See also change-id I72a1dbb30e0a39dbf4b81c7e378d5607b62e10d3 in
osmo-ttcn3-hacks.git, which adds a similar test to the MSC_Tests.ttcn suite.
Writing this test helped me fix the issue faster, why not keep it now that it's
there.
Related: OS#2947
Change-Id: Iba56556207cf6e79e6531b0e7dd3eaec28fb5eaa
Switch by vsub->sec_ctx to use the proper Kc for ciphering.
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. The VLR already stores
whether the MS replied with a GSM AKA SRES or a UMTS AKA RES in vsub->sec_ctx.
So far, though, we were always using the UMTS AKA Kc just because the USIM and
core net are capable of it, ignoring the choice the MS might have made in the
Authentication Response.
In msc_vlr_test_gsm_ciph, fix the test expectations to the correct GSM AKA Kc
keys, showing that all of LU, CM Service Request and Paging Response now
support MS choosing GSM AKA in a UMTS capable environment.
Related: OS#2793
Change-Id: I42ce51ae979f42d173a45ae69273071c426bf97c
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. In that case, we must
make sure to send the GSM AKA Kc for ciphering.
Add test_gsm_ciph_in_umts_env() to msc_vlr_test_gsm_ciph.c to answer an Auth
Request with a GSM AKA response (see the log stating "AUTH established GSM
security context" after we sent a UMTS AKA challenge).
In the test, show that we currently send the *wrong* Kc, i.e. the UMTS AKA
derived Kc for GERAN, instead of the correct Kc for GSM AKA (which was received
from the HLR in the auth tuples).
Subsequent patch I42ce51ae979f42d173a45ae69273071c426bf97c will fix this and
correct the test expectations.
Related: OS#2793
Change-Id: I85f12a20dcd701e671188e56811ec7b58d84da82
Clearly distinguish between Ciphering Mode Command on GERAN and Security Mode
Control on UTRAN.
Cosmetic: explicitly verify the key strings in the testing code (not only in
the expected output).
Change-Id: Ica93ed06c4c63dc6768736d25231de8068001114
All functions in the individual msc_vlr_test_*.c files should be static; hence
we would be warned if one of them were unused (forgotten to add to the tests
array).
Change-Id: Ia169c6a1443a48879ab4777e09c2040c48810bf6
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
NOTE: Like the previous code, OsmoMSC does *not yet check* whether
the configured cipher is compatible with the MS capabilities as
reported in CLASSMARK! The network hence might choose an algorithm
not supported by the phone. Fixing this is subject to another patch.
Closes: OS#2460
Change-Id: I79a4e2892eb5fbecc3d84e11dceffb7149db264b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Neels Hofmeyr
Harald Welte
Neels Hofmeyr
Philipp Maier