Since the I697639d8469e5dda617b27995c4a92e1f0c0bead, call
independent SS messages are also supported by
gsm48_pdisc_msgtype_name().
So, instead of 'NCSS:0x3b' it will return 'GSM0480_MTYPE_REGISTER'.
Let's correct the expected message names.
Change-Id: If9e854ee84882d104cf2ffaceb3862fda6862f19
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
In the subscr_conn_fsm instance's ID, include the Complete Layer 3 type, so
that we can see on the first glance whether a state transition belongs to MO or
MT.
The huge patch is due to the cosmetic change affecting nearly every single log
line in the msc_vlr_tests, by nature of changing the FSM's ID.
Related: OS#3122
Change-Id: I2a7e27e0f16df1872dcda64cb928c3b8528ea3f7
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
So far we hit a running T308 during CC release when caused by a BSSMAP Clear
Request, and we loudly log that as error.
However, now I understand that T308 is a direct cause of the dispatch of a REL
IND towards MNCC, which is used to indicate teardown to MNCC. So during
_gsm48_cc_trans_free(), we first clear all timers, then invoke
mncc_release_ind() which starts another timer (useful for graceful CC Release,
but in this code path the intention is immediate release). Simply immediately
cancel the timer again and release the conn.
A separate question is whether a BSSMAP Clear Request should be less aggressive
in releasing the connections; i.e. instead of calling trans_free() all around,
to rather ask each transaction to "please stop soon", somehow.
Related: OS#3062
Change-Id: I231fdb574a086a206321148474cbdc7ca9cf39f0
In the old days, OsmoNITB couldn't process any SMS that wasn't between
two subscribers on the same NITB.
We've long re-worked the internals in order to process SMS with
arbitrary sender MSISDN (e.g. from SMPP). However, the VTY command
"subscriber ... sms" was never updated, it seems.
Change-Id: I62b17e0a67989484415f0df2c8cb4ff1f94dbf2b
Closes: OS#3151
The current msc_subscr_con_allocate() was in fact only used by msc_vlr_tests,
while both a_iface_bssap.c and iucs.c did their own duplicate code of
allocating the gsm_subscriber_connection struct. Unify.
Drop the old msc_subscr_con_allocate(), instead add msc_subscr_conn_alloc().
The new function also takes via_ran and lac arguments directly.
The conn allocation will soon be closely tied to the subscr_conn_fsm instance
allocation, so place the new function definition alongside the other
subscr_conn_fsm API, and match its naming ("conn").
Related: OS#3122
Change-Id: Ia57b42a149a43f9c370b1310e2e1f512183993ea
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
I broke this test during dev and saw the failure being noticed only in the next
test when DTAP is expected again. Verify success right there, instead.
Change-Id: Ifdde3a6fa5835203c34c40db77761f2e90c0d5ff
Since the logging allocations now also show up in the root context report, some
tests need adjusted talloc checks.
In msc_vlr_tests, also output the number of talloc blocks before tests are
started to show that the number didn't change after the tests.
Change-Id: Iae07ae60230c7bab28e52b5df97fa3844778158e
All that is left in libcommon now are the GSUP and OAP client implementations.
These are duplicated in osmo-sgsn.git and make sense to remain somewhat
separate from libmsc. So now they get their own little lib.
Change-Id: Ic71aa119c233b6a0ae169a5b2a53819903d2be82
Drop tall_bsc_ctx; in mncc_sock_init(), talloc the mncc_sock_state from
gsm_network.
In tests or utils, move from using an extern tall_bsc_ctx to a local root
context pointer.
Change-Id: I92c252be1d1e7634f1653de47d37c99d77d9501c
Apply more concise logging categories in each main scope. The bulk goes to
msc_main.c, obviously, while tests and utils get a slimmed down bunch of
logging categories.
Change-Id: I969a0662ba273f3721b6820d02151b7a5b8014b8
In trans_free(), call subscr_conn_release_when_unused(), so that we are sure to
clean up after the last transaction is done.
This fixes an error where a conn lingered after a CC failure, because that code
path forgot to trigger cleanup.
Rationale: so far we were triggering the release check after each DTAP dispatch
(compl_l3 and "normal" DTAP), which is sufficient for properly closed
transactions. We also need a check for when a timeout clears an erratic trans.
Adjust test expectation of test_call_mo_to_unknown_timeout to show that the
error is now fixed.
msc_vlr_test_reject_concurrency now sees an additional release checking event
when the SMS transaction is done, which is expected and does not affect the
test otherwise.
Related: OS#2779
Change-Id: I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb
These tests helped to debug issue OS#2779. Now that they're here we might as
well keep them.
The test test_call_mo_to_unknown shows that an MS answering to the Release
Request works as it should: the conn is torn down.
The test test_call_mo_to_unknown_timeout currently expects the error: the conn
remains active if the CC Release times out. This bug and the test expectations
will be fixed in I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb.
Change-Id: Ic3c84520bff8c3fc82512d03ff6ab97d21b8fb7a
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
There are a number of bad failures in CC teardown handling we're solving. It
helps to see CC logging in the msc_vlr_tests.
Change-Id: I56ac269d46b48b6b85efad81c4d2343bfc41ea90
Also indicate in msc_vlr_test_gsm_authen.c that we're indeed sending no
capability to do R99 in the Classmark 1 during LU request.
Change-Id: Id79a77ca1f218d55dad21d9dd3de92445fb5d6bf
See also change-id I72a1dbb30e0a39dbf4b81c7e378d5607b62e10d3 in
osmo-ttcn3-hacks.git, which adds a similar test to the MSC_Tests.ttcn suite.
Writing this test helped me fix the issue faster, why not keep it now that it's
there.
Related: OS#2947
Change-Id: Iba56556207cf6e79e6531b0e7dd3eaec28fb5eaa
The code deciding on whether UMTS AKA is used was cascaded and convoluted. By
flattening the decisions, they become easier to read and possibly catch more
weird corner cases / log information more clearly.
- First decide what AKA the RES length reflects.
- Then decide whether all prerequisites for UMTS AKA are satisfied.
- Finally, on UTRAN, turn down the auth if we don't have UMTS AKA, and neatly
log all of the potential causes.
One corner case that should never occur is that the UMTS AKA RES length is
actually the same length as the GSM AKA SRES. If this nevertheless occurs, log
this as an error, though not turning down authentication because of it. (The
effect is that we would favor UMTS AKA when it has a res_len == sizeof(sres)
and would not succeed to GSM AKA. At least the log will tell us why, now.)
Adjust an expected test output, trivial logging difference.
Change-Id: I43f7f301ea85e518bac91f707391a53182e54fab
Instead of just closing down the conn hard, actually feed invalid auth response
data to vlr_subscr_rc_auth_resp() in order to trigger all the actions we want
to see with a failed authentication:
- a GSUP signal that the auth failed,
- a LU reject.
Verify this in new test_wrong_sres_length() in msc_vlr_test_gsm_authen.c.
Note that in gsm48_rx_mm_auth_resp(), the is_r99 flag is falsely derived from
the RES length, which upcoming commit Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
will fix.
Change-Id: I4179a290069ac61d0662de4ec7ca3edb76988899
Switch by vsub->sec_ctx to use the proper Kc for ciphering.
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. The VLR already stores
whether the MS replied with a GSM AKA SRES or a UMTS AKA RES in vsub->sec_ctx.
So far, though, we were always using the UMTS AKA Kc just because the USIM and
core net are capable of it, ignoring the choice the MS might have made in the
Authentication Response.
In msc_vlr_test_gsm_ciph, fix the test expectations to the correct GSM AKA Kc
keys, showing that all of LU, CM Service Request and Paging Response now
support MS choosing GSM AKA in a UMTS capable environment.
Related: OS#2793
Change-Id: I42ce51ae979f42d173a45ae69273071c426bf97c
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. In that case, we must
make sure to send the GSM AKA Kc for ciphering.
Add test_gsm_ciph_in_umts_env() to msc_vlr_test_gsm_ciph.c to answer an Auth
Request with a GSM AKA response (see the log stating "AUTH established GSM
security context" after we sent a UMTS AKA challenge).
In the test, show that we currently send the *wrong* Kc, i.e. the UMTS AKA
derived Kc for GERAN, instead of the correct Kc for GSM AKA (which was received
from the HLR in the auth tuples).
Subsequent patch I42ce51ae979f42d173a45ae69273071c426bf97c will fix this and
correct the test expectations.
Related: OS#2793
Change-Id: I85f12a20dcd701e671188e56811ec7b58d84da82
Clearly distinguish between Ciphering Mode Command on GERAN and Security Mode
Control on UTRAN.
Cosmetic: explicitly verify the key strings in the testing code (not only in
the expected output).
Change-Id: Ica93ed06c4c63dc6768736d25231de8068001114
Actually call msc_vlr_set_ciph_mode() and wrap away a_iface_tx_cipher_mode()
and ranap_iu_tx_sec_mode_cmd(). Hence we'll see decisions and errors in
msc_vlr_set_ciph_mode() as well.
Change-Id: Id23bc245d4b5707edcd27c44db272fbb211bf9bd
All functions in the individual msc_vlr_test_*.c files should be static; hence
we would be warned if one of them were unused (forgotten to add to the tests
array).
Change-Id: Ia169c6a1443a48879ab4777e09c2040c48810bf6
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ibcd1cc38f170895305ae176a5574384c74a33939
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
That's a preparation step for properly splitting main function of
different tests in follow-up function.
Change-Id: I68a2e94cf79fcb83286eef981a8d88bdbe10ef69
Related: OS#2864
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
Having while(0) as a body for for() cycle generate too much WTF while
looking at the code while not serving any obvious purpose. Let's just
drop it to avoid confusing developers.
Change-Id: I1f571ec319ff3231fd9acd4066e470476c3b1f78
Related: OS#2864
Don't fail tests using thwart_rx_non_initial_requests() via
OSMO_ASSERT. Instead log extended error which will fail the test
eventually but allows to gather additional info helpful for debugging.
Change-Id: I2607cb1ac60941dbc22fca532ed2b3738bfbcc63
Related: OS#2864
Print the IMSI used for each test. This enables expansion to tests with
several IMSIs in follow-up patches.
Change-Id: I7958608e5136351f7b7c0c57fe79791d989ce9c3
Related: OS#2864
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
We don't usually put space before in-place increment or decrement. Let's
make code look similar to other Osmocom projects.
Change-Id: I5962431ad16c97e412939dc1b8949f6361a5c26e
Vadim Yanitskiy
Harald Welte