Actually call msc_vlr_set_ciph_mode() and wrap away a_iface_tx_cipher_mode()
and ranap_iu_tx_sec_mode_cmd(). Hence we'll see decisions and errors in
msc_vlr_set_ciph_mode() as well.
Change-Id: Id23bc245d4b5707edcd27c44db272fbb211bf9bd
All functions in the individual msc_vlr_test_*.c files should be static; hence
we would be warned if one of them were unused (forgotten to add to the tests
array).
Change-Id: Ia169c6a1443a48879ab4777e09c2040c48810bf6
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ibcd1cc38f170895305ae176a5574384c74a33939
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
That's a preparation step for properly splitting main function of
different tests in follow-up function.
Change-Id: I68a2e94cf79fcb83286eef981a8d88bdbe10ef69
Related: OS#2864
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
Having while(0) as a body for for() cycle generate too much WTF while
looking at the code while not serving any obvious purpose. Let's just
drop it to avoid confusing developers.
Change-Id: I1f571ec319ff3231fd9acd4066e470476c3b1f78
Related: OS#2864
Don't fail tests using thwart_rx_non_initial_requests() via
OSMO_ASSERT. Instead log extended error which will fail the test
eventually but allows to gather additional info helpful for debugging.
Change-Id: I2607cb1ac60941dbc22fca532ed2b3738bfbcc63
Related: OS#2864
Print the IMSI used for each test. This enables expansion to tests with
several IMSIs in follow-up patches.
Change-Id: I7958608e5136351f7b7c0c57fe79791d989ce9c3
Related: OS#2864
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
We don't usually put space before in-place increment or decrement. Let's
make code look similar to other Osmocom projects.
Change-Id: I5962431ad16c97e412939dc1b8949f6361a5c26e
in the current implementation we still use osmo-bsc_mgcp, which
has many problems and is also obsoleted by osmo-mgw.
integrate osmo-mgw and re-implement the current switching using
an osmo fsm.
Depends: osmo-mgw Iab6a6038e7610c62f34e642cd49c93d11151252c
Depends: osmo-iuh I3c1a0455c5f25cae41ee19229d6daf299e023062
Closes: OS#2605
Change-Id: Ieea9630358b3963261fa1993cf1f3b563ff23538
According to TS 24.007 Section 11.2.3.2.3, it is possible that uplink L3
messages are duplicated in some scenarios, particularly during
assignment/handover procedure.
To avoid L3 entities from seeing duplicated messages, there's a modulo-2
or modulo-4 message sequence counter, based on which the MSC can detect
and suppress such duplicate messages.
It appears that even our unit tests were wrong in that regard so far.
Rather than manually adjusting each and every message, let's make sure
that the sequence number generation always increments as expected, and
that during matching of incoming messages, sequence numbers are masked
out.
Note: the tests will only pass from libosmocore Change-Id
Iec875a77f5458322dfbef174f5abfc0e8c09d464 onwards, due to
gsm48_hdr_msg_type() being broken in earlier versions.
Change-Id: Id15e399ab7e1b05dcd426b292886fa19d36082b1
Closes: #2908
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
NOTE: Like the previous code, OsmoMSC does *not yet check* whether
the configured cipher is compatible with the MS capabilities as
reported in CLASSMARK! The network hence might choose an algorithm
not supported by the phone. Fixing this is subject to another patch.
Closes: OS#2460
Change-Id: I79a4e2892eb5fbecc3d84e11dceffb7149db264b
The VLR code seems to have the assumption that there is one particular
algorithm to be used, as opposed to one of a set of algorithms.
What's missing is basically to decide when/where to pick the best
algorithm within the capabilities of the phone (classmark) and the
network configuration (net->a5_encryption_mask). So far, libvlr has no
notion of classmark. Rather, libmsc has.
Why does the VLR care about the particular algorithm at all? The VLR
should probably simply decide if it should use encryption or not, and if
so, the MSC will figure which algorithm to use.
Change-Id: I5ed80ca2086560a5975a758ec568a034a9a8ab89
osmo-msc still had large amounts of dead code that came along from
openbsc.git. This commit removes a lot of it, mostly stuff relevant
only to the BSC side of things (or even GPRS).
Change-Id: I247def85da2dc3ec461389fb74414a0d964e7e3c
Related: OS#2528
In I8de7c01f9ea1d66c384e57449c4140186f5ce6c5, libosmocore introduced
shorter names in gsm48_pdisc_names, which has implications on the
expected test output
Change-Id: I4421872a0d609dd50a6b911b928aa5e111d1ad24
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
To decide (in an upcoming patch) whether to use UMTS AKA derived Kc or the Kc
from the auth vector, the set_ciph_mode() from vlr_ops needs to know whether
UMTS AKA is being used. This could possibly derived from the msc_conn_ref, but
all flags are already available in the vlr_lu_fsm and vlr_access_req_fsm. Hence
add a umts_aka flag to the set_ciph_mode() callback invocation. The VLR FSMs
thus decide whether UMTS AKA or GSM AKA is to be used during Ciphering Mode
Command, which makes more sense than re-implementing the same decision process
in the MSC.
I considered placing the Kc derivation in vlr_set_ciph_mode() and only tell the
MSC's set_ciph_mode() implementation the precise keys it should use, but the
RAN particulars, and whether a Kc is used at all, rather belong with the MSC.
Related: OS#2745
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I983c48347faf4ee1b405d8174b4e006c904157cf
DLSMS logs SMS pointers, so is not suitable for logging them always. Allow
logging for manual invocation, though.
Change-Id: I1b7d2fd3fb38bf50eeabd6f7ef736d70a17de7a6
Adjust test expectations accordingly.
The error was:
==16084==ERROR: AddressSanitizer: heap-use-after-free on address 0x61500000f5f4 at pc 0x561be639ac2b bp 0x7ffc0aabbe40 sp 0x7ffc0aabbe38
READ of size 4 at 0x61500000f5f4 thread T0
#0 0x561be639ac2a in _msc_subscr_conn_put ../../../../src/osmo-msc/src/libmsc/osmo_msc.c:384
#1 0x561be636070b in rx_from_ms ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:204
#2 0x561be6360b21 in ms_sends_msg ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:217
#3 0x561be635b40a in test_call_mt ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_test_call.c:328
#4 0x561be6363bb7 in run_tests ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:802
#5 0x561be63524ea in main ../../../../src/osmo-msc/tests/msc_vlr/msc_vlr_tests.c:849
#6 0x7f6eebb3e2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
#7 0x561be6352fb9 in _start (/n/s/osmo/make-3G/osmo-msc/tests/msc_vlr/msc_vlr_test_call+0xdafb9)
Related: OS#2672
Change-Id: If0659a878deb383ed0300217e2c41c8c79b2b6a5
On MT call, there is a bug in CC conn use which leads to an early free and
use-after-free.
Add msc_vlr_test_call to show both MO and MT call legs separately and reproduce
the failure. It is visible in a sanitizer build (on debian 9).
A subsequent patch will fix the bug: If0659a878deb383ed0300217e2c41c8c79b2b6a5
Related: OS#2672
Change-Id: I6c3ca0c660388b1e2c82df17ec540c846201b0c7
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
If something changed the talloc landscape, it is hard to find out what the test
actually expected when it was written. Add the expectations in an inline
comment.
Change-Id: If92a18bb3dc24c2cf6498aa2da29266267488240
Terminating one of the FSM instances may effect termination and deallocation of
the others, as well as the vlr_subscr itself. So, reserve the vlr_subscr
locally, and then dispatch events to exactly those FSM instances that exist.
The changes in expected output in the msc_vlr_tests shows that the subscriber
was deallocated from the first FSM termination, and now sticks around until
we've checked both FSMs are gone.
Change-Id: I56551ecc10f5295fe75944bdde4b583b1b621811
If dispatching a conn timeout, the conn fsm will already have been discarded,
and we cannot fire any more events to it.
The expected test output changes illustrate that we are now omitting event
dispatches that happen *after* the same FSM was already deallocated.
Change-Id: I25af3e5a1b04e3a5c9f41956cbcbbdd8439c6457
The name auth_tuple_max_use_count suggests that if I want to use each auth
tuple exactly once, I need to set it to 1. Curiously, so far you need to set
to intended uses - 1.
Reflect this in its name by renaming to auth_tuple_max_reuse_count.
I first considered to not rename but change the if-conditions so that == 1
means each tuple is used once, and upon struct vlr allocation, set the default
to 1. That would also logically entail that setting to 0 means to re-use
vectors infinitely often, like now a value < 0 does. That means, when
allocating a vlr struct zeroed out, we would by default have the most
dangerous/unsafe configuration. It's no problem to set a default to 1 upon
allocation, but by renaming the variable instead, we get safer alloc-zero
behavior and don't need to change any conditionals in the code (even though the
patch ends up considerably larger from all the renaming).
Change-Id: I0b036cae1536d5d6fb2304f837ed1a6c3713be55
Before this, a code change in libvlr or libmsc would not cause a rebuild of the
tests.
You'd have thought 'AM_LDADD' were the right name for the variable, but
apparently it is just 'LDADD' instead. Tested that it works as intended.
Change-Id: Icbdedc1581fa23abe9ed99cef3918592b25f30b3
osmo-msc doesn't use any API/symbols of libasn1c directlry. Rather,
we use libosmo-ranap which in turn uses libasn1c. Let the linker
work out that dependency.
This fixes the following dpkg-shlibdeps warning:
Change-Id: I2f840884d8f1cc542de1e26acd3d4215bd2fd899
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/osmo-msc/usr/bin/osmo-msc was not linked against libasn1c.so.0 (it uses none of the library's symbols)
Add required msgb_free() to vlr_gsupc_read_cb().
Adjust msc_vlr_tests.c gsup_rx() to *not* free the msgb again after
vlr_gsupc_read_cb() did.
Related: OS#2476
Change-Id: I347c53f57a7fa79921aed3f6e42599841acf27c0
The MSC should not fiddle with low-level SI details like rest octets
anyway. Unfortunately simply removing the header is impossible as it
causes massive fallout due to missing includes. Fixed it as well.
The only other parameter which required removal is cell_ro_sel_par which
is not referenced anywhere in the code anyway.
Change-Id: Ibff77330de056fad4288cd4c48d016aad8105354
After osmo-mgw changes I8e0b2d2a399b77086a36606f5e427271c6242df1 and
I99f7faab637cfcc22ece64a1dbcbe590f2042187, apply linking of new
libosmo-mgcp-client and renames to drop the "gw" from mgcp_client_*.
Also rename the gsm_network.mgcpgw to mgw, to indicate that the MGCP client is
used to contact the MGW (Media Gateway).
Depends: I8e0b2d2a399b77086a36606f5e427271c6242df1 (osmo-mgw)
I99f7faab637cfcc22ece64a1dbcbe590f2042187 (osmo-mgw)
Change-Id: I093ad02ca0e532f659447c785e09678b3e6f220d
It was a n00b mistake to define COMMON_LDFLAGS and COMMON_LDADD to pass the
same linker options to each test binary. Instead, use AM_LDFLAGS and remove the
autoreconf warning.
tests/msc_vlr/Makefile.am:66: warning: variable 'COMMON_LDFLAGS' is defined but no program or
tests/msc_vlr/Makefile.am:66: library has 'COMMON' as canonical name (possible typo)
Related: OS#2448
Change-Id: I6efae6e192b22de2c1d706edd55385135142532b
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Neels Hofmeyr
Harald Welte
Philipp Maier
Neels Hofmeyr