to do it the C++ way.
This commit adds initialisers and initialisation code for all
members that relied on talloc_zero. The corresponding calls to
talloc_zero are replaced by calls to talloc to give ASAN/valgrind
a chance to detect future initialisation errors. Some initialisation
code is also moved from setup_tbf to the constructors, notably the
initialisation of the bts pointer.
Fixes: Coverity CID 1320604, 1320605, 1320606
Sponsored-by: On-Waves ehf
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
The TBF object are currently created by using talloc_zero/talloc_free
directly from plain functions. Therefore C++ constructors and destructors
are not called. So the only initialisation that is done is setting
every member to 0. Non POD members do not have their constructors
called either, which makes it impossible to use the current LListHead
class for real members when the LListHead::m_back member has to be set.
This commit changes the TBF allocation functions to call the
corresponding C++ constructor after the call to talloc_zero and to
register the C++ destructor with the talloc context, so that is is
called before talloc_free actually frees the memory.
With this change, non-POD members and custom
constructors/desctructors can be used with gprs_rlcmac_tbf,
gprs_rlcmac_dl_tbf, and gprs_rlcmac_ul_tbf.
Note that this change is only a single step of the plan to turn the
TBF classes into real C++ classes.
Sponsored-by: On-Waves ehf
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
Currently the merging of the meta information (MS class, IMSI) takes
place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it
difficult to merge the internal state and does not directly relate to
TBFs anyway.
This commit moves this into a new method GprsMs::merge_old_ms.
Sponsored-by: On-Waves ehf
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
This commits adds three poll timeout counters
- RLC Assign Timeout
- RLC Ack Timeout
- RLC Release Timeout
to help diagnosing to cause for these events. There seems to be an
increased rate of these when a PDCH is shared by multiple TBFs.
Sponsored-by: On-Waves ehf
This reverts commit 2272a83a13b57ea7e99fe96ac76e4ad892e19e90.
The modification is no longer needed, since the call to update has
been removed from reuse_tbf().
Conflicts:
src/tbf_dl.cpp
Sponsored-by: On-Waves ehf
Since set_ms() is caled on the new DL TBF, the old DL TBF loses the
reference to the MS object. This will lead to a segfault, when
update() is called in reuse_tbf().
This commit adds an optional GprsMs* parameter to update() and uses it
for the slot allocation.
This fixes a TbfTest crash that would otherwise occur after applying
the next commit.
Sponsored-by: On-Waves ehf
Currently the PDCH object do not know anything about the TBFs using
them. To make the slot allocation load dependant, at least some
numbers are required.
This commit adds TBF counters (one per direction) and the related methods
attach_tbf, detach_tbf, and num_tbfs to gprs_rlcmac_pdch.
Sponsored-by: On-Waves ehf
Currently the code that creates the MS objects with tbf.cpp is
duplicated.
This commit moves the corresponding code into a new method. Since
there is no TLLI available there, the GprsMsStorage::create_ms method
has been refactored into two variants: one with TLLI/direction and
one without.
Sponsored-by: On-Waves ehf
Currently the MS object are created when the TLLI gets known.
Therefore some information (TA, MS class) must be stored in the TBF
itself and is copied to the MS object later on. This would get even
more complex, if the allocation algorithms were extended based on
this scheme.
This commit ensures, that an MS object will always be created on TBF
allocation, even if the TLLI is not yet known. These 'anonymous'
objects are still managed by the MS storage. To avoid dangling
entries without a TLLI there (which cannnot be retrieved anyway), the
timer in the MS objects is not started after all TBF have been
detached, so that they get deleted immediately in that case.
Note that an MS object can still be removed (e.g. by replacement)
from an existing TBF, so tbf->ms() can be NULL.
Ticket: #1794
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
This method does not do anything anymore, it's functionality has been
taken over by update_ms.
This commit removes gprs_rlcmac_tbf::update_tlli completely.
Sponsored-by: On-Waves ehf
The gprs_rlcmac_tbf::name() method is generally used to generate log
messages. To avoid the need for an explicit NULL check for the tbf
and to get a consistent text if it is NULL, this commit adds a
NULL check to the method itself so that it can be called with this ==
NULL.
Fixes: Coverity CID 1304680, 1304681
Sponsored-by: On-Waves ehf
Currently the current CS value is stored in the cs field of
gprs_rlcmac_tbf and initialised when it is used the first time.
This commit adds separate fields for UL and DL CS values to the
GprsMs class and provides corresponding getter methods for GprsMs and
gprs_rlcmac_tbf.
Ticket: #1739
Sponsored-by: On-Waves ehf
The ms_class value is a property of the MS and thus belongs to the
GprsMs class. Nevertheless the MS object is created after the TLLI
gets known, so the value still has to be stored in the TBF initially.
This commit add the ms_class value to the GprsMs class and introduces
TBF accessor functions which either access that object or, if that is
not available, the value stored locally.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the enqueued DL LLC messages which have not yet passed to
RLC/MAC encoding are eventually copied from one TBF to the next one
(see gprs_rlcmac_dl_tbf::reuse_tbf). Since the enqueued LLC messages
are related to a specific MS, they should be stored at that layer.
This commit moves the gprs_llc_queue object to GprsMs and changes the
TBF's accessor methods accordingly. The LLC copying code is removed
from gprs_rlcmac_dl_tbf::reuse_tbf().
Sponsored-by: On-Waves ehf
Currently the gprs_llc class handles both LLC queueing and the
partition into smaller pieces for RLC/MAC encapsulation. This hinders
the separation of TBF and MS related data, since LLC queueing belongs
to the MS related code while the RLC/MAC encoding/decoding belongs to
the TBF layer.
This commits takes the LLC queueing related methods and members and
puts them into a new class gprs_llc_queue. It puts the queueing
object into gprs_rlcmac_tbf and adds accessor functions. The
implementation in tbf.cpp and tbf_dl.cpp is adapted accordingly.
Ticket: #1674
Sponsored-by: On-Waves ehf
This commit sets the MS timeout when the MS object is created. The
value is taken from the ms_idle_sec field in gprs_rlcmac_bts which
can be changed by the VTY commands shown below.
The following VTY commands are added to the config-pcu node:
- ms-idle-time <1-7200> Set the timeout in seconds
- no ms-idle-time Disable the timeout
Another timer that is related is T3314 (Ready Timer, default 44s, GSM
24.008, 11.2.2) which requires the SGSN to use paging after its
expiry. Longer timeouts can help if adaptive coding scheme selection
is used (not yet implemented). On the other hand, measurement values
(TA, signal quality) can get invalid after some time, especially with
a moving MS. So a value slightly above T3314 is probably a good value
to start with.
Sponsored-by: On-Waves ehf
The TA value rather relates to an MS and not to a single TBF. So all
TBFs share the same TA value. Currently the TA value is stored per
TBF and eventually copied from an old TBF to a new one. It is in
general only passed with an RACH request when the TLLI and thus the
MS is not yet known.
This commit adds a TA member to the GprsMs class and uses that one
when the TBF is associated to an MS object. Since the TBF is not
always associated with an MS object (after RACH or when it has been
replaced by another TBF), the TA value is still stored in each TBF
and that value is used as long as no MS object is being associated.
Sponsored-by: On-Waves ehf
Currently a new TBF is chained to an existing older one, either of
the other direction (active or releasing) or of the same direction
(releasing). This does not work properly work if and uplink and a
downlink TBF are being established at the same time while an old TBF
is being released. In that case, one of them is thrown away and the
pending procedure is cancelled.
The chaining is no longer necessary since the GprsMs objects have
been introduced which keep track of the active TBFs.
This commit removes the TBF members m_new_tbf and m_old_tbf and the
related methods and code paths.
Note that a new TBF can replace an older TBF entry of the same
direction within an MS object when it is associated with an MS (e.g.
by TLLI or because it is assigned via another, already associated
TBF). In that case, the old TBF is no longer associated with an MS
object.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the BTS::trigger_dl_ass() method assigns the IMSI to the MS
object. This should be (and is already) done earlier where the MS
object is retrieved/created.
This commit removes the corresponding code along with the 'imsi'
parameter from trigger_dl_ass.
Sponsored-by: On-Waves ehf
Currently the IMSI is stored in the TBFs. Since it directly refers to
an MS, it should rather be stored in an MS object.
This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs,
changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated
MS object, and adds getter and setter to GprsMs. Before changing the
IMSI of the associated MS object, assign_imsi() checks if there is
already another MS object with the same IMSI and eventually resets
the IMSI of that one. So using update_ms() and assign_imsi() ensures
that there are not two MS object entries is the storage with the
same TLLI or the same IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Jacob Erlbeck