Forward the Kc128 key to the new BSS in BSSMAP Handover Request.
Depends: Ieb6e43eef9e57281d54d4b7c63664668df5aef3e (libosmocore)
Change-Id: Id5ce995a741c8e469a50a0c46e53c06a2378bb7e
Use new API in Cipher Mode Command to prepare for A5/4 support.
Depends: Ib3906085e0c6e5a496a9f755f0f786238a86ca34 (libosmocore)
Related: SYS#5324
Change-Id: Ib238d367b8d5d07b6ab4cb2e48fbf4ce22ca4476
Since recently, osmo-bsc behaves strictly as per specs, meaning it will
only send the "Cell selection indicator after release of all TCH and SDCCH IE"
in RR Channel Release iff:
* "Last Used E-UTRAN PLMN Id" was received in the CommonID sent MSC->BSC
* "Last Used E-UTRAN PLMN Id" was received insider "old BSS to new BSS Information"
in the HandoverRequest sent MSC->BSC.
On the other hand, CSFB_Indicator from ClearCommand MSC->BSC is nw
ignored and not taken into account.
Hence, let's update osmo-msc to also behave correctly by sending the
Last Used E-UTRAN PLMN ID at CommonID tx time to avoid regressions in
CSFB support when running against newer osmo-bsc.
Let's keep sending the CSFB Indicator in ClearCommand as we used too, in
order to keep compatibility with older BSCs (as per spec).
Related: SYS#5337
Change-Id: Ic5f175b179973d0a50d94f00e15f5a3e332605fc
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
ran_peer.c is not the proper place to parse messages, because it should be RAN
agnostic. All parsing and encoding belongs in ran_msg_a.c and ran_msg_iu.c.
Move the Osmux TLV parsing into the is_reset_msg op: add supports_osmux
out-parameter (and add a logging fi pointer). To be able to modify msg->l3h,
also make the msgb arg non-const.
In ranap_is_reset_msg(), always return non-support for Osmux.
In bssmap_is_reset_msg(), return 0 if no TLVs were parsed, 1/-1 if an Osmux TLV
was present/not present.
Update the osmux support flag directly where the ConnectionLess message is
received, so that there is only one place responsible for that.
Related: OS#4595
Change-Id: I1ad4a3f9356216dd4bf8c48fba29fd23438810a7
When msc_ho_send_handover_request() generates the HANDOVER REQUEST
message, it does not populate the call_id struct member.
In ran_msg_a.c the struct member call_id is used, but the
call_id_present flag is not set, which also prevents the call_id being
added to the message
Change-Id: I6b1b55b3f5a3092d9557dc2512020c766a9ff744
Related: OS#4582
The BSSMAP message ASSIGNMENT REQUEST may contain an optional CALL
IDENTIFIER IE. While this IE is optional some BSC implementions may
require it.
Change-Id: I4288f47e4a6d61ec672f431723f6e72c7c6b0799
Related: OS#4582
Actually decode the Codec List (BSS Supported) in BSSMAP, in both the Complete
Layer 3 Information and the Assignment Complete messages.
An upcoming patch improves codec negotiation and requires the BSS supported
codecs, which are so far ignored (which is/was a pity as osmo-bsc goes at great
lengths to compose those IEs).
Change-Id: I66c735c79e982388f06b5de783aa584c9d13569e
Also regard an RTP port as invalid if the IP address is 0.0.0.0.
Achieve this by using osmo_sockaddr_str_is_nonzero() instead of
osmo_sockaddr_str_is_set().
Depends: I73cbcab90cffcdc9a5f8d5281c57c1f87b2c3550 (libosmocore)
Change-Id: I53ddb19a70fda3deb906464e1b89c12d9b4c7cbd
Before:
RAN decode: BSSMAP: Rx BSSMAP DT1 COMPLETE LAYER 3
After:
RAN decode: BSSMAP: COMPLETE LAYER 3
This caught my attention while I was writing up a script to parse osmo-msc
logging to produce ladder diagrams.
Change-Id: I387dde8f2eb3edb35d22ce52dc0ed580978dea36
When an MS returns the IMEISV in the BSSMAP Cipher Mode Complete message in
the Layer 3 Message Contents IE, do not re-invoke the decode_cb() a second
time, but instead point to it from the ran_msg.cipher_mode_complete struct.
When the MSC-A decodes the Ciphering Mode Complete message, it always wants to
also decode the enclosed DTAP from the Layer 3 Message Contents IE. However,
when the MSC-I preliminarily decodes messages, it often just wants to identify
specific messages without fully acting on them, let alone dispatching RAN_UP_L2
events more than once. So leave it up to the supplied decode_cb passed to
ran_dec_l2() implementations to decide whether to decode the DTAP.
In msc_a.c hence evaluate the DTAP by passing a msgb to msc_a_up_l3(), which
will evaluate the RR Ciphering Mode Complete message found in the BSSMAP Cipher
Mode Complete's Layer 3 Message Contents IE.
Particularly, the previous choice of calling the decode_cb a second time for
the enclosed DTAP caused a header/length parsing error: the second decode_cb
call tried to mimick DTAP by overwriting the l3h pointer and truncating the
length of the msgb, but subsequently ran_a_decode_l2() would again derive the
l3h from the l2h, obliterating the intended re-interpretation as DTAP, and
hence the previous truncation caused error messages on each and every Cipher
Mode Complete message, like:
DBSSAP ERROR libmsc/ran_msg_a.c:764 msc_a(IMSI-26242340300XXXX:MSISDN-XXXX:TMSI-0xA73E055A:GERAN-A-77923:LU)[0x5563947521e0]{MSC_A_ST_AUTH_CIPH}: RAN decode: BSSMAP: BSSMAP data truncated, discarding message
This error was seen a lot at CCCamp2019.
Modifying the msgb was a bad idea to begin with, the approach taken in this
patch is much cleaner.
Note that apparently many phones include the IMEISV in the Cipher Mode Complete
message even though the BSSMAP Cipher Mode Command did not include the Cipher
Response Mode IE. So, even though we did not specifically ask for the Cipher
Mode Complete to include any identity, many MS default to including the IMEISV
of their own accord. Reproduce: attach to osmo-msc with ciphering enabled using
a Samsung Galaxy S4mini.
Related: OS#4168
Change-Id: Icd8dad18d6dda24d075dd8da72c3d6db1302090d
In ran_a_make_handover_request() we do prevent destination buffer
(r.encryption_information.key) overflow, but not source buffer
(n->geran.chosen_encryption->key) overrun if an incorrect key
length is received. Let's fix this.
Change-Id: I278bb72660634c2d535e1bd3d7fce5696da23575
Fixes: CID#198450 Out-of-bounds access
We basically need to make sure that one of two possible IEs
is not NULL, while another is NULL (eXclusive OR). This can
be done using at least two conditional branches.
Change-Id: Ie0f9b5c1bbbfb744e0615da07d76037d91b0abc8
Fixes: CID#198444 Logically dead code
For some reason, having ternary operator there makes Coverity think
that 'n->geran.chosen_encryption' is dereferenced before checking
against NULL. Let's make it happy, and move the assignment.
Change-Id: I95051d0f02e2fdd3ec8da3a506109e7b23e99b4b
Fixes: CID#198454 Dereference before null check
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
Neels Hofmeyr
Pau Espin
Vadim Yanitskiy
Harald Welte
Philipp Maier
Martin Hauke