These commands manage the TLLI list used to decide whether an APN
shall be patched or not. Note that this list is (currently) only
maintained if IMSI matching is used.
VTY commands (enable node):
show gbproxy tllis show all TLLI entries
delete-gbproxy-tlli NSEI stale purge all stale entries
delete-gbproxy-tlli NSEI imsi IMSI purge entry with the IMSI given
delete-gbproxy-tlli NSEI tlli TLLI purge entry with the TLLI given
Sponsored-by: On-Waves ehf
This patch adds IMSI/TLLI connection tracking and uses it to control
APN patching based on the IMSI. TLLI entries can expire based on age
and/or by limiting the TLLI list size.
VTY config-gbproxy:
no core-access-point-name disable APN patching
core-access-point-name none remove APN if present
core-access-point-name APN replace APN if present
core-access-point-name none match-imsi RE remove if IMSI matches
core-access-point-name APN match-imsi RE replace if IMSI matches
tlli-list max-age SECONDS expire after SECONDS
no tlli-list max-age don't expire by age
tlli-list max-length N keep N entries only
no tlli-list max-length don't limit list length
RE is an extended regular expression, e.g. ^12345|^23456
Ticket: OW#1192
Sponsored-by: On-Waves ehf
Patch the APN in every 'Activate PDP Context Request' message to the
value given by the 'core-access-point-name' command. If the command is
given without an APN, the whole APN IE will be removed. If the
command is being prefixed by a 'no', the APN IE remains unmodified.
The patch mode 'llc-gsm' is added to selectively enable the patching
of LLC session management messages. This is enabled implicitely by
the patch mode 'llc'.
Note that the patch mode should not be set to a value not enabling
the patching of LLC GSM messages ('llc-gsm', 'llc', and 'default' are
sufficient to patch 'Activate PDP Context Request' messages).
Ticket: OW#1192
Sponsored-by: On-Waves ehf
This patch extends the BSSGP patch code to also patch LLC information
elements along with MCC/MNC patching support for the following messages:
- Attach Request
- Attach Accept
- Routing Area Update Request
- Routing Area Update Accept
- P-TMSI reallocation command
Note that encrypted packets will not be patched.
Ticket: OW#1185
Sponsored-by: On-Waves ehf
This adds a feature to patch the BSSGP MNC/MCC fields of messages going
to and coming from the SGSN. To enable this feature, the gbproxy's
VTY commands 'core-mobile-country-code' and/or
'core-mobile-network-code' must be used. All packets to the SGSN are
patched to match the configured values. Packets received from the
SGSN are patched to the corresponding values as last seen from the BSS
side.
Note that this will probably not work with a gbproxy used for several
BSS simultaneously.
Note also, that MCC/MNC contained in a LLC IE will not be patched.
Ticket: OW#1185
Sponsored-by: On-Waves ehf
Jacob pointed out that "free_endp" refers to the memory of
the endpoint being freed. What we want is actually a way to
release an endpoint (and the resource it allocated) or in
the case of the testcase/testapp initialize the data structure
correctly. Introduce two names for that.
Transcoding from GSM to PCMA can lead to the MGCP MGW sending
two PCMA packages with the same sequence number and timestamp.
Once with the encoded audio and once completely empty.
This is because "state->dst_packet_duration" is 0 in most cases
(unless a ptime is forced) and we attempt to encode audio even
if there are not enough samples. The encode_audio return will
return 0 in that case which is not trated as an error by the
mgcp network code.
Handle rc == 0 specially and document the semantic.
This parameter is not used (the methods are always called with an
argument of 1 in the third position). Thus the parameter is removed
completely.
Sponsored-by: On-Waves ehf
Currently, if there is no SDP data in the MGCP message received from
the net, the fields containing audio encoding information are not set
in net_end. So in recvonly mode transcoding would not be set up
correctly.
This patch changes the implementation of the code handling CRCX and
MDCX to use the codec signalled in the MGCP local connection options
(field 'a:') if there isn't any SDP data. This is only halfway
negotiation, because the codec is used blindly and not matched
against the supported ones.
Sponsored-by: On-Waves ehf
This patch moves the files relevant to transcoding from
src/osmo-bsc_mgcp to src/libmgcp and src/include/openbsc. Makefiles
and include directives are being updated accordingly.
Sponsored-by: On-Waves ehf
The current transcoder implemenation always does a 1:1 recoding
concerning the duration of a packet. So RTP timestamps and sequence
numbers are not modified.
This is not sufficient in some cases, e.g. when the BTS does only
allow for a single fixed ptime.
This patch decouples encoding from decoding and moves the decoded
samples to the state structure so that samples can be combined or
drain according to the packaging of incoming and outgoing packets.
This patch incorporates parts of Holger's experimental fixes in
0e669e05^..9eba68f9.
Ticket: OW#1111
Sponsored-by: On-Waves ehf
This patch adds the get_net_downlink_format_cb() callback to provide
payload_type, subtype_name, and fmtp_extra suitable for use in a MGCP
response sent to the network. Per default, the BTS side values are
returned since these must be honoured by the net peer when sending
audio to the media gateway (unless transcoding is done).
Sponsored-by: On-Waves ehf
This patch adds the fields channels, subtype_name, and audio_name to
the struct. The field audio_name contains the full string that has
been used for the last part of a SDP a=rtpmap line. The others contain
decoded parts of that string. If no a=rtpmap line has been given
(e.g. because dynamic payload types are not used), values are
assigned when the payload type matches one of the predefined ones
(GSM, G729, PCMA).
The patch also moves the audio_name parsing code to a dedicated
set_audio_info() function.
Sponsored-by: On-Waves ehf
This patch adds the callbacks rtp_processing_cb and
setup_rtp_processing_cb to mgcp_config to support arbitrary RTP
payload processing.
Sponsored-by: On-Waves ehf
Currently LLC parsing is part of gprs_llc.c which needs large parts
of the SGSN code parsing to fulfill its link dependencies.
This patch moves the functions that just do plain parsing, dumping,
and FCS computation to a different file to avoid these dependencies
if LLC stateful processing is not needed. It also exposes
struct gprs_llc_hdr_parsed and enum gprs_llc_cmd publically.
Sponsored-by: On-Waves ehf
This patch adds the voice muxer. You can use this to batch RTP
traffic to reduce bandwidth comsuption. Basically, osmux transforms
RTP flows to a compact batch format, that is later on decompacted
to its original form. Port UDP/1984 is used for the muxer traffic
between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This
feature depends on libosmo-netif, which contains the osmux core
support.
Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using
the vendor-specific extension X-Osmux: on) coming from the BSC-NAT,
so you can selectively enable osmux per BSC from one the bsc-nat.cfg
file, so we have a centralized point to enable/disable osmux.
First thing you need to do is to accept requests to use Osmux,
this can be done from VTY interface of osmo-bsc_nat and
osmo-bsc_mgcp by adding the following line:
mgcp
...
osmux on
osmux batch-factor 4
This just initializes the osmux engine. You still have to specify
what BSC uses osmux from osmo-bsc_nat configuration file:
...
bsc 1
osmux on
bsc 2
...
bsc 3
osmux on
In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does
not have osmux enabled.
Thus, you can selectively enable osmux depending on the BSC, and
we have a centralized point for configuration from the bsc-nat to
enable osmux on demand, as suggested by Holger.
At this moment, this patch contains heavy debug logging for each
RTP packet that can be removed later to save cycles.
The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that
is received to configure an endpoint.
This has been pointed out by Jacob and removes two more duplicates
of the struct. For the unused CTRL_CMD_DEFINE_STRING macro there
will be no verify command.
FreeBSD uses POSIX netinet/in.h for representing socket addresses
data types.
[Holger removed the #ifdef and changed the order of includes to
have specific ones first and system includes later]
The code in the BSC/NAT called ipaccess_rcvmsg_base without
checking if the protocol is IPA. This lead the BSC to respond
to SCCP messages with an "ID ACK". From a quick look neither
the code of ipaccess_rcvmsg_base in OpenBSC nor the copy of
libosmo-abis ever checked the protocol header. So this code
has been wrong since initially being created in 2010.
This is an incompatible database schema change. Store the type of
the address in the database for both the sender and the receiver.
Currently it is possible to use SMPP to store a SMS and the NPI
and TON will be lost on the delivery of the SMS. The schema is
changed to make the delivery always use the right NPI/TON. This
patch is not ready for the master branch as there is no upgrade
path for the HLR yet.
sgsn_main.c: In function ‘main’:
sgsn_main.c:345:2: warning: implicit declaration of function ‘gprs_sndcp_vty_init’ [-Wimplicit-function-declaration]
gprs_sndcp_vty_init();
^
sgsn_main.c:354:2: warning: implicit declaration of function ‘sgsn_gtp_init’ [-Wimplicit-function-declaration]
rc = sgsn_gtp_init(&sgsn_inst);
^
CC gprs_gmm.o
gprs_gmm.c: In function ‘gsm48_tx_gmm_att_ack’:
gprs_gmm.c:350:11: warning: unused variable ‘ptsig’ [-Wunused-variable]
uint8_t *ptsig, *mid;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_auth_ciph_resp’:
gprs_gmm.c:524:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_att_req’:
gprs_gmm.c:703:9: warning: implicit declaration of function ‘sgsn_acl_lookup’ [-Wimplicit-function-declaration]
!sgsn_acl_lookup(mi_string))) {
^
gprs_gmm.c:632:40: warning: variable ‘old_ra_info’ set but not used [-Wunused-but-set-variable]
uint8_t *cur = gh->data, *msnc, *mi, *old_ra_info, *ms_ra_acc_cap;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_ra_upd_req’:
gprs_gmm.c:915:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c:910:11: warning: variable ‘ms_ra_acc_cap’ set but not used [-Wunused-but-set-variable]
uint8_t *ms_ra_acc_cap;
^
gprs_gmm.c: At top level:
gprs_gmm.c:458:12: warning: ‘gsm48_tx_gmm_auth_ciph_req’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_req(struct sgsn_mm_ctx *mm, uint8_t *rand,
^
gprs_gmm.c:501:12: warning: ‘gsm48_tx_gmm_auth_ciph_rej’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_rej(struct sgsn_mm_ctx *mm)
^
gprs_gmm.c:1169:13: warning: ‘msgb_put_pdp_addr_ipv4’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ipv4(struct msgb *msg, uint32_t ipaddr)
^
gprs_gmm.c:1180:13: warning: ‘msgb_put_pdp_addr_ppp’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ppp(struct msgb *msg)
The old ipa_msg_recv() implementation didn't support partial receive,
so IPA connections got disconnected when this happened.
This patch adds the handling of the temporary message buffers and uses
ipa_msg_recv_buffered().
It has been successfully tested by jerlbeck with osmo-nitb and
osmo-bsc.
Ticket: OW#768
Sponsored-by: On-Waves ehf
In case the max_power_reduction changes, issue a new Set Radio
Carrier Attributes command. OML 12.21 allows to not include the
ARFCN list and the semantic I picked/understand is that a partial
update is possible.
Fixes: SYS#267
Add the control interface with no hierachy right now and implement
the first command to list IMSI + Context Address of active sessions.
sgsn_cmd_handle could share more code with bsc variant.
Fixes: SYS#264, SYS#265
For GPRS the look-up via bts/trx does not make any sense and would
introduce bad depdencies for the SGSN. Move the look-up code to a
new file and introduce new setup methods.
Sadly there is no proper foreign key relationship on the tables
that related to the Subscriber. This means we can't use a DELETE
with Cascade and need to delete everything by hand. To make things
worse maybe the SMS/Paging code is still using the subscriber
making the operation more dangerous. I had added NULL checks for
sender_id/receiver_id at 30C3 so we should not crash in this
situation.
Fixes: SYS#274
The test has been manually verified. Executing the select for
the subscribers showed:
sqlite> select * from Subscriber;
1|2014-03-23 12:12:46|2014-03-23 12:19:09|2620345||445567|1||0|
This created a subscriber with the right IMSI, MSISDN and has
it authorized.
Fixes: SYS#275
The new definitions are: half rate and AMR
Change of definition name for bad frame, because it applies to all types of
traffic, not only TCH/F.
Increase MNCC interface version to 4. Version 3 is skipped, because it was
used by older version of Linux-Call-Router which is incompatible with the
current version of the MNCC interface.
Each RP-DATA should have a unique msg reference. Currently 42 is
used for all of these. Remember the last reference we used and
increment it on the next SMS. Do not track if the reference is
still in use a clash is a lot less likely now. First unless SMPP
is used only one SMS is delivered at a time, second the transaction
space is a lot smaller than the one for the reference.
In file included from bsc_api.c:34:0:
../../include/openbsc/trau_mux.h:62:15: warning: ‘struct decoded_trau_frame’ declared inside parameter list [enabled by default]
const struct decoded_trau_frame *tf);
^
../../include/openbsc/trau_mux.h:62:15: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
../../include/openbsc/trau_mux.h:64:15: warning: ‘struct decoded_trau_frame’ declared inside parameter list [enabled by default]
const struct decoded_trau_frame *tf);
^
../../include/openbsc/trau_mux.h:66:2: warning: ‘struct decoded_trau_frame’ declared inside parameter list [enabled by default]
const unsigned char *data);
^
../../include/openbsc/trau_mux.h:68:2: warning: ‘struct decoded_trau_frame’ declared inside parameter list [enabled by default]
const unsigned char *data);
For the max power reduction we will need to have a different range
method. It will need to check if the value is even. Make the set,
get and verify methods available through a macro.
Currently, when the SSRC changes within a stream and SSRC fixing is
enabled, the RTP timestamp between the last packet that has been
received with the old SSRC and the first packet of the new SSRC
is always incremented by one packet duration.
This can lead to audio muting (at least with the nanoBTS) when the
wallclock interval between these packets is too large (> 1s).
This patch changes the implementation to base the RTP timestamp offset
on the wallclock interval that has passed between these two packets.
Ticket: OW#466
Sponsored-by: On-Waves ehf
E1 based BTS use TRAU muxer to decode TRAU frames. After changing
channel from one timeslot to another (due to handover or assignment),
the TRAU muxer must be updated. The call reference of the call is
disconnected from the old channel and connected to the new channel.
The filtering architecture already allowed to specify a reject
reason but this has not been used for the access-lists. Extend
the access-list to include a reject reason and extend the test
case to honor it.
Holger Hans Peter Freyther
Andreas Eversberg