cellular-infrastructure
/
osmo-msc
mirror of https://gerrit.osmocom.org/osmo-msc
9
0
Fork 0
Code Issues Releases Wiki Activity
480 Commits 89 Branches 106 Tags 41 MiB
Commit Graph

32 Commits

Author SHA1 Message Date
Harald Welte 04d3c9224f An application that has own events and file descriptors, must poll 
select function ob libbsc. A "polling" flag is used to enable polling.
In this case select() will not sleep until file descriptor events occurr
or nearest timer expires. Also a return value will indicate if there was
an event that has been handled. If there was an event, the application
decides to poll again and don't wait.

In case for bsc_hack, the polling flag is not set. select will sleep as
usual.

(Andreas Eversberg)
 2009-05-23 06:07:04 +00:00
Harald Welte ff117a8d11 * rename the timer functions to avoid name collisions with libmisdn. 
* the return value of bsc_update_timers() is required for applications to find out if a timer was fired
(Andreas Eversberg)
 2009-05-23 05:22:08 +00:00
Harald Welte ef061951e6 dump CCLK accuracy/type as part of bs11_config query 2009-05-17 12:43:42 +00:00
Harald Welte a7cfa03cb2 bs11_config: print PLL 'work' and 'set' values during query 2009-04-29 22:33:02 +00:00
Harald Welte 70128d03df remove extra whitespace in output of 'query' command 2009-04-29 13:27:56 +00:00
Harald Welte aaf02d9e01 read the PLL config as part of the bs11_config 'query' command 2009-04-29 13:25:57 +00:00
Harald Welte e69f5fb411 Add bs11_config commands to set the PLL mode from E1_LOCKED to STANDALONE 
and vice-versa.  This has not yet been tested yet.
 2009-04-28 16:31:38 +00:00
Harald Welte 273feca77f Fix 'delete-trx1' command of bs11_config (we can now delete TRX1) 2009-03-28 16:53:25 +00:00
Harald Welte a30b1cad9f more verbose attribute ack/nack 2009-03-10 11:46:02 +00:00
Harald Welte 074d873df9 correct E1 timeslot / TEI attribute parsing 2009-02-21 20:41:12 +00:00
Harald Welte 0558f547c7 only perform oml-tei once 2009-02-21 20:17:12 +00:00
Harald Welte b6c92ae782 * set OML TEI and E1 timeslot in one command 
* introduce new 'oml-tei' command of bs11_config
 2009-02-21 20:15:32 +00:00
Harald Welte 099d6100e6 fix various compiler warnings while building bs11_config 2009-02-21 12:59:58 +00:00
Harald Welte f80b7d347c bs11_config: makes sure we disconnect properly before exiting 2009-02-19 03:11:13 +00:00
Harald Welte fb81ae9da2 restructure and enhance bs11_config 
* add the concept of commands in addition to options
* add commands for querying essential configuration
* add command for explicit create/delete of TRX1
* software download is now an explicit operation
 2009-02-19 02:59:17 +00:00
Harald Welte 0313394a88 * support BS11 specific IE types in abis_nm 
* make bs11_config compile again 
* now that we have a proper TLV parser, use it to parse the status response on the serial port
 2009-02-18 19:51:53 +00:00
Harald Welte 1fa60c8ab0 * add trau_mux implementation to relay from one incoming TRAU 
channel to another one (simple voice call switching)
* add a way more generic E1 input layer, abstracting out the misdn
  low-level interface. This also adds infrastructure for multiple TRX
  in one BTS, as well as multiple BTS on one E1 link
* add a E1 subchannel multiplexer for sending multiple 16kbit sub-channels
  one one 64kBps E1 channel
* add TRAU IDLE frame generation
* terminate bsc_hack in case there is a E1 / mISDN init error
* introduce 'e1_config.c' file with static configuration of our
  E1 setup (which TRX/BTS is configured for which TEI/SAPI/E1). This should
  later become a config file rather than a compiled C file.

WARNING: all this compiles but is not tested yet.  Expect fix-up committs over
the next hours or so
 2009-02-09 18:13:26 +00:00
Harald Welte 1cbfaf508a * introduce a new '--restart' parameter to reboot BTS 
* unconditionally create TRX1 objects
* wait for '3 Normal' before issuing disconnect
* MBCCU0/MBCCU1 state were accidentially switched
 2009-02-05 19:30:22 +00:00
Harald Welte 6f14691c61 make bs11_config status lines shorter 2009-02-03 02:05:28 +00:00
Harald Welte 7ed1a64d9d * exit program if we cannot set up the serial port 
* leave the program if ctrl+c is pressed three times even without logoff from BTS
 2009-02-02 14:45:49 +00:00
Harald Welte 3ffd1376b7 * add abis_nm_software_load_status() to header file 
* new abis_nm_bs11_bsc_disconnect() function to disconnect BSC/BTS link
* add support for 'forced load' of BS-11 software to abis_nm.c and bs11_config
* remove lots of debug output
* print progress during software load
 2009-02-01 22:15:49 +00:00
Harald Welte c12d52bae4 * improve parsing of status/phase response from BTS 
* split rs232 support into separate file (like misdn.c)
 2009-02-01 21:39:06 +00:00
Harald Welte 268bb40b35 * add more detailed status printout to bs11_config 
* add support for real LMT logon time
* add support for abis external time
* move 'create_trx1_objects' to separate function
 2009-02-01 19:11:56 +00:00
Harald Welte 5e4d1b3663 * rename NM_MT_BS11_LOGOFF to NM_MT_BS11_LMT_LOGOFF 
* add more BS11 specific attributes
* define all valid BS11 PA power classes
* add callback function to software load
* introduce SWL load function for BS-11 style SWL file lists
* separate activation of software from loading of software
* add function to obtain BS-11 serial number
 2009-02-01 13:36:56 +00:00
Harald Welte 043d04a99a * Use new NM_ATT_BS11 definitions instead of magic numbers 
* rename FECTORY_LOGON into LMT_LOGON since it's not always factory level
 2009-01-29 23:15:30 +00:00
Harald Welte 623d53185b bs11_config: 
* disable serial port POST processing
* default delay is 0
* make window size user-configurable (default: 8)
* add missing help line for the --delay option
* don't forget to create the CCLK object as part of minimal config
 2009-01-29 21:14:05 +00:00
Harald Welte 14f0934f0b * use select loop based rx/tx processing in bs11_config 
* improve parsing/generation of fake lapd header
 2009-01-29 19:28:38 +00:00
Harald Welte 3b8ba215b9 * Fix BS11 software download routines in abis_nm.c 
* Introduce user-configurable delay when sending serial msgs from bs11_config
 2009-01-29 12:27:58 +00:00
Harald Welte 071f34d7c6 bs11_config: 
* fix serial port initialization
* add bs11_state enum and work accordingly
 2009-01-29 09:24:38 +00:00
Harald Welte f186c46ff6 bs11_config: add setting of baud rate 2009-01-29 08:45:19 +00:00
Harald Welte cfe6dce248 don't logon twice 2009-01-19 16:06:43 +00:00
Harald Welte 61e42ad7fd add bs11_config as LMT alternative 2009-01-18 19:10:46 +00:00