Along goes GSM_KEYSEQ_INVAL as VLR_*.
It's where it logically belongs, and is almost the only reason why vlr.h
includes gsm_data.h. The remaining reason, GSM_EXTENSION_LENGTH, will be moved
by upcoming patch.
Change-Id: I122feae7ee3cbc59e941daef35a954bce29fec76
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
the function vlr_subscr_req_lu() has a parameter is_ps, which is set
to vsub->vlr->cfg.is_ps by the only caller in vlr_lu_fsm.c. Inside the
function one can see that vsub->vlr->cfg.is_ps is used directly to
decide between PS or CS LU, we could also use is_ps there. Presumably
the parameter is_ps had been abandonned in an early development stage
and was not removed, so lets drop the parameter.
Change-Id: Id239721773b90099d122b232dae1ba457be9d255
Give the HLR a chance to send us updated subscriber data by indicating the CN
domain to be Circuit Switched, only during a LU Request GSUP message.
Adjust msc_vlr_tests to expect the added GSUP CN domain IE to indicate CS, i.e.
append '280102'.
Related: OS#3601
Change-Id: I0c2d33fbfdb4728e480679120d06b7f3a2ccfd76
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-msc and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
Some internal sub-systems, such as SS/USSD or SMS implementation,
may also need to use GSUP connection with HLR. Previously, it was
only available within the libvlr code, and nowhere else.
Let's introduce the generic GSUP message router, which will
receive messages unhandled by VLR itself, and route them to
a handler depending on the message type.
Change-Id: Ib8146ce5788c8f249dcaa39d61bd0388574bf892
Overlong IMSIs in ID RESP messages were accepted and used in
truncated form.
Log an error when truncation occurs, and prevent truncated IMSIs
from being installed for a subscriber via ID RESP messages.
Other code paths leading to vlr_subscr_set_imsi() with truncated
IMSIs will only a leave a trail of log entries for now, because
vlr_subscr_set_imsi() is currently unable to return an error code.
Change-Id: I785c994f41a646d8d83d3d82f5a9ae6b572eb641
Related: OS#2864
Remove subscribers which fail to send periodic Location Updates from the
list of subscribers known to the VLR. This complements the IMSI detach
procedure: periodic LU expiry triggers an implicit IMSI detach.
Expired subscribers are purged from a periodic timer which iterates
over all subscribers once per minute.
Subscribers with an active connection do not expire. This is controlled
by the subscriber conn FSM which sets a subscriber's the LU expiry timeout
value to GSM_SUBSCRIBER_NO_EXPIRATION while a connection is active.
Add support for fake time with osmo_clock_gettime() to msc_vlr tests.
This functionality existed in OpenBSC but was lost during the nitb split.
This code took some inspiration from the OpenBSC implementation.
Related: OS#1976
Change-Id: Iebdee8b12d22acfcfb265ee41e71cfc8d9eb3ba9
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
Drop tall_bsc_ctx; in mncc_sock_init(), talloc the mncc_sock_state from
gsm_network.
In tests or utils, move from using an extern tall_bsc_ctx to a local root
context pointer.
Change-Id: I92c252be1d1e7634f1653de47d37c99d77d9501c
Check and handle gracefully any error which might appear in
osmo_gsup_encode() - mark corresponding functions with
warn_unused_result attribute to make sure this failure is always checked
against.
Change-Id: I4551212011fb0bd898c020a183756ed7a9afb9e5
Related: OS#2864
We don't usually put space before in-place increment or decrement. Let's
make code look similar to other Osmocom projects.
Change-Id: I5962431ad16c97e412939dc1b8949f6361a5c26e
Using following semantic patch:
@@ expression A, B, C; @@
- osmo_strlcpy(A, B, sizeof(A));
+ OSMO_STRLCPY_ARRAY(A, B);
Which was applied using following command:
spatch --dir src -I src --sp-file strlcpy.spatch --in-place --recursive-includes
All the calls to osmo_strlcpy() which use destination buffer obtained
via sizeof() were replaced with the corresponding wrapper macro.
Change-Id: I67b482dedfa11237ac21894fc5930039e12434ab
Related: OS#2864
The VLR code seems to have the assumption that there is one particular
algorithm to be used, as opposed to one of a set of algorithms.
What's missing is basically to decide when/where to pick the best
algorithm within the capabilities of the phone (classmark) and the
network configuration (net->a5_encryption_mask). So far, libvlr has no
notion of classmark. Rather, libmsc has.
Why does the VLR care about the particular algorithm at all? The VLR
should probably simply decide if it should use encryption or not, and if
so, the MSC will figure which algorithm to use.
Change-Id: I5ed80ca2086560a5975a758ec568a034a9a8ab89
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
To decide (in an upcoming patch) whether to use UMTS AKA derived Kc or the Kc
from the auth vector, the set_ciph_mode() from vlr_ops needs to know whether
UMTS AKA is being used. This could possibly derived from the msc_conn_ref, but
all flags are already available in the vlr_lu_fsm and vlr_access_req_fsm. Hence
add a umts_aka flag to the set_ciph_mode() callback invocation. The VLR FSMs
thus decide whether UMTS AKA or GSM AKA is to be used during Ciphering Mode
Command, which makes more sense than re-implementing the same decision process
in the MSC.
I considered placing the Kc derivation in vlr_set_ciph_mode() and only tell the
MSC's set_ciph_mode() implementation the precise keys it should use, but the
RAN particulars, and whether a Kc is used at all, rather belong with the MSC.
Related: OS#2745
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I983c48347faf4ee1b405d8174b4e006c904157cf
During Set Ciphering Mode on GERAN, it is required to know whether UMTS AKA is
used to decide which Kc to pick. Change static function is_umts_auth() into
public vlr_use_umts_aka(), so future patches can re-use it.
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I85d784c62ecbabdb6186a3dae4dcd554e7921041
Terminating one of the FSM instances may effect termination and deallocation of
the others, as well as the vlr_subscr itself. So, reserve the vlr_subscr
locally, and then dispatch events to exactly those FSM instances that exist.
The changes in expected output in the msc_vlr_tests shows that the subscriber
was deallocated from the first FSM termination, and now sticks around until
we've checked both FSMs are gone.
Change-Id: I56551ecc10f5295fe75944bdde4b583b1b621811
osmo_gsup_decode() doesn't actually decode everything, it does leave quite a
number of pointers into the original msgb. Hence we must not deallocate the
gsup msgb before dispatching GSUP events.
Move msgb_free() to the bottom of vlr_gsupc_read_cb() and use rc and gotos to
early-exit if needed.
Change-Id: I16fc92dcf84e29fcf34712a2e8b0464ef08425ad
When using ciphering, the TMSI is an important part of the ciphering. To guard
against users forgetting to set 'assign tmsi' in the config and compromising
their ciphering unknowingly, the default should be to use a TMSI.
To optimize in an unencrypted network, 'no assign tmsi' config can still switch
off TMSI use.
Change-Id: If115e95bebc314bedb50faf3993b52071fee5c1e
Add required msgb_free() to vlr_gsupc_read_cb().
Adjust msc_vlr_tests.c gsup_rx() to *not* free the msgb again after
vlr_gsupc_read_cb() did.
Related: OS#2476
Change-Id: I347c53f57a7fa79921aed3f6e42599841acf27c0
The MSC should not fiddle with low-level SI details like rest octets
anyway. Unfortunately simply removing the header is impossible as it
causes massive fallout due to missing includes. Fixed it as well.
The only other parameter which required removal is cell_ro_sel_par which
is not referenced anywhere in the code anyway.
Change-Id: Ibff77330de056fad4288cd4c48d016aad8105354
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
Neels Hofmeyr
Philipp Maier
Harald Welte
Neels Hofmeyr