This patch separates BSS side from SGSN side TLLI/PTMSI tracking. When
TLLI/PTMSI patching is not enabled, the corresponding states shall be
identical. The TLLI/PTMSI state has been moved into the struct
gbproxy_tlli_state and is used twice in gbproxy_tlli_info.
Since the state handling for uplink and downlink messages is
diverging, gbprox_update_state() is replaced by two functions
gbprox_update_state_dl/gbprox_update_state_ul and
gbprox_process_bssgp_message() is replaced by
gbprox_process_bssgp_dl/gbprox_process_bssgp_ul.
Sponsored-by: On-Waves ehf
Don't replace the current TLLI immediately, store it in an additional
'assigned_tlli' field and discard the old TLLI when both sides have
used the new one (see GSM 04.08, 4.7.1.5).
Add an Attach Complete message to test and check, whether the related
field of the corresponding tlli_info struct are set as expected
during the local TLLI validation cycle.
Sponsored-by: On-Waves ehf
Currently the enable_patching field in tlli_info is not updated,
when an IMSI is assigned to a TLLI that is already known.
This patch fixes this in gbprox_update_state() after the call to
gbprox_update_tlli_info().
The number of APN increases and the test output file is updated
accordingly.
Sponsored-by: On-Waves ehf
GSM 24.008 also allows a P-TMSI field in Detach request messages.
This patch adds gbprox_parse_gmm_detach_req() to parse Detach Request
messages which sets the ptmsi field if the IE is present.
In addition, when power_off is set to 1 (MO only), the
invalidate_tlli field is set, since Detach Request message is
expected in this case.
The second detach test (see 'RA update') is modified to use
power_off instead of relying on a Detach Accept from the network.
To make this work, the PTMSI of the RA Update Accept is fixed to
match the TLLI of the Detach Request.
Sponsored-by: On-Waves ehf
Add a separate function to clear the IMSI filter to be used instead of
gbprox_set_patch_filter(cfg, NULL, ...). Albeit it fixes a Coverity
issue (Unchecked return value), it is a false positive, since the
return value is always 0 in these cases. Nevertheless it is more
obvious what happens when an explicit clear function is called. Using
NULL as filter argument of gbprox_set_patch_filter still clears the
filter.
Fixes: Coverity CID 1231255
Sponsored-by: On-Waves ehf
This patch modifies the code to pass a pointer to the tlli_info
around once it has been acquired. To achieve this,
gbprox_register_tlli() and gbprox_update_state() are modified to
return it (if it has been found or created), and gbprox_patch_llc(),
gbprox_patch_bssgp(), and gbprox_update_state_after() are modified to
take it as parameter.
Add a new function gbprox_touch_tlli() to update timestamp and list
ordering for existing tlli_infos.
The motivation behind this patch is to make the tlli_info available to
the patching code and to avoid repeated searches for the same TLLI.
Sponsored-by: On-Waves ehf
The current implementation of this function is O(N), where N is the
number of entries.
The new implementation is O(D), where D is the number of entries that
are going to be deleted.
Sponsored-by: On-Waves ehf
Currently time() is called at several places to control TLLI aging.
Beside calling time() more often than necessary, the decision which
timesource is to be used is coded into the TLLI handling, and testing
complex aging scenarios is cumbersome.
This patch passes the current time as a parameter instead. The call
to time() is moved to gbprox_process_bssgp_message().
Sponsored-by: On-Waves ehf
This patches removes the call to gbprox_remove_stale_tllis()
from gbprox_register_tlli(), so it must be called explicitly now.
The call is now done from within gbprox_update_state_after().
In addition, the TLLI cache size counter is also kept in sync when
gbprox_remove_stale_tllis is called manually. The call to
gbproxy_peer_free() in gbproxy_peer_free() is moved behind the TLLI
to allow for counter updates in gbprox_delete_tlli().
Sponsored-by: On-Waves ehf
This patch refactors that function by separating the actual patch
code into a new function gbproxy_patch_bssgp(), similar to
gbproxy_patch_llc(). The remaining function is renamed to
gbproxy_process_bssgp_message. The existing function
gbproxy_parse_bssgp_message() is renamed to
gbproxy_process_bssgp_message to match gbproxy_parse_llc.
Sponsored-by: On-Waves ehf
This adds a test for gbprox_set_patch_filter() and
gbprox_check_imsi().
It also fixes the masking of the type field when IMSIs are checked by
using GSM_MI_TYPE_MASK (0x07) instead of 0x0f.
Sponsored-by: On-Waves ehf
Currently only TLLIs for which it is known that they may be patched
are put into the TLLI list.
This patch changes this to add TLLIs even when the IMSI is not yet
known. A enable_patching flag is added to the gbproxy_tlli_info
structure to control patching.
Note that this puts every active TLLI into the list where accesses
are O(N) currently.
Sponsored-by: On-Waves ehf
This adds parsing support for the following messages:
- Attach Request: IMSI/PTMSI
- Identity Response: IMSI/PTMSI
- BSSGP: Optional TLLI IE
- BSSGP/PAGING_PS: PTMSI
A new new_ptmsi_enc field is added for newly assigned PTMSI in
SGSN->BSS messages (instead of ptmsi_enc). The ptmsi_enc field is now
used for informational PTMSI IE in messages.
Sponsored-by: On-Waves ehf
This adds a gbprox_parse_bssgp_message() function that contains the
parsing part of the former gbprox_patch_bssgp_message(). This
includes a call to gbprox_parse_llc().
The calls to gbprox_patch_llc(), gbprox_update_state() and
gbprox_update_state_after() have therefore been moved to
gbprox_patch_bssgp_message().
Sponsored-by: On-Waves ehf
This patch unifies the TLLI tracking for all LLC messages. The TLLI
state handling is moved into separate functions.
Only Detach Accept messages are taken into account to release a TLLI,
which is safe but not optimal.
Sponsored-by: On-Waves ehf
Currently, parsing and optionally patching is done in the same
functions (e.g. gbprox_patch_gmm_attach_req()).
This patch moves the patching code out of these functions into
gbprox_patch_llc() and just stores pointers to the relevant data
areas into parse_ctx. Consequently the len_change parameter is
removed and the _patch_ in the function's names is renamed to
_parse_. In addition, the patching_is_enabled checks and counter
increments are moved out of these functions, too.
Sponsored-by: On-Waves ehf
Currently gbprox_register_tlli() is a rather complex function.
This patch splits it into several smaller functions to ease reviewing
and maintaining it.
Sponsored-by: On-Waves ehf
This adds a unit test for gbprox_register_tlli() and
gbprox_remove_stale_tllis().
The dump_peers() function is extended by a cfg parameter to support
a non-global gbproxy_config.
Done with Jacob
This comparison bit-ored the TLLI with 0xc000 instead of 0xc000000.
Since this has never worked properly yet and since normalizing to
local TLLIs doesn't seem sensible here, the comparison is removed
entirely.
Sponsored-by: On-Waves ehf
In these functions we assume that peer is not NULL. Add a compiler
attribute in the hope that either coverity or GCC/Clang will help
us to find a misusage.
Done with Jacob
Global state prevents us from writing simple units tests for
single routines. Go through the code and add pointers to the
gbproxy configuration. Only the vty and the test code remain
using the global gbproxy instance.
We intend to move some of these routines to libosmocore but to avoid
a feature symbol clash we are prefixing these routines with gprs_.
Done with Jacob
The application is called gbproxy but the structures and functions
were inconsistently named as either gbprox or gbproxy. Rename all
structures to use gbproxy.
Done with Jacob
Move the global data into the struct and use it. gbprox_reset will
first free data and then re-initialize the structure. This code is
used by the unit test.
Done with Jacob
This commit moves the fixing code of the length field of the LLC
information element to the BSSGP patching level since that is not a
part of LLC itself.
Sponsored-by: On-Waves ehf
This commit adds code to parse the PTMSI in network originated
messages
- Attach Accept,
- Routing Area Update Accept, and
- P-TMSI Reallocation Command (see below)
to keep track of the TLLI identifying the LLC connection.
The P_TMSI Realloc Command specific code is not being tested yet, so
a corresponding notice is logged when such a message will be
received.
NOTE:
The gbproxy will lose the TLLI when the MS doesn't receive/use
the message (normally the SGSN remembers the old TLLI for some time
to avoid this kind of problem). If this happens the MS will
probably restart the procedure and the network will have to answer
again eventually using one of the above messages which will
re-associate the IMSI with the TLLI before the MS can send a
PDP Context Request message.
Ticket: OW#1192
Sponsored-by: On-Waves ehf
Add a struct containing context information from the parts of the
message that have been parsed already. A pointer to this (temporary)
struct is passed to parse/patch functions.
Sponsored-by: On-Waves ehf
Currently the patching code directly accesses the single bytes to
parse the LLC/DTAP messages.
This patch uses the shift functions instead to parse tlv and similar
structures.
Sponsored-by: On-Waves ehf
This adds a set of function that parse a single tlv, lv, tv, or v
encoded information element. They are complementary to the *_put
functions defined in libosmocore's tlv.h file. The functions update
the data and data_len fields unless they are a 'match' function and
the tag field doesn't match.
Sponsored-by: On-Waves ehf
Currently the enabled_tllis_count field isn't always decremented when
an element is removed from the TLLI cache list.
This patch adds the missing update and also adjusts the counter
accordingly.
Sponsored-by: On-Waves ehf
Add TLLI cache output to gbprox_dump_peers() to include this info
into the test output.
Separate RA Update Req message handling from Attach Request handling.
Note: There is no test case for the P-TMSI Reallocation Command yet.
Sponsored-by: On-Waves ehf
This commit adds the following counters:
- attach-reqs: Number of Attach Request messages
- attach-rejs: Number of Attach Reject messages
- tlli-cache: Size of the TLLI cache
Sponsored-by: On-Waves ehf
These commands manage the TLLI list used to decide whether an APN
shall be patched or not. Note that this list is (currently) only
maintained if IMSI matching is used.
VTY commands (enable node):
show gbproxy tllis show all TLLI entries
delete-gbproxy-tlli NSEI stale purge all stale entries
delete-gbproxy-tlli NSEI imsi IMSI purge entry with the IMSI given
delete-gbproxy-tlli NSEI tlli TLLI purge entry with the TLLI given
Sponsored-by: On-Waves ehf
This patch adds IMSI/TLLI connection tracking and uses it to control
APN patching based on the IMSI. TLLI entries can expire based on age
and/or by limiting the TLLI list size.
VTY config-gbproxy:
no core-access-point-name disable APN patching
core-access-point-name none remove APN if present
core-access-point-name APN replace APN if present
core-access-point-name none match-imsi RE remove if IMSI matches
core-access-point-name APN match-imsi RE replace if IMSI matches
tlli-list max-age SECONDS expire after SECONDS
no tlli-list max-age don't expire by age
tlli-list max-length N keep N entries only
no tlli-list max-length don't limit list length
RE is an extended regular expression, e.g. ^12345|^23456
Ticket: OW#1192
Sponsored-by: On-Waves ehf
Currently, all patching state is stored globally in the gbproxy. Thus
the feature cannot be used safely with a concentrating gbproxy (NAT).
This patch moves the state and relevant counters to the gbprox_peer
structure. It adds code to resolve the corresponding peer when
packets are received by looking at BVCI, NSEI, and BSSGP IEs (BVCI,
RAI/LAI/LAC) when the peer is not passed to the
gbprox_patch_bssgp_message() function.
Test cases are also added for the SGSN->BSS case including test cases
with invalid identifiers.
Note that this patch should make it possible to use RAI patching at a
NAT gbproxy as long as the messages are not encrypted.
Ticket: OW#1185
Sponsored-by: On-Waves ehf
Patch the APN in every 'Activate PDP Context Request' message to the
value given by the 'core-access-point-name' command. If the command is
given without an APN, the whole APN IE will be removed. If the
command is being prefixed by a 'no', the APN IE remains unmodified.
The patch mode 'llc-gsm' is added to selectively enable the patching
of LLC session management messages. This is enabled implicitely by
the patch mode 'llc'.
Note that the patch mode should not be set to a value not enabling
the patching of LLC GSM messages ('llc-gsm', 'llc', and 'default' are
sufficient to patch 'Activate PDP Context Request' messages).
Ticket: OW#1192
Sponsored-by: On-Waves ehf
This patch extends the BSSGP patch code to also patch LLC information
elements along with MCC/MNC patching support for the following messages:
- Attach Request
- Attach Accept
- Routing Area Update Request
- Routing Area Update Accept
- P-TMSI reallocation command
Note that encrypted packets will not be patched.
Ticket: OW#1185
Sponsored-by: On-Waves ehf
This adds a feature to patch the BSSGP MNC/MCC fields of messages going
to and coming from the SGSN. To enable this feature, the gbproxy's
VTY commands 'core-mobile-country-code' and/or
'core-mobile-network-code' must be used. All packets to the SGSN are
patched to match the configured values. Packets received from the
SGSN are patched to the corresponding values as last seen from the BSS
side.
Note that this will probably not work with a gbproxy used for several
BSS simultaneously.
Note also, that MCC/MNC contained in a LLC IE will not be patched.
Ticket: OW#1185
Sponsored-by: On-Waves ehf
This parameter is not used (the methods are always called with an
argument of 1 in the third position). Thus the parameter is removed
completely.
Sponsored-by: On-Waves ehf
Currently the terms 'Routing area code' (RAC) and 'Location area
code' (LAC) are used in several places where 'Routing area
identification' (RAI) or 'Location area identification' (LAI) are
meant in fact.
This patch replaces RAC/LAC by RAI/LAI and 'code' by 'identification'
at these places.
Note that RAI := MCC MNC LAC RAC, and LAI := MCC MNC LAC (see GSM
03.03, sections 4.1 and 4.2).
Sponsored-by: On-Waves ehf
The gbproxy looses NSEI changes on BVC_RESET and then tries to send
later messages to the wrong (not longer existing) destination.
This patch fixes this by updating the peer's nsei field on BVC_RESET.
Ticket: OW#874
Sponsored-by: On-Waves ehf
This checks the behavior of the gbproxy when the BSS peer changes the
NSEI and the NSVCI. It also tests BVC_RESET and other UNITDATA
messages after these changes between BSS and SGSN and vice versa (via
the gbproxy).
Ticket: OW#874
Sponsored-by: On-Waves ehf
This adds the option to delete all BVC peers and/or NS_VC with a
given NSEI with a single command. Static (configured) NS-VC are not
affected. In addition, all connections for this NSEI that can be
deleted by this command can be listed without deleting them by
appending 'dry-run' to the command.
Sponsored-by: On-Waves ehf
Currently such messages lead to a creation of a new peer with the
SGSN's NSEI, which results in echoing the message back to the SGSN.
This patch modifies this by sending a STATUS response (invalid BVCI)
instead back to the SGSN.
Sponsored-by: On-Waves ehf
This adds a test with a UNITDATA SGSN message that is addressed to an
invalid (unknown) BVCI. The test shows, that the message is echoed to
the SGSN.
Sponsored-by: On-Waves ehf
This adds counters that are incremented when errors are detected.
It also modifies the VTY command 'show gbproxy' so that
'show gbproxy stats' shows the counters.
Sponsored-by: On-Waves ehf
Add the unused attribute to peer_free() that isn't used currently.
Change 'RAC' to 'NSEI' in the log message, since the latter has been
examined before the log message is generated.
Sponsored-by: On-Waves ehf
Currently in most places in gb_proxy.c a reference to a NS-VC object
is used where the peer is meant instead. The patch changes this by
using the NSEI instead in these cases.
Sponsored-by: On-Waves ehf
This program tests the gbproxy implementation by passing NS messages
to a modified gbproxy that dumps the resulting messages, signals, and
state.
It focusses on testing abnormal situations like port changes.
Ticket: OW#874
Sponsored-by: On-Waves ehf
The lines 461 and 303 were producing unaligned memory access as
the BVCI was not aligned properly. Introduce a tlvp_val16_unal to
read 16bit from the data, use memcpy to the stack to make sure
that it is working in the aligned and unaligned case.
Instead of direct function calls to individual functions, we now
generate primitives (osmo_prim) and send them to one
application-provided function "bssgp_prim_cb()"
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
When we copy a msgb, we need to make sure the msgb_cb->bssgp_cell_id
pointer points to data in the new message, not in the old message.
Thanks to Dieter Spaar for spotting this.
As we only have one NS-VC between gb_proxy and SGSN, we cannot
forward a NS-BLOCK from the BSS to the SGSN, as it would affect
all other BSS's, too.
Thus, we check if we have an unblocked PTP-BVC in the NSVC to the BSS,
and then issue a BVC-BLOCK towards the SGSN.
This should prevent any further PDU's from the SGSN to be sent to
this BSS.
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
Right now the memcpy with the data will copy data to itself as
the new_msg->data and msg->data are the same due the previous
copying of the header which included copying the list entry..
We allocate a message as big as the current one, then we have to
set all pointers by looking of how far they are away from the
msg->_data and add that to the new pointers.
Also copy the OpenBSC/GPRS specific CB data, also do the same
for calculating the offset to the data... At the end we should
end up with a copy...
Some BSS that connect to the proxy do not continue to perform the
RESET procedure after a timeout. In order to resurrect them, we
simply start a RESET procedure.
As only NS-UNITDATA messages are ever passed into the Gb Proxy,
we need to do the msgb_free() at a much higher point in the calling
stack, i.e. inside the NS protocol layer. This means it is now
the same logic as in OpenBSC itself.
The old idea was to take a msgb from gbprox_rcvmsg() and then
modify it and finally send it all the way down to nsip_sendmsg()
to the remote peer.
However, this introduces memory management difficulties, as we then
have to distinguish three cases:
* msgb was sent to a remote peer
* we sent some error message and need to free the msgb
* we need to make n-1 copies in case of a BSSVC-RESET from the SGSN
So instead we now simply always copy the message if we pass it on.
All messages received by gbprox_rcvmsg() are msgb_free()d in the very
same routine
All messages allocated by tx2peer() or tx2sgsn() are freed after
nsip_sendmsg()
If a PTP BVC is BVC-RESET by the BSS, the PDU contains the
Cell Identifier. We can snoop this into our gbprox_peer structure
for better visualization of each peer in they vty.
In order to reuse the existing bssgp_tx_* functions without pulling
in the dependencies of gprs_bssgp.c, we have to move those functions
to gprs_bssgp_util.c
Furthermore, we can remove gbprox_nsi and replace it with bssgp_nsi,
and we can do proper processing of BVC-RESET messages coming from
the SGSN on the signalling BVC. In that case we need to send RESET
messages to all the BSS.
Jacob Erlbeck
Harald Welte