DB counters has been used to save osmo_counters & osmo_rate_ctr to a local
sqlite databases every 60 seconds.
This is quite slow e.g. 1000 subscriber might slow the msc down.
Change-Id: Id64f1839a55b5326f74ec04b7a5dbed9d269b89c
Later on we want to do extra steps upon receiving a Rx Reset Ack
(checking for Osmux support from peer). Let's move handling of this
message into its own function to have handling implementation in one
place.
Change-Id: I516c4baf6071d26f6c530726d93677bed968efd1
Prepare for Rhizomatica's subscriber on demand use case, in which the
network access is disabled by default for new subscribers, but the IMEI
is required in the HLR to find out which user has which IMSI. Due to the
network access being disabled, the location update request towards the
HLR fails and the MS gets rejected, so we need to get the IMEI early.
Related: OS#2542, OS#3755
Change-Id: I256224194c3b8caf2b58a88d11dccd32c569201f
In ran_a_make_handover_request() we do prevent destination buffer
(r.encryption_information.key) overflow, but not source buffer
(n->geran.chosen_encryption->key) overrun if an incorrect key
length is received. Let's fix this.
Change-Id: I278bb72660634c2d535e1bd3d7fce5696da23575
Fixes: CID#198450 Out-of-bounds access
We basically need to make sure that one of two possible IEs
is not NULL, while another is NULL (eXclusive OR). This can
be done using at least two conditional branches.
Change-Id: Ie0f9b5c1bbbfb744e0615da07d76037d91b0abc8
Fixes: CID#198444 Logically dead code
For some reason, having ternary operator there makes Coverity think
that 'n->geran.chosen_encryption' is dereferenced before checking
against NULL. Let's make it happy, and move the assignment.
Change-Id: I95051d0f02e2fdd3ec8da3a506109e7b23e99b4b
Fixes: CID#198454 Dereference before null check
In gsm48_rx_mm_serv_req() we need to make sure that a given message
buffer is large enough to contain both 'gsm48_hdr' and
'gsm48_service_request' structures.
Comparing msg->data_len with size of pointer if wrong because:
- we actually need to compare with size of struct(s),
- we need msgb_l3len(), not length of the whole buffer.
Moreover, since we have to use the pointer arithmetics in order
to keep backwards compatibility with Phase1 phones, we also
need to check the length of both Classmark2 and MI IEs.
Change-Id: I6e7454d7a6f63fd5a0e12fb90d8c58688da0951e
Since in parse_umts_auth_resp() we are checking the length of
GSM48_IE_AUTH_RES_EXT TLV, we need to print its length, but
not the length of the whole L3.
Change-Id: I2bfebce6d017be834bfe7628ffa2b341eb82c11c
The MSC_A_EV_HANDOVER_END exists as parent term event for the msc_ho_fsm, but
it is not actually required as functional event, since all cleanup is handled
in msc_ho_fsm_cleanup().
That's why I never bothered to add the event to msc_a_fsm, but of course that
means we get an error message after each (successful and unsuccessful)
handover, that the MSC_A_EV_HANDOVER_END is not permitted.
Allow the event and ignore it to silence the error message.
Explain in a comment.
Change-Id: Ie8dc0c0a631b7da43111f329562007766a21b134
After neels/ho was merged, SMS over IuCS/RANAP was failing in both
MO and MT direction. The reason was that all mobile-terminated SMS-CP
layer messages were sent in RANAP with SAPI-0 instaed of SAPI-1.
Change-Id: I98e6eddb52d5c61c4e2d34bdfcd43cf460296ad7
Closes: OS#3993
The event is actually never dispatched and useless, because when an RTP stream
releases, the call_leg terminates directly anyway (which wasn't apparent when
starting to design the call_leg FSM yet).
Change-Id: I6b2fc1225c960fa2f7c46adf241520217a07821c
The SMPP 3.4 specification defines the password field as a
"Variable-length octet string with maximum length of 9", and according
to table 3-1 this means including the terminating NUL-byte.
However, OsmoMSC allows to configure longer passwords in the ESME
configuration. Those passwords will then never match, as libsmpp34
performs length validation and generates a parser error for anyone
trying to send a longer password via SMPP.
The same applies for system-id, where we have to permit only 15
characters with zero termination, but not 16 characters.
Change-Id: I81ef593e84bf1e15f6746386fc145495fae29354
Closes: OS#3166
Instead of calling trans_log_subsys() for each LOG_TRANS() log line, rather
store in trans->log_subsys once on trans_alloc() and use that.
Do not fall back to the RAN's own subsystem (DBSSAP / DIUCS), it makes little
sense and may cause logging to switch subsystems depending on the RAN state.
In trans_log_subsys(), add missing switch cases:
- Log silent call transactions also on CC.
- Log USSD on DMM.
About USSD: we currently have no dedicated USSD logging category. As a result,
after LOG_TRANS() was introduced [1], USSD logged on DBSSAP/DIUCS or DMSC,
depending on whether a RAN was associated with the trans or not. Before that
change, USSD always logged on DMM, so, until we have a separate logging
category for USSD, consistenly use DMM again.
[1] in I2e60964d7a3c06d051debd1c707051a0eb3101ba / ff7074a0c7
Related: coverity CID 198453
Change-Id: I6dfe5b98fb9e884c2dde61d603832dafceb12123
As per 3GPP TS 03.40, section 9.2.3.16 "TP-User-Data-Length (TP-UDL)",
if the TP-User-Data is coded using the GSM 7-bit default alphabet,
the TP-User-Data-Length field indicates the *number of septets*
within the TP-User-Data field to follow. Otherwise, i.e. in case
of 8-bit or UCS-2 encoded data, the *number of octets* is indicated.
Since we store the original TP-UDL value (as received), we might
need to convert septets to octets before passing it to memcpy().
Otherwise this would lead to a buffer overrun.
Also, as we receive TPDU from untrusted source (i.e. subscriber),
the TP-UDL value needs to be checked against the corresponding
maximum (160 septets or 140 octets) and truncated if needed.
Please note that buffer overrun is still possible, e.g. when an
indicated TP-UDL value is grather than the remaining TPDU length.
Preventing this would require adding an additional check.
Change-Id: I4b08db7665e854a045129e7695e2bdf296df1688
Depends-on: (core) I54f88d2908ac47228813fb8c049f4264e5145241
It was noticed that SCCP_RAN_MSG_RESET_ACK message is not freed after
sending. Since ran_peer_rx_reset() calls sccp_ran_down_l2_cl(), which
then calls osmo_sccp_user_sap_down_nofree(), which doesn't free the
message buffer (what's clear from its name).
OsmoMSC# show talloc-context application full filter msgb
full talloc report on 'osmo_msc' (total 20155 bytes in 88 blocks)
msgb contains 4640 bytes in 5 blocks (ref 0)
bssmap: reset ack contains 1160 bytes in 1 blocks (ref 0)
bssmap: reset ack contains 1160 bytes in 1 blocks (ref 0)
bssmap: reset ack contains 1160 bytes in 1 blocks (ref 0)
Let's free it after sending (or in case of error).
Change-Id: Ic174f6eecd6254af597dfbdc1c9e3d65716f0a76
This fixes the following compiler error:
msub.c: In function ‘msub_fsm_active’:
msub.c:85:35: error: ‘msc_role_a_c’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
|| (msc_role_a_c && msc_role_a_c->ran->type == OSMO_RAT_EUTRAN_SGS)))
~~~~~~~~~~~~^~~~~
msub.c:59:26: note: ‘msc_role_a_c’ was declared here
struct msc_role_common *msc_role_a_c;
^~~~~~~~~~~~
Change-Id: Id518dea77d01ed0518ca7cba6b1b363f1c8e6543
While developing the inter-MSC handover refactoring, I was annoyed by the fact
that mncc_tx_to_cc() receives an MNCC message struct containing a msg_type, as
well as a separate msg_type argument, which may deviate from each other. So, as
a first step I wanted to make sure that all callers send identical values for
both by inserting an OSMO_ASSERT(msg_type == msg->msg_type). Later I was going
to remove the separate msg_type argument.
I then forgot to
- carry on to remove the argument and
- to actually test with internal MNCC (it so happens that all of our ttcn3
tests also use external MNCC).
As a result, the "large refactoring" patch for inter-MSC Handover breaks
internal MNCC operation.
Fix that: remove the separate msg_type argument and make sure that all callers
of mncc_tx_to_cc() indeed pass the desired msg_type in msg->msg_type, and hence
also remove the odd duality of arguments.
Various functions in mncc_builtin.c also exhibit this separate msg_type
argument, which are all unused and make absolutely no sense. Remove those as
well.
Related: OS#3989
Change-Id: I966ce764796982709ea3312e76988a95257acb8d
We are just introducing smpp34_set_memory_functions() in libsmpp34
to allow applications like OsmoMSC to provide their own heap allocator
callback functions. Let's used this to integrate with talloc and
hence allow talloc tracking/debugging for libsmpp34 internal
allocations.
Depends: libsmpp34 Change-Id I3656117115e89638c093bfbcbc4369ce302f7a94
Change-Id: Ie2725ffab6a225813e65768735f01678e2022128
Related: OS#3913
Get rid of the legacy name bscconfig.h from osmo-nitb times.
Remove the #include from some of the files that aren't actually using it.
Instead of '#include "../../config.h"', use plain '#include "config.h"'
because we're anyway passing $top_srcdir as -I during compilation.
Change-Id: Id4f683be1f36f0630c83da54e02868aae847aeec
Before, I was testing with osmo-hlr patch
I01a45900e14d41bcd338f50ad85d9fabf2c61405 applied, but that patch is currently
in an abandoned state.
This is the counterpart implemented in osmo-msc: always include the terminating
nul char in the "blob" that is the MSC IPA name.
The dualities in the formats of routing between MSCs is whether to handle it as
a char*, or as a uint8_t* with explicit len (a blob).
In the VTY config to indicate target MSCs for inter-MSC handover, we have
strings. We currently even completely lack a way of configuring any blob-like
data as a VTY config item.
In osmo-hlr, the IPA names used for routing are currently received as a char*
which *includes* the terminating nul char. So in osmo-msc, if we also always
include the nul char, it works.
Instead, we could just send the char* part without the nul char, and apply
above mentioned osmo-hlr patch. That patch would magically match a name that
lacks a nul with a name that includes one. I think it is better to agree on one
format on the GSUP wire now, instead of making assumptions in osmo-hlr on the
format of the source/target names for routing. This format, from the way GSUP
so far transmits the IPA SERNO tag when a client attaches to osmo-hlr, happens
to include the terminating nul char.
Change-Id: I9ca8c9eef104519ed1ea46e2fef46dcdc0d554eb
3GPP TS 49.008 '4.3 Roles of MSC-A, MSC-I and MSC-T' defines distinct roles:
- MSC-A is responsible for managing subscribers,
- MSC-I is the gateway to the RAN.
- MSC-T is a second transitory gateway to another RAN during Handover.
After inter-MSC Handover, the MSC-I is handled by a remote MSC instance, while
the original MSC-A retains the responsibility of subscriber management.
MSC-T exists in this patch but is not yet used, since Handover is only prepared
for, not yet implemented.
Facilitate Inter-MSC and inter-BSC Handover by the same internal split of MSC
roles.
Compared to inter-MSC Handover, mere inter-BSC has the obvious simplifications:
- all of MSC-A, MSC-I and MSC-T roles will be served by the same osmo-msc
instance,
- messages between MSC-A and MSC-{I,T} don't need to be routed via E-interface
(GSUP),
- no call routing between MSC-A and -I via MNCC necessary.
This is the largest code bomb I have submitted, ever. Out of principle, I
apologize to everyone trying to read this as a whole. Unfortunately, I see no
sense in trying to split this patch into smaller bits. It would be a huge
amount of work to introduce these changes in separate chunks, especially if
each should in turn be useful and pass all test suites. So, unfortunately, we
are stuck with this code bomb.
The following are some details and rationale for this rather huge refactoring:
* separate MSC subscriber management from ran_conn
struct ran_conn is reduced from the pivotal subscriber management entity it has
been so far to a mere storage for an SCCP connection ID and an MSC subscriber
reference.
The new pivotal subscriber management entity is struct msc_a -- struct msub
lists the msc_a, msc_i, msc_t roles, the vast majority of code paths however
use msc_a, since MSC-A is where all the interesting stuff happens.
Before handover, msc_i is an FSM implementation that encodes to the local
ran_conn. After inter-MSC Handover, msc_i is a compatible but different FSM
implementation that instead forwards via/from GSUP. Same goes for the msc_a
struct: if osmo-msc is the MSC-I "RAN proxy" for a remote MSC-A role, the
msc_a->fi is an FSM implementation that merely forwards via/from GSUP.
* New SCCP implementation for RAN access
To be able to forward BSSAP and RANAP messages via the GSUP interface, the
individual message layers need to be cleanly separated. The IuCS implementation
used until now (iu_client from libosmo-ranap) did not provide this level of
separation, and needed a complete rewrite. It was trivial to implement this in
such a way that both BSSAP and RANAP can be handled by the same SCCP code,
hence the new SCCP-RAN layer also replaces BSSAP handling.
sccp_ran.h: struct sccp_ran_inst provides an abstract handler for incoming RAN
connections. A set of callback functions provides implementation specific
details.
* RAN Abstraction (BSSAP vs. RANAP)
The common SCCP implementation did set the theme for the remaining refactoring:
make all other MSC code paths entirely RAN-implementation-agnostic.
ran_infra.c provides data structures that list RAN implementation specifics,
from logging to RAN de-/encoding to SCCP callbacks and timers. A ran_infra
pointer hence allows complete abstraction of RAN implementations:
- managing connected RAN peers (BSC, RNC) in ran_peer.c,
- classifying and de-/encoding RAN PDUs,
- recording connected LACs and cell IDs and sending out Paging requests to
matching RAN peers.
* RAN RESET now also for RANAP
ran_peer.c absorbs the reset_fsm from a_reset.c; in consequence, RANAP also
supports proper RESET semantics now. Hence osmo-hnbgw now also needs to provide
proper RESET handling, which it so far duly ignores. (TODO)
* RAN de-/encoding abstraction
The RAN abstraction mentioned above serves not only to separate RANAP and BSSAP
implementations transparently, but also to be able to optionally handle RAN on
distinct levels. Before Handover, all RAN messages are handled by the MSC-A
role. However, after an inter-MSC Handover, a standalone MSC-I will need to
decode RAN PDUs, at least in order to manage Assignment of RTP streams between
BSS/RNC and MNCC call forwarding.
ran_msg.h provides a common API with abstraction for:
- receiving events from RAN, i.e. passing RAN decode from the BSC/RNC and
MS/UE: struct ran_dec_msg represents RAN messages decoded from either BSSMAP
or RANAP;
- sending RAN events: ran_enc_msg is the counterpart to compose RAN messages
that should be encoded to either BSSMAP or RANAP and passed down to the
BSC/RNC and MS/UE.
The RAN-specific implementations are completely contained by ran_msg_a.c and
ran_msg_iu.c.
In particular, Assignment and Ciphering have so far been distinct code paths
for BSSAP and RANAP, with switch(via_ran){...} statements all over the place.
Using RAN_DEC_* and RAN_ENC_* abstractions, these are now completely unified.
Note that SGs does not qualify for RAN abstraction: the SGs interface always
remains with the MSC-A role, and SGs messages follow quite distinct semantics
from the fairly similar GERAN and UTRAN.
* MGW and RTP stream management
So far, managing MGW endpoints via MGCP was tightly glued in-between
GSM-04.08-CC on the one and MNCC on the other side. Prepare for switching RTP
streams between different RAN peers by moving to object-oriented
implementations: implement struct call_leg and struct rtp_stream with distinct
FSMs each. For MGW communication, use the osmo_mgcpc_ep API that has originated
from osmo-bsc and recently moved to libosmo-mgcp-client for this purpose.
Instead of implementing a sequence of events with code duplication for the RAN
and CN sides, the idea is to manage each RTP stream separately by firing and
receiving events as soon as codecs and RTP ports are negotiated, and letting
the individual FSMs take care of the MGW management "asynchronously". The
caller provides event IDs and an FSM instance that should be notified of RTP
stream setup progress. Hence it becomes possible to reconnect RTP streams from
one GSM-04.08-CC to another (inter-BSC Handover) or between CC and MNCC RTP
peers (inter-MSC Handover) without duplicating the MGCP code for each
transition.
The number of FSM implementations used for MGCP handling may seem a bit of an
overkill. But in fact, the number of perspectives on RTP forwarding are far
from trivial:
- an MGW endpoint is an entity with N connections, and MGCP "sessions" for
configuring them by talking to the MGW;
- an RTP stream is a remote peer connected to one of the endpoint's
connections, which is asynchronously notified of codec and RTP port choices;
- a call leg is the higher level view on either an MT or MO side of a voice
call, a combination of two RTP streams to forward between two remote peers.
BSC MGW PBX
CI CI
[MGW-endpoint]
[--rtp_stream--] [--rtp_stream--]
[----------------call_leg----------------]
* Use counts
Introduce using the new osmo_use_count API added to libosmocore for this
purpose. Each use token has a distinct name in the logging, which can be a
globally constant name or ad-hoc, like the local __func__ string constant. Use
in the new struct msc_a, as well as change vlr_subscr to the new osmo_use_count
API.
* FSM Timeouts
Introduce using the new osmo_tdef API, which provides a common VTY
implementation for all timer numbers, and FSM state transitions with the
correct timeout. Originated in osmo-bsc, recently moved to libosmocore.
Depends: Ife31e6798b4e728a23913179e346552a7dd338c0 (libosmocore)
Ib9af67b100c4583342a2103669732dab2e577b04 (libosmocore)
Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Ie9e2add7bbfae651c04e230d62e37cebeb91b0f5 (libosmo-sccp)
I26be5c4b06a680f25f19797407ab56a5a4880ddc (osmo-mgw)
Ida0e59f9a1f2dd18efea0a51680a67b69f141efa (osmo-mgw)
I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I27e4988e0371808b512c757d2b52ada1615067bd
Avoid deprecation warning: use gsm48_decode_bcd_number2() instead of
gsm48_decode_bcd_number().
Validate the return value and add error handling.
Change-Id: Ibef71c46d72d2d43123e68f73e5ed554a69243d8
In smpp_openbsc.c submit_to_sms(), "get" the appropriate use count upon
assigning sms->receiver, fixing a -1 use count upon sms_free().
Also, avoid a "put" of a NULL subscriber in the same function.
Related: OS#3930
Change-Id: Idaf01cd3cfa08088ce0d543d0576db957dc94262