For MT call, initialize the codecs filter and apply the
Codec List (BSS Supported) from Compl L3.
Related: SYS#5066
Change-Id: I530409a64d11da48518a3dc60aa3a4e47c384663
This option should be used for any executables which are used only
for testing, or for generating other files and are consequently never
installed. By specifying this option, we are telling Libtool that
the executable it links will only ever be executed from where it is
built in the build tree. Libtool is usually able to considerably
speed up the link process for such executables.
Also take a chance to add the missing $(COVERAGE_LDFLAGS).
Change-Id: I664a9d5abed2777deee302f9d3afd1bbfde7a844
Omit "in state FOO", because LOG_TRANS() already logs the state.
Most MNCC "rx" logging was duplicated. Log "rx" only once.
If there is RTP information passed with the MNCC message, log it:
- if there is SDP, log the SDP information.
- if there is no SDP, log the legacy MNCC RTP fields, if any.
One motivation to do this is to get RTP information in ladder diagrams
generated by msc_log_to_ladder.py without the need to add udtrace MNCC
logging to osmo-msc; and also to get RTP info for internal MNCC, where
udtrace doesn't apply, because no unix domain socket is involved in
internal MNCC operation.
Change-Id: I4b916cb482ed441b508c6295de211a21c49cd5c1
When the HLR fails to return auth info and authentication and ciphering
are configured to be optional, fall back to no-auth.
This patch concludes a series of preparatory patches and implements the
actual functional change.
Related: OS#4830
Change-Id: I5feda196fa481dd8a46b0e4721c64b7c6600f0d1
Add third outcome of auth_fsm: the no_auth_info_event, which should be
dispatched when auth failed because the HLR has no auth info for this
subscriber, i.e. not because an actual auth challenge failed.
No functional change: Handling no_auth_info_event separately follows in
another patch (to allow fallback to no-auth). Feed the same
_E_AUTH_FAILURE as no_auth_info_event to still behave unchanged.
Related: OS#4830
Change-Id: I5103b1f2727f1729a5517ae359df813d50436ed3
Previous patch added the AUTH_FAILURE event, which means that the
AUTH_RES event now only signals success. Reflect that in the name.
No functional change.
Related: OS#4830
Change-Id: I7124a3591fcf36cee06d7488eeb94f9b85af5dc2
Explicitly send distinct parent events on auth success and failure. So
far determining success depended only on the data pointer passed on with
the event. Distinct events clarify the logging and the FSM code.
This prepares for a third FSM outcome to be added in a subsequent patch,
to separately signal when the HLR has no auth data.
No functional change.
Related: OS#4830
Change-Id: I02776dfe6785983f2ebe398f57867f5ceb288ba0
Since call_leg_fsm_releasing_onenter() calls immediatelly
osmo_fsm_inst_term(), it meant we couldn't receive any event in that
state because osmo_fsm disables event dispatching to FSMs being
terminated.
As a result, CALL_LEG_EV_MGW_ENDPOINT_GONE was never received and hence
call_leg_mgw_endpoint_gone() was never called, which means the
mgcp_client used in cl->mgw_endpoint was never put back to the pool.
By first freeing all the children (rtp_streams), we make sure
cl->mgw_endpoint ends up with no conns and sends us the GONE event
before we go ourselves into termination state.
Related: SYS#5987
Change-Id: I2126578c4e64c9f336e8a1f6ee98de970866b8dc
Large RAN installations may benefit from distributing the RTP voice
stream load over multiple media gateways.
libosmo-mgcp-client supports MGW pooling since version 1.8.0 (more than
one year ago). OsmoBSC has already been making use of it since then (see
osmo-bsc.git 8d22e6870637ed6d392a8a77aeaebc51b23a8a50); lets use this
feature in osmo-msc too.
This commit is also part of a series of patches cleaning up
libosmo-mgcp-client and slowly getting rid of the old non-mgw-pooled VTY
configuration, in order to keep only 1 way to configure
libosmo-mgcp-client through VTY.
Related: SYS#5091
Related: SYS#5987
Change-Id: I7670ba56fe989706579224a364595fdd4b4708ff
As part of preparation for libosmo-netif migration let's move common SMPP code
into separate build-time library and use it for both smpp_mirror and OsmoMSC
renaming the files if necessary.
While at it we also fix id/password legth limits in smpp_mirror and drop unused
fields from ESME struct.
Related: OS#5568
Change-Id: I61910651bc7c188dc2fb67d96189a66a47e7e8fb
Looking at 'perf top' of osmo-msc under load shows that there's a
significant amount of time spent in terms of locking (mutex,...)
which is useless as osmo-msc is a single-threaded application.
Unfortunately libdbi doesn't provide a mechanism to perform
sqlite3_config(), so we have to do it directly here, introducing an
explicit build-time dependency (and linkage) to libsqlite3.
Related: OS#5559
Change-Id: I5bbea90d28b6d73b64b9e5124ff59304b90a8a75
With comments, clarify the code paths where a CM Service use count has
not yet been placed on the conn (just send CM Service Reject) and where
the use count is placed (decrement count on CM Service Reject).
Place the CM Service use count slightly earlier:
- it is then correctly present when checking the mobile identity in
cm_serv_reuse_conn(), avoiding the crash reported in OS#5532.
- there is only one place incrementing the use count instead of two.
Related: OS#5532
Change-Id: I6c735b79b67108bcaadada3f01c7046e262f939b
When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: I13b519e61ca0d9ce038e8c989ddac012de4a6c61
RAB Assignment Complete contains no codec info, hence
assignment_complete.codec is not set and
assignment_complete.codec_present is false.
As a result a wrong value is passed to rtp_stream_set_codec.
This fixes osmo-msc sending "a=rtpmap:112 AMR/8000/1" during MDCX in the
RAT-side connection of the call leg after having properly sent
VND.3GPP.IUFP/16000 in CRCX.
Change-Id: Ic028d35893d29f7d72f22f82ef89695229c9b01b
This way the MGW knows it has to handle IuUP in that connection (answer
IuUP Initialization, etc.).
Depends: osmo-mgw.git 1de5ed6f979bd4c1380789c9a82f8e396f05c5f8
Change-Id: I7aca671e00ed27ac03f0d106b5a6b665a9bed4c1
Ciphering is optional in both GERAN and UTRAN, however for the later
it's *required* to enable integrity protection for the signalling.
Thus we must always send Security Mode Command in UTRAN, even in
case if ciphering is disabled (UEA0) in the configuration.
The actual decision whether to send CMC/SMC or not is taken in:
* vlr_access_req_fsm.c / _proc_arq_vlr_node2(), and
* vlr_lu_fsm.c / vlr_loc_upd_post_auth().
depending on the value returned by is_ciph_required(). Let's
rename this function to is_cmc_smc_required() and ensure that
it always returns true in UTRAN.
This change fixes the Iu test cases in ttcn3-msc-test.
Change-Id: I6205f13453eff7afbf25e013d72ae98a78fcd31b
Fixes: OS#5333
RANAP Security Command can include an encryption IE. If it includes
it the RNC can still ignore it (e.g. unsupported encryption) and
return the Security Command Complete with an choosen encryption IE:
"no encryption".
Validate the encryption element and ensure the encryption is included in
the encryption mask.
Closes: OS#4144
Change-Id: Icfc135c8b8ae862defe7114db492af600c26407f
Allow the user fine-grained control over which UMTS encryption
algorithms are permitted, rather than always permitting UEA1 and UEA2
or neither.
This brings the handling of UEA in line with the handling of A5 for
GERAN.
Change-Id: I91f9e50f9c1439aa19528f887b83ae9de628fcfd
Closes: OS#4144
Depends: osmo-iuh.git I6d2d033b0427bdc84fee61e0f3cb7b29935214bf
The log output of libosmo-mgcp-client has changed. This change causes
the unit tests to fail because the log output does not match anymore.
Lets disable the DLMGCP log output since it is of minor importance
for VLR testing anyway.
Change-Id: Id197e4ab9ba12e284299ef520edee9c362513bf1
Related: SYS#5091
As seen in a running osmo-msc:
"vlr_access_req_fsm.c:153
msc_a(IMSI-....:MSISDN-...:TMSI-0x...:GERAN-A-8:CM_SERVICE_REQ){MSC_A_ST_RELEASING}:
Event MSC_A_EV_CN_CLOSE not permitted"
Also seen in several unit tests, which need update.
The action event handler for that state is actually already
expecting/handling the event by ignoring it, so we should allow it.
Change-Id: I4d30cffab693529aab3ba736419dec116a4dd7ef
Let's disable category here since we don't care about its formatting here.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Change-Id: I089c0001fc75e81558c3e860827e4d434cf1eab3
Related: OS#5034
Calling gsm48_cc_tx_release() before mncc_release_ind() has a side
effect: the former may change CC state to GSM_CSTATE_RELEASE_REQ.
This makes the later send MNCC_REL_CNF instead of MNCC_REL_IND, so
if one of the call leg disconnects due to RF failure, the other one
will not be terminated correctly.
Makes both TC_{mo,mt}_call_clear_request TTCN-3 test cases pass.
Change-Id: I3ad4a99757878de3796027325627c87d9a4e93f1
Related: Id16969fe0de04445d1320a96d35cf1d48cc8cf09
Related: SYS#5340
The msc_vlr_tests verify whether any of the tests run contain msgb or
talloc memory leaks. So far they did so by fixating a specific number of
talloc blocks, which may break by library implementations changing.
Instead, verify that the test leaks no allocations by comparing talloc
blocks before and after each test.
When a leak is detected, print the full talloc report to stderr, which
makes the expected output mismatch the actual output and fails the test.
Related: OS#4311
Change-Id: I8537fa76d460c951302932a1bad4299f7fe398c9
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c
This patch served for a manual testing counterpart for osmo-bsc to implement
MSC pooling.
This enables a basic MSC pooling setup, but for a production setup, osmo-msc
would still lack various features related to unloading subscribers to another
MSC as explained in 3GPP TS 23.236.
Change-Id: Iafe0878a0a2c8669080d757b34a398ea75fced36
There is an invalid Mobile Identity in the msc_vlr_test_gsm_ciph test data.
This became apparent when applying the new osmo_mobile_identity API (in a
following patch). Current Mobile Identity API ignores the error.
Change-Id: Ib1d54c59acc8b716de471ca275f54f9d22da3574
Since the split of OsmoNiTB, OsmoMSC does not deal with the radio
access network directly. Therefore the only purpose of T3212 is to
control subscriber expiration in the local VLR. The timeout value
indicated in System Information Type 3 needs to be configured
separately in the BSC/RNC.
This means that we don't need to store it in deci-hours anymore.
Let's move T3212 to the group of VLR specific timers, so it can
be configured and introspected using the generic 'timer' command,
and deprecate the old '[no] periodic location update' command.
It should be also noted that in the old code subscriber expiration
timeout was actually set to twice the T3212 value plus one minute.
After this change, we apply the configured value 'as-is', but
keep the old behaviour for 'periodic location update' command.
Change-Id: I9b12066599a7c834a53a93acf5902d91273bc74f
In order for osmo-hlr to be able to 100% guarantee distinct INDs for CS and PS,
set CN-Domain = CS in all SendAuthInfo Requests.
In Milenage auth, it is highly desirable that osmo-hlr guarantees use of
distinct INDs for CS and PS domains. If an MSC and SGSN attached at the same
time use the same IND bucket to generate Milenage SQN, that collision would
rapidly waste SQNs and load osmo-hlr with requesting new auth tuples on each
CS/PS Complete-Layer3.
So far, osmo-msc did not indicate the CN domain in the GSUP SendAuthInfo
Request, which was neither required nor evaluated. The CN-Domain is only sent
for the UpdateLocation Request that usually follows later.
Related: OS#4318
Change-Id: I22f44068268e62801cadbf6542efaf153423cd65
Substantial parts of the CC / MNCC call establishment were so far completely
missing from the msc_vlr_test_call.c tests. With my new insights on CC and MNCC
procedures, complete the tests.
Root reason: since I am going to re-order the sequence of events to enable
codec negotiation via SDP in MNCC, I want to have comprehensive tests of the CC
procedures to see the effect as diffs in the test output.
Change-Id: Ie995e264eb1e3dd9558a1753ff6f9b55c1d084e1
If an incoming MNCC_SETUP_REQ ends up in Paging (as usually it does), the early
return so far skipped logging of that MNCC message. Add this logging.
Change-Id: I1495dd562a06cf6c1e9453a1fe111bdf8f4be081
So far, the logging said only "RAN encode: BSSMAP: DTAP", but not *which* DTAP
message, which is in fact a very interesting detail when reading osmo-msc logs.
Change-Id: I0cb8d1e3307737ffe53730c64bb984adacedb2da
For all CC type transaction logging, log the current trans->cc.state string for
all LOG_TRANS*() logging.
Change-Id: I67be12c74c679ce684f8c0b9b4e0d96299849dc6
We sometimes see errors like
libmsc/msc_a.c:361 msc_a(...){MSC_A_ST_RELEASING}: transition to state MSC_A_ST_RELEASING not permitted!
i.e. changing state to the state msc_a is already in.
Ignore re-entering the same state for most state changes. However, there is one
state change in msc_a where re-entering the MSC_A_ST_VALIDATE_L3 is necessary
to start the timeout.
Hence add msc_a_state_chg_always() and use that for re-entering
MSC_A_ST_VALIDATE_L3. Change msc_a_state_chg() to skip no-op state changes.
This should silence all no-op state change error messages for msc_a.
Related: OS#4169
Change-Id: I0c74c10b5fa7bbdd6ae3674926cc0393edf15a35
To not break the msc_vlr tests by new GSUP IEs added to some of the GSUP
messages, make msc_vlr_tests only match the start of the GSUP message and not
care about extra IEs. The extra IEs are anyway seen in the expected logs.
The reason to drop the msgb_eq_data_print() is because it is useless for
mismatching lengths. It will always print only the length mismatch, instead we
need to be able to compare with what was expected.
Change-Id: I38d51eeafab04ece83e4bb87bfaa967506f97b11
Neels Hofmeyr
Vadim Yanitskiy
Pau Espin
Max
Oliver Smith
Harald Welte
Philipp Maier
Keith Whyte
Martin Hauke