When we got a clear request we did not clear the internal
association between the gsm_subscriber_connection and the SCCP
part. When we got a DTAP message before the CLEAR COMMAND we
will end up in a crash as the ->bts pointer of the connection
has been cleared.
#0 bsc_scan_msc_msg (conn=0xde178, msg=<value optimized out>) at osmo_bsc_filter.c:258
#1 0x000112c8 in bsc_handle_dt1 (conn=0xdebd8, msg=0xd1f58, len=<value optimized out>) at osmo_bsc_bssap.c:507
#2 0x00010208 in msc_outgoing_sccp_data (conn=<value optimized out>, msg=0xdfacc, len=858696) at osmo_bsc_sccp.c:73
#3 0x0003c110 in sccp_system_incoming (msgb=0xd1f58) at sccp.c:1064
Remove the separation of half-rate and full-rate AMR. The used rate
can be found inside the AMR payload. The signalling of what kind of
traffic channel is used can be done with the GSM 08.08 Chosen
Channel IE in the Assignment Complete message.
This way I can use a fixed payload type in the MGCP GateWay but
have a mixed TCH/F and TCH/H config. E.g. use TCH/F FR3 for some
subscribers when connected to MSC A but use AMR5.9 on a TCH/F for
MSC B when all TCH/Hs are gone.
When the CRCX 200 is lost on the way to the CallAgent we will
get another CRCX (retransmission) which was answered with a 400.
Change the code to extract the CallID, Mode and the optional
LocalOptions first. Then check if the endp is allocated with the
same call identifier, in that case return the current session
information.
The SDP file for FreeSWITCH should contain o= (Origin) and the
t= (Timing) for the session. The data of the Origin should be
globally unique but this is not the case yet. We will need to
store the (NTP) time of the creation of the endpoint.
Move the regexp parsing code from the NAT to libcommon as it will
be used by the NAT and BSC code. This also adds the #include <regex.h>
include to gsm_data. This header should be split up.
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
This patch modifies openBSC code to use msg->dst which stores the
pointer to the signalling link structure instead of the pointer to
the transceiver structure.
This patch prepares the introduction of libosmo-abis.
It is possible that MNCC sends a MNCC_LCHAN_MODIFY and
wants a channel mode that is not possible on the current
lchan, in that case a new channel is assigned. We now crash
as the osmo-nitb is not having an assignment complete handler,
add a NULL check.
The Nokia metrosite BTS seem to keep the channels open indefinitely.
If osmo-nitb is restarted while one of the channel was still active
and tries to activate that channel again the bts would return a
CHANNEL ACTIVATE NACK with "Radio channel already activated". This
accumulated over the restarts so soon enough no more channels were
available.
This patch sends a release request to the bts so the channel
becomes available again.
The function lchan_alloc only considers lchans to be available if both
the type and state are NONE. So change show lchan to list all lchans
that are not considered available.
This will cause the remote end to read 0 bytes, which is interpreted as
if we cleanly closed the socket, making the remote end close their side
of the socket, which would lead to us closing our side of the socket,
so we should never send such a packet.
The timer callback will simply reset the lchan state to NONE in order
to prevent channels getting stuck in 'activation requested' or
'deactivation requested' states.
During the GSM deployment in the CCC Camp, Daniel Willmann
noticed that the LCR and the MNCC were closing the local
connection over unix sockets communication quite so often.
After some debugging, Peter Stuge noticed that openBSC was
closing the connection since write was returning 0.
Then, I suggested that it could be a malformed message with
zero length. By skipping empty messages, Peter confirmed that
the connection between the LCR and the MNCC was not closing
anymore. However, there was no voice in the calls that went
over MNCC.
After some more debugging I found that we were not building
GSM_TCHF_FRAME over MNCC appropriately in the TRAU multiplexer
code, since we forgot to msgb_put() the message.
Scenario: BTS are configured and working, then the BSC stops working
for some reason (crash or administrative stop).
If the BSC comes back to life, LAPD among other things does not know
about the previous existing TEIs. Instead of ignoring these frames,
we notify the driver that we are seeing frames with unknown TEIs, so
it can try to recover, e.g. by resending the SABM message.
Running the entire bts_nokia_site.c through the 'Lindent' script
to match indent/coding style with remainder of project.
There are still lots of other cleanups pending, but this one is
a purely cosmetic one.
DAHDI creates one device node for every E1 timeslot, starting from '1',
and keeps incrementing that number even for additional ports/cards.
Thus, we have to use the e1inp_line number multiplied by 31 as a base.
The byte ordering is a bit odd: The least significant byte is ahead of
the most significant byte, different from everything else in GSM that
seems to be big-endian.
Thanks to Seungju Kim <admin@manateeshome.com> for repoerting the bug.
This fixes a bug introduced more than one year ago in commit
e38bd6caa34005816a9336f021fd17d328d5c901:
The RSL_IE_CHAN_IDENT is a TLV, but the GSM48_IE_CHANDESC_2 contained in
it, is a mere TV type IE with fixed length.
The problem specifically has caused problems on Nokia MetroSite BTS,
which apparently read the TSC out of this Layer3 IE.
The MS Radio Access Capability IE can be _very_ long in some recent
high-end mobile phones, way beyond the old 14-byte limit. We increase
our array to 52 bytes, and make sure not to overflow that buffer.
It was possible to set the LAC=0 on a subscriber that just has
done a LU because it did not respond to a paging request.
E.g. when a phone is rebooting, a SMS being delivered, the phone
is doing the LU, sub_ready_for_sm will try to send a SMS (but the
phone is not ready yet and it will timeout), then the paging code will
send us an expiration note and we might set the LAC=0 for this
subscriber.
Ideally we would be able to stop the paging request once the subscriber
is authenticated and then hand this to the SMS layer, right now the
best thing to do is to detect that we will run into this problem and
not send the SMS, not try to set the LAC=0.
When the BSC is refusing to open an outgoing connection the SCCP
connection was leaked. Use the normal free as the socket should
be either closed or disconnected.
Reset the BTS MO State on BTS bootstrap. This way we will always
test the BTS disconnect/reconnect case of the BTS.
Do not reset the administrative state of objects. The BSC might
have set these and wants to maintain them across disconnect/
reconnect. Right now this is true for the TRX state.
We want to compare the file more_magic[0] and more_magic[1]
with the static more_magic array to see where the difference
is.
src/ipaccess/ipaccess-firmware.c +64 ipaccess_analyze_file(26) warn: buffer overflow 'firmware_header->more_magic' 2 <= 2
src/ipaccess/ipaccess-firmware.c +64 ipaccess_analyze_file(26) warn: buffer overflow 'firmware_header->more_magic' 2 <= 3
* net.location to get/set the geographical location of the network
format is <tstamp>,<lat>,<lon>,<height>
* per trx rf_locked command (net.bts0.trx0.rf_locked)
* network-wide rf_locked command (net.rf_locked)
These commands are installed in controlif_setup. Query them like this:
"rate_ctr.<interval>.<counter group>.<index>.<counter name>" for rate
counters and "counter.<counter name>" for regular counters. <interval>
may be either "abs" for absolute values or one or
"per_{sec,min,hour,day}".
It is possible to query all rate counters in a group (regardless of
index) or all counters in a group and with a certain index if you omit
<counter name> and <index> or just <counter name>.
due to a missing return statement, we ran into the 'reject' case
of bssmap_handle_cipher_mode(). Due to another bug in libosmocore,
the reject message was corrupted (fixed in libosmocore commit
0c83670a595a278b7d1fb7b21b2eacab84d3c031)
Daniel Willmann
Harald Welte
Dieter Spaar