When modern Smartphones receive "Not in VLR". The baseband firmware
apparently does not try to do an IMSI ATTACH but just remains un-happy
and will not connect to the network anymore.
Let's revert it and see if we can find the real issue about the
sms being invalid. Sylvain has pointed out that we get invoked
from a timer and might not have stopped it properly.
This reverts commit 80ba9b5dd6.
I am not sure why it is crashing so this is a speculative fix based on
something we already did in 3e9b2ec257.
#0 sms_find_pending (smsq=0x2706300, sms=<optimized out>) at sms_queue.c:77
#1 sms_sms_cb (subsys=<optimized out>, signal=4, handler_data=0x26e2270,
signal_data=0x7fffdac256c0) at sms_queue.c:396
#2 0x00007fcdea94394c in osmo_signal_dispatch (subsys=1, signal=4,
signal_data=0x7fffdac256c0) at signal.c:105
#3 0x000000000042acc0 in send_signal (sig_no=<optimized out>, trans=<optimized out>,
sms=<optimized out>, paging_result=<optimized out>) at gsm_04_11.c:124
#4 0x000000000042c8e2 in gsm411_sapi_n_reject (conn=0x2722d30) at gsm_04_11.c:999
#5 0x00000000004085d3 in send_sapi_reject (link_id=<optimized out>, conn=<optimized out>)
at bsc_api.c:733
#6 rll_ind_cb (_data=<optimized out>, lchan=<optimized out>, link_id=<optimized out>,
rllr_ind=<optimized out>) at bsc_api.c:755
#7 rll_ind_cb (lchan=<optimized out>, link_id=<optimized out>, _data=<optimized out>,
rllr_ind=<optimized out>) at bsc_api.c:736
#8 0x000000000041f522 in complete_rllr (rllr=<optimized out>, type=<optimized out>)
at bsc_rll.c:55
#9 0x00007fcdea9433bc in osmo_timers_update () at timer.c:243
#10 0x00007fcdea94369b in osmo_select_main (polling=0) at select.c:133
#11 0x0000000000406fbc in main (argc=9, argv=<optimized out>) at bsc_hack.c:346
The legacy functions have a bad/wrong return value for the number
of septets in the string. Change the code to use the new functions
which will fix encoding issues as well.
Location Update Requests time out and get rejected because the
subscriber is not authorized. Authorizing the subscriber through
openBSC or sqlite3 doesn't help the subscriber is still seen and
shown as not authorized
The value is read as uint, this is the wrong type it's a (u)longlong
in libdbi 0.9.0 and later.
Currently, all timestamps are force to SeqNo*d + C which is more than
required by the nanoBTS which seems to be sensitive to alignment
errors only (dTS != k*d, d = ptime * rate = 160).
This patch replaces the force_constant_timing feature by a
force_aligned_timing feature. The timestamp offset will only be
changed (and timestamp errors counted) when the alignment does not
match to the raster based on ptime (default 20ms).
The VTY interface does not change.
Sponsored-by: On-Waves ehf
Currently the counter and output timestamp values are written out for
each packet. This makes it difficult to see in the diffs what has
been changed significantly.
This patch changes this by showing differences for those
values. The absolute input values are also shown now. In addition,
the sequence numbers (the difference for the output value) are
written, too.
Sponsored-by: On-Waves ehf
This adds two test cases:
1. Packet repetition (dSeq=0, dTS=0)
2. Broken seqNo (dSeq=0, dTS=160)
The second had been already present in the test cases, but it was a
mere copy&paste mistake which turned out to be rather helpful. This
patch therefore turns it into a documented test case.
Sponsored-by: On-Waves ehf
Decoding and encoding of FR and EFR TRAU frames are put into seperate
functions. CRC check is done to detect bad EFR TRAU frames.
The test case includes FR and EFR transcoding.
EFR support was tested with Nokia InSite BTS and Siemens BS11.
There is the wrong record field selection being used to extract the
default value. It returns the tuple offset instead of the value.
This patch fixes this.
Sponsored-by: On-Waves ehf
Currently the SDP 'ptime' media attribute is never set in generated
MGCP responses.
This patch optionally includes the 'ptime' attribute if
packet_duration_ms is != 0. This behaviour can be enabled/disabled
by using the VTY command "sdp audio-payload send-ptime" (enabled by
default).
Sponsored-by: On-Waves ehf
This patch parses the 'ptime' and 'maxptime' SDP attributes, and the
SDP rate information and sets up packet_duration_ms accordingly. If
the packet duration is unknown or allows for different values (e.g.
because 'ptime' uses a range or 'maxptime' allows for more than one
frame) the duration is set to 0.
Sponsored-by: On-Waves ehf
Currently the local connection options have been stored as a string.
This patch replaces this string by a struct (that still contains a
string) along with the parsed fields (only the packetization period
at the moment).
It also re-adds the calls to set_local_cx_options() to the
handle_create_con() and handle_modify_con() functions. Except for
the test program this has no side effects, since the LCO values
aren't used yet.
This also adds additional MDCX tests (based on MDCX4) to test the
analysis of different combinations of 'p' and 'ptime' fields.
Sponsored-by: On-Waves ehf
Currently the timestamp offset calculation is done in two different
places.
This patch moves and unifies both code parts into a separate function.
Sponsored-by: On-Waves ehf
This tool provides the following features:
- Output formats: state, C arrays
- Optionally take RTP payload from existing state files
- Generate streams with RTP timestamp jumps and/or delays
- Set/change SSRC or payload type
Requires erlang to be installed.
Example:
Generate 300 packets, set playout time offset to 1s, set
RTP timestamp offset to 8000 (1s), generate another 100
packets, the RTP payload is copied from rtp.state:
./gen_rtp_header.erl --type=98 --file=rtp.state --
0 300 0 --delay=1.0 100 8000
Sponsored-by: On-Waves ehf
This patch adds optional parameters to pass the state file, the
destination address (default 127.0.0.1), the destination port
(default 4000), the source port (default 0). So it is called as
follows:
gst rtp_replay.st -a [FILE [HOST [SOURCEPORT [DESTPORT]]]]
In addition, nonexistant FILEs are no longer created but opened
read-only instead.
Sponsored-by: On-Waves ehf
Andreas highlighted that the doubel assignment is not needed and
wrong. Change the code to assign chan_list[0] before writing the
base frequency to the header. Update the testcase to make the highest
bit set and update the test result.
The IMSI can only be 15 characters in length, our define gives
us a length of 17. This means we have place for two NULs. Use
strncpy and make sure it is null-terminated.
Fixes: Coverity CID 1040707
Since the packet duration is given in ms with the 'ptime' RTP media
attribute and also with the 'p' MGCP local connection option, the
computation is changed to use this value (if present). The
computation assumes, that there are N complete frames in a packet and
takes into account, that the ptime value possibly had been rounded
towards the next ms value (which is never the case with a frame length
of exact 20ms).
Sponsored-by: On-Waves ehf
This forces the output timing to fulfill
dTS = dSegNo * fixedPacketDuration
where dSegNo = seqNo - lastSeqNo.
If timestamp patching is enabled, the output timestamp will be set
to lastTimestamp + dTS. This kind of relative updating is used to
handle seqNo- and timestamp-wraparounds properly.
The updating of timestamp and SSRC has been separated and the patch
field of mgcp_rtp_state has been renamed to patch_ssrc to reflect
it's semantics more closely. The offset fields are now used always
and will change the corresponding header field if they are != 0.
Ticket: OW#1065
Sponsored-by: On-Waves ehf
Currently the output SSRC is always forced to be the same if SSRC
patching is enabled.
This patch modifies this to optionally restrict the number of SSRC
changes that will be corrected.
Note that the configuration only allows for the 'once' mode and 'off'.
Sponsored-by: On-Waves ehf
The ssrc has been used without respect to proper byte ordering in
mgcp_patch_and_count(). This only affected log messages.
This patch introduces a new variable 'ssrc' that takes the value of
the SSRC in proper byte order.
Sponsored-by: On-Waves ehf
This patch adds a packet_duration field to mgcp_rtp_state which
contains the RTP packet's duration in RTP timestamp units or 0, when
the duration is unknown or not fixed.
Sponsored-by: On-Waves ehf
Currently seq_offset and timestamp_offset are updated on each SSRC
change even when SSRC patching is not allowed.
This patch fixes this by changing mgcp_patch_and_count() to only
update these fields when SSRC patching is allowed.
Sponsored-by: On-Waves ehf
Show old and new SSRC. Move logging command upward to show the values
immediately after the change has been detected and before any fixing
attempt is made.
Sponsored-by: On-Waves ehf
This adds datastructures and a VTY frontend to configure the
different type of RTP header patching: SSRC and timestamp.
Note that timestamp patching is not yet implemented.
Sponsored-by: On-Waves ehf
The tsdelta computation and error detection didn't handle the
intialisation phase properly.
This patches fixes this by skipping the output timing validation
when the SSRCs don't match.
Sponsored-by: On-Waves ehf
This patch extends the existing RTP error check test by adding a
check for timestamp errors after SSRC changes and a check for a
segno delta of 2 (with a timestamp delta of 320).
To test SSRC patching too, a corresponding line will be written on
each SSRC change that has been detected in the output stream.
In addition there is now support for selectively enabling/disabling
SSRC and timestamp patching. The RTP test sequence is repeated for
all combinations thereof.
Sponsored-by: On-Waves ehf
So far the SDP part of the CRCX message has been ignored by the MGW.
This patch adds SDP parsing for this case, eventually updating the
net end's payload type and connection parameters.
Sponsored-by: On-Waves ehf
So far the payload type used in RTP streams has been taken from the
trunk configuration in NAT mode.
This patch changes the implementation to use the payload type
announced in the SDP part of MGCP messages and responses. SDP
descriptions more than one m=audio line are not yet supported
properly (always the last one is taken).
Ticket: OW#466
Sponsored-by: On-Waves ehf
The MGCP message isn't always NUL-terminated when arriving at
mgcp_handle_message(). This may lead to undefined results.
This patch ensures that the message text is NUL-terminated by
setting *msg->tail to '\0' in mgcp_handle_message().
Addresses:
<000b> mgcp_protocol.c:642 Unhandled option: 'r'/114 on 0x3
<000b> mgcp_protocol.c:593 Unhandled SDP option: '='/61 on 0x3
<000b> mgcp_protocol.c:871 Unhandled option: '.'/46 on 0x2
Sponsored-by: On-Waves ehf
Holger Hans Peter Freyther
Andreas Eversberg