Give the HLR a chance to send us updated subscriber data by indicating the CN
domain to be Circuit Switched, only during a LU Request GSUP message.
Adjust msc_vlr_tests to expect the added GSUP CN domain IE to indicate CS, i.e.
append '280102'.
Related: OS#3601
Change-Id: I0c2d33fbfdb4728e480679120d06b7f3a2ccfd76
When the VLR requests a Ciphering Mode with vlr_ops.set_ciph_mode(), and if we
need a ciph algo flag from a Classmark information that is not yet known
(usually CM 2 during LU), send a BSSMAP Classmark Request to get it.
To manage the intermission of the Classmark Request, add
- msc_classmark_request_then_cipher_mode_cmd(),
- state SUBSCR_CONN_S_WAIT_CLASSMARK_UPDATE,
- event SUBSCR_CONN_E_CLASSMARK_UPDATE.
From state AUTH_CIPH, switch to state WAIT_CLASSMARK_UPDATE. Once the BSSMAP
Classmark Response, is received, switch back to SUBSCR_CONN_S_AUTH_CIPH and
re-initiate Ciphering Mode.
To be able to re-enter the Ciphering Mode algo decision, factor it out into
msc_geran_set_cipher_mode().
Rationale:
In the following commit, essentially we stopped supporting A5/3 ciphering:
commit 71330720b6
"MSC: Intersect configured A5 algorithms with MS-supported ones"
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
A5/3 was no longer supported because from that commit on, we strictly checked
the MS-supported ciphers, but we did not have Classmark 2 available during
Location Updating.
This patch changes that: when Classmark 2 is missing, actively request it by a
BSSMAP Classmark Request; continue Ciphering only after the Response. Always
request missing Classmark, even if a lesser cipher were configured available.
If the Classmark Update response fails to come in, cause an attach failure.
Instead, we could attempt to use a lesser cipher that is also enabled. That is
left as a future feature, should that become relevant. I think it's unlikely.
Technically, we could now end up requesting a Classmark Updating both during LU
(vlr_lu_fsm) and CM Service/Paging Response (proc_arq_fsm), but in practice the
only time we lack a Classmark is: during Location Updating with A5/3 enabled.
A5/1 support is indicated in CM1 which is always available, and A5/3 support is
indicated in CM2, which is always available during CM Service Request as well
as Paging Response. So this patch has practical relevance only for Location
Updating. For networks that permit only A5/3, this patch fixes Location
Updating. For networks that support A5/3 and A5/1, so far we always used A5/1
during LU, and after this patch we request CM2 and likely use A5/3 instead.
In msc_vlr_test_gsm_ciph, verify that requesting Classmark 2 for A5/3 works
during LU. Also verify that the lack of a Classmark Response results in attach
failure.
In msc_vlr_test_gsm_ciph, a hacky unit test fakes a situation where a CM2 is
missing during proc_arq_fsm and proves that that code path works, even though
the practical relevance is currently zero. It would only become interesting if
ciphering algorithms A5/4 and higher became relevant, because support of those
would be indicated in Classmark 3, which would always require a Classmark
Request.
Related: OS#3043
Depends: I4a2e1d3923e33912579c4180aa1ff8e8f5abb7e7 (libosmocore)
Change-Id: I73c7cb6a86624695bd9c0f59abb72e2fdc655131
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
All functions in the individual msc_vlr_test_*.c files should be static; hence
we would be warned if one of them were unused (forgotten to add to the tests
array).
Change-Id: Ia169c6a1443a48879ab4777e09c2040c48810bf6
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Neels Hofmeyr
Philipp Maier
Neels Hofmeyr