The PCU uses a 16 bit integer value as paging group which does in fact
not really resamble the paging group. Instead it encodes the last three
digits of the IMSI from which the paging group can be calculated. The
value is then eventually converted back to Ascii-digits and then sent
over the PCU-IF interface. Lets get rid of this weird conversion and
use the IMSI directly.
Change-Id: I40d7fc14c9591b3de091e425faaf325421c70a0e
First commit towards trying to have alloc algorithm as isolated as
possible from others parts of the code trying to avoid state changes on
data structures.
Change name also because the alloc_algo not only allocated TS, but TFIs
and USFs.
Change-Id: I33a6c178c64a769f05d3880a69c38acb154afa62
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I4a49dbeeec89b22624c968152118aecf8886dac6
Since a while ago, the data architecture was changed so that TBF is
guaranteed to always have a MS object associated. Hence, it makes no
sense to pass the MS object as a separate param as we can take it from
tbf object and makes code less confusing.
Change-Id: Idc0c76cf6f007afa4236480cdad0d8e99dabec5f
This patch doesn't really tests whether osmo-pcu can work on a multi-bts
environment, but it prepares the data structures to be able to do so at
any later point in time.
Change-Id: I6b10913f46c19d438c4e250a436a7446694b725a
There's no real use of C++ in that file, and it causes problems when
using llist_head entry macros in future patches adding initial support
for multiple BTS in PCU object, so let's move it to plain C.
Change-Id: Ic771a89fd78b5e66151a5384f0ff6a8895589466
Those files are not really being used other than for calling
get_current_fn() which is just a placeholder to call
bts_current_frame_number on the global bts object.
Change-Id: I6d50a8c15c1de5e2a308a24b313a7776f94ae54f
Let's create the MS object early if doesn't exist and fill in the
information, so that we can operate on it in an early way (for instance,
logging macros), this way it's easier to trace the lifecycle of
subscribers.
Change-Id: I3ec7eb970310698dd228ae6ad65ec5ca833bab3f
In get_paging_mi(), before this, an encoded buffer of Mobile Identity bytes is
returned. Code paths following this repeatedly decode the Mobile Identity
bytes, e.g. for logging. Also, in get_paging_mi(), since the TMSI is read in
from a different encoding than a typical Mobile Identity IE, the TMSI was
manually encoded into a typical Mobile Identity IE. This is essentially a code
dup of osmo_mobile_identity_encode(). Stop this madness.
Instead, in get_paging_mi(), return a decoded struct osmo_mobile_identity. Code
paths after this use the struct osmo_mobile_identity directly without repeated
decoding.
At the point of finally needing an encoded Mobile Identity IE (in
Encoding::write_paging_request()), do a proper osmo_mobile_identity_encode().
Since this may return errors, add an rc check for the caller of
write_paging_request(), gprs_rlcmac_paging_request().
A side effect is stricter validation of the Mobile Identity passing through the
Paging code path. Before, invalid MI might have passed through unnoticed.
Change-Id: Iad845acb0096b75dc453105c9c16b2252879b4ca
Original file from wireshark.git (packet-gsm_csn1.c) is being built and
maintained as a C file. There's no real need for us to maintain it as a
C++, and doing so will make both files derive over time (as already
happened). Let's keep it as a C compiler (which btw seems to be more
strict) to make it easier to port patches back and forth wireshark.git.
Take the chance to move some declarations we added to csn1.h to be able
to build it out of wireshark. Let's keep those in a separate header file
to ease looking for differences.
Change-Id: I818a8ae947f002d35142f9f5473454cfd80e1830
P-TMSI is optional IE, but IE is mandatory and hence always available.
Since the encoding is actually a Mobile Identity, the IMSI is used in
case P-TMSI is not available.
Change-Id: I4dbf8db04e81f98352a42ce34a5d91326be9bfd1
Receive an Application Information Request from the BTS via PCU
interface. Construct a Packet Application Information message from it
(3GPP TS 44.060 11.2.47) and send it to all MS with active TBF.
The TTCN-3 test infrastructure to test this feature is not quite ready
yet, so I've added C unit tests instead.
Related: OS#4048
Change-Id: Ie35959f833f46bde5f2126314b6f96763f863b36
* drop unused parameters (from both functions and structs)
* document used parameters and return values
* tighten types used for parameters
* use consistent formatting
Tests are adjusted accordingly but test results are left untouched to
avoid regressions.
Change-Id: I39d81ab64ff790b9c4c2d0312a574485cd83e755
Related: OS#2282
ARFCN is already part of TRX struct so there's no need to supply it
explicitly in a separate parameter. I've tested and those are the same
anyway.
Change-Id: I8e975c52cbc819427880093b1e5371fe1f8ce460
Currently the values Bmax/R default MS are computed under the
assumption than min(4, N_PDCH) DL slots are allocated for an MS, even
if multislot assignment is not enabled.
This commit changes the computation to assume 1 DL slot if algorithm
A is selected or the dynamic algorithm is used and has disabled
multislot assigment due to high load.
Sponsored-by: On-Waves ehf
The idea behind this meta algorithm is to automatically select one of
the other algorithms based on the system state. Basically algorithm B
will be selected if the PDCH usage is low to improve throughput and
latency. Algorithm A will be selected to support more concurrent MS.
This commit adds a first simple state-less version of this algorithm
that always tries B first and only if that fails A is tried
afterwards.
The following VTY command is added to the 'pcu' node:
- alloc-algorithm dynamic
Ticket: #1934
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
The bandwidth calculation as well as loss report is only done for DL TBF
so move everything related to that in there.
Ticket: SYS#389
Sponsored by: On-Waves ehf
This approach is somehow flawed. We need/want to debug problems on
systems with real traffic and re-compiling it with debug_diagram
is not an option. All internal logging needs to be expressive enough
so we can understand what is going on (e.g. create a script to
post-process the output).
Move the method into the PDCH. Extract the finding of TLLI into a
new class called Decoding. Move the assemble and forward LLC frames
into the TBF as it is poking in the internals of the TBF.
The list belongs to the BTS. This makes cleaning this up more easy
and establishes a hierachy of resources that start from the BTS. The
debug_diagram code is now broken.
The PollController is a friend of the SBAController and is allowed
to access the internal list. The list is hidden from everyone else.
This is done because the calculation of timeout should belong into
the PollController and not into the SBAController.
Only the gprs_rlcmac_pdch will manipulate the paging list now. There
can be various more refactorings of the code but they can be done
later. E.g. on memory allocation failure we can continue instead
of leaving the code, we should also set any_tbf only after things
have been paged.
Rely on packet_paging_request returning NULL in case the queue
is empty. We should move the write_packet_paging_request into
a separate file/object as well.
Max
Philipp Maier
Pau Espin
Oliver Smith
Daniel Willmann