The log message after the nullpointer check for conn tricks Coverity
Scan into detecting a nullpointer deref.
Include the log message into else branch to state the program flow
more clearly
Fixes: Coverity CID#178656
Change-Id: If6e962f4033c955ecd3539a719031a83c9b6205a
The reset context contains a string buffer to allow for setting
a human readable name, that is then displayed in the logs. Since
OSMO-FSMs already have such a feature there is no need for an
extra name variable.
Use LOGPFSML and the name parameter of osmo_fsm_inst_alloc()
to display the name of the FSM
Fixes: Coverity CID#178664
Change-Id: I5b051606791c5e085ca6bb1be20592127d48ceb5
Wen there's no SMPP support compiled in, and routing was successful,
we shouldn't return an uninitialized value.
Change-Id: I4abbbb5ab336a7e8da08d682f396baec3b56fa3a
Fixes: Coverity CID#174176
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: I34708c73d8084db4e6c83a39be8fdaeaa492d743
When using ciphering, the TMSI is an important part of the ciphering. To guard
against users forgetting to set 'assign tmsi' in the config and compromising
their ciphering unknowingly, the default should be to use a TMSI.
To optimize in an unencrypted network, 'no assign tmsi' config can still switch
off TMSI use.
Change-Id: If115e95bebc314bedb50faf3993b52071fee5c1e
The name auth_tuple_max_use_count suggests that if I want to use each auth
tuple exactly once, I need to set it to 1. Curiously, so far you need to set
to intended uses - 1.
Reflect this in its name by renaming to auth_tuple_max_reuse_count.
I first considered to not rename but change the if-conditions so that == 1
means each tuple is used once, and upon struct vlr allocation, set the default
to 1. That would also logically entail that setting to 0 means to re-use
vectors infinitely often, like now a value < 0 does. That means, when
allocating a vlr struct zeroed out, we would by default have the most
dangerous/unsafe configuration. It's no problem to set a default to 1 upon
allocation, but by renaming the variable instead, we get safer alloc-zero
behavior and don't need to change any conditionals in the code (even though the
patch ends up considerably larger from all the renaming).
Change-Id: I0b036cae1536d5d6fb2304f837ed1a6c3713be55
libmsc/a_iface.c and libmsc/a_iface_bssap.c still include
osmocom/sccp/sccp_types.h to get access to enums defining SCCP
cause values. Until that is resolved, we have to keep the build
dependency to libosmo-sccp-dev
Change-Id: I957dcb2bcce216d0fd81a58bfe869aca0e4624a8
Related: OS#2601
osmo-msc doesn't use any API/symbols of libasn1c directlry. Rather,
we use libosmo-ranap which in turn uses libasn1c. Let the linker
work out that dependency.
This fixes the following dpkg-shlibdeps warning:
Change-Id: I2f840884d8f1cc542de1e26acd3d4215bd2fd899
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/osmo-msc/usr/bin/osmo-msc was not linked against libasn1c.so.0 (it uses none of the library's symbols)
A FSM doesn't need "FSM" in its name, as it is obvious that it is a
FSM. Also, having two that are called RESET is confusing, so let's
try to come up with better names.
Also, after Change-Id I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2 in
libosmocore, we now enforce that no FSM identifiers contain spaces
or other illegal characters.
Closes: OS#2593
Change-Id: I858a81b8a4e01b2e802e3159f2835e5ca515953d
Currently, OSMO_ASSERT() is defined such that it ends in a semicolon, hence an
added ';' is redundant. However, the usual way this kind of macro should be
defined is
#define OSMO_ASSERT(x) do { ... } while(0)
so that the compiler requires a trailing semicolon.
To prepare for such a change possibly coming up in libosmocore, add ';' to all
OSMO_ASSERT() users.
Change-Id: Ic79c8b8f98a7f3bef761751d55a7e6125cf2c46d
In vlr_core.h, "pre-declare" a struct used in function declaration.
In vlr_lu_fsm.c, gsup.h is not used, drop the #include.
Change-Id: I61d793c3001abbe6d381be1ae0bb350b07403e88
Add required msgb_free() to vlr_gsupc_read_cb().
Adjust msc_vlr_tests.c gsup_rx() to *not* free the msgb again after
vlr_gsupc_read_cb() did.
Related: OS#2476
Change-Id: I347c53f57a7fa79921aed3f6e42599841acf27c0
Since Ifb8f3fc2b399662a9dbba174e942352a1a21df3f libosmo-mgcp-client has its own
definitions in mgcp_common.h, which conflict with legacy_mgcp/mgcp.h. This
cross-inclusion to support libosmo-mgcp-client is no longer necessary.
In the future, including libosmo-mgcp-client together with libosmo-mgcp will be
made possible, but not with libosmo-legacy-mgcp (because we don't care enough).
That is why including libosmo-legacy-mgcp headers would cause build failure.
Depends: Ifb8f3fc2b399662a9dbba174e942352a1a21df3f
Change-Id: I8e3359bedf973077c0a038aa04f5371a00c48fa0
The MSC should not fiddle with low-level SI details like rest octets
anyway. Unfortunately simply removing the header is impossible as it
causes massive fallout due to missing includes. Fixed it as well.
The only other parameter which required removal is cell_ro_sel_par which
is not referenced anywhere in the code anyway.
Change-Id: Ibff77330de056fad4288cd4c48d016aad8105354
I would have liked to add a regression test to verify this, but currently there
is no easy way to run CTRL tests and at the same time have access to the
osmo-msc in a way that simulates an attached subscriber.
Related: OS#2285
Change-Id: I003542b208ecf3713e9e67712d84ccb4c61af14e
After osmo-mgw changes I8e0b2d2a399b77086a36606f5e427271c6242df1 and
I99f7faab637cfcc22ece64a1dbcbe590f2042187, apply linking of new
libosmo-mgcp-client and renames to drop the "gw" from mgcp_client_*.
Also rename the gsm_network.mgcpgw to mgw, to indicate that the MGCP client is
used to contact the MGW (Media Gateway).
Depends: I8e0b2d2a399b77086a36606f5e427271c6242df1 (osmo-mgw)
I99f7faab637cfcc22ece64a1dbcbe590f2042187 (osmo-mgw)
Change-Id: I093ad02ca0e532f659447c785e09678b3e6f220d
The function gsm0408_dispatch() accepts a message buffer pointer
and accesses the l3h pointer. Even in a properly allocated
message buffer, this may lead into a segfault if the user forgets
to set the l3h pointer. This commit adds assertions to popup a
more expressive error message.
Change-Id: I43bd9bd1c170559aaa8dacaef25dba090744bcd5
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
Currently the force_realloc feature is turnd on and of in a
hardcoded way. This patch makes the option available via VTY.
Change-Id: Ic8740512c5ea0766ff6ceb1c28b9c2b3fe46e75f
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the NITB on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: Iea6804325a6575ceab5edfd28dd20249462f143b
This option was present in very early versions of the NITB, but
at least since 2011 it is no longer supported. It's still listed
in --help output, which is wrong.
Change-Id: I1d2cceb588ec5fb34ec5e2c05a7d8c93310bee88
Set the time on the status report to the time the message was delivered, as
this may not be the same as the time when we are delivering the report to the
originating MS.
Change-Id: I9056429d40bf02731f004b7833f1de45a0d1add8
libsmpp34 already converts received TLV integer values to native
endianess in libsmpp34_(un)pack.
Converting them again at receive time swaps the 2 bytes of
user_message_reference, then using a wrong value. As GSM03.40 spec
uses only 1 byte for the id, then only the high byte of the initial
value is used and eventually sent back to the ESME. Again, at that time,
htons() is not needed because libsmpp34 already handles that part.
See OS-#2429 for more details.
Change-Id: If748548a4a223e529a1110c89e483b599b406e8b
I already stumbled into 2 compilation environments which had Werror
enabled for -Wmaybe-uninitialized and the build failed, so let's
workaround this warning.
| smpp_openbsc.c: In function 'handle_smpp_submit':
| smpp_openbsc.c:216:9: error: 'sms_msg_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
| memcpy(sms->user_data, sms_msg, sms_msg_len);
| ^
| smpp_openbsc.c💯15: note: 'sms_msg_len' was declared here
| unsigned int sms_msg_len;
| ^
| cc1: some warnings being treated as errors
Change-Id: I0901ddadb5f72e1585cb1797ac22c8ab95e83146
gsm_04_11.c sms_report_alloc()
Use the sms->text, not the sms->user_data to construct the report body.
This also prevents the potential output of non printable characters to
the log and or vty.
Change-Id: Id51bc9483ad6f52d6da74135605cfd12434c7c96
gsm_04_11.c: gsm340_gen_sms_status_report_tpdu()
When we construct the status report PDU, use sms->src
instead of sms->dst as the destination address
This way we tell the MS that the message was delivered
to the destination and not to itself.
This is relevant for phones that display a textual
representation of the delivery report.
Change-Id: I2d4f87ac777465de9bfb5a775a789a2691755ee9
Use new definitions in libsmpp34 to set the registered_delivery field
accordingly, as provided by I5b3afff1b3b77cccd949e0606914c7ac3ba6114c.
Moreover, do not set this header field to zero if status reports are
off, the deliver_t structure has been already zeroed so this not
required.
Change-Id: Ie78e17323796120f576b9c0e1bc5ccc32da8ee12
In 2015, Jacob moved/copied related functions to libosmocore, but
for some reason didn't remove the copies here. Let's follow-up on
that and remove duplicated code.
The libosmocore commit introducing osmo_apn_to_str() was
8114294bf29ac6e44822c0ae43d4b0819f11b022
Change-Id: I7315ffcbed8a54cca2056f313bb7783ad82d0ee9
We can only print libgtp pdp information if a library context is
attached to this pdp context. This is not always the case,
particuarly during some teardown scenarios.
Change-Id: Ia3184877f9709db65f5f93a98403f2ef5b04a8ca
When converting from GSM_PCHAN_PDCH, we should generate
a RSL channel number IE with the osmocom extension
RSL_CHAN_OSMO_PDCH rather than claiming it is a regular
TCH/F channel.
This is important as this function is used by
osmo-bts, too - and it decides which channel number IE is
put in the GSMTAP header for both GSMTAP tracing as well
as the GSMTAP based osmo-bts-virtual.
In order to avoid any unintended effect on libbsc,
we make sure to modify rsl_ipacc_pdch_activate() to
always use GSM_PCHAN_TCH_F in related RSL message.
Change-Id: Ie34219e64a6d89da4a79f2db8ec73d1909fb8280
In the PDP Context Create from SGSN to GGSN, we include information
about the RAN type (GERAN/UTRAN) and the Cell of the MS. This was
all hard-coded to GERAN, and wasn't updated when we added UTRAN
support to the SGSN.
Change-Id: I6c79e42c5e08b28fe8182555302a5505fbbaa313
Philipp Maier
Harald Welte
Neels Hofmeyr
Neels Hofmeyr
Keith Whyte
Pau Espin