Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
I broke this test during dev and saw the failure being noticed only in the next
test when DTAP is expected again. Verify success right there, instead.
Change-Id: Ifdde3a6fa5835203c34c40db77761f2e90c0d5ff
Since the logging allocations now also show up in the root context report, some
tests need adjusted talloc checks.
In msc_vlr_tests, also output the number of talloc blocks before tests are
started to show that the number didn't change after the tests.
Change-Id: Iae07ae60230c7bab28e52b5df97fa3844778158e
All that is left in libcommon now are the GSUP and OAP client implementations.
These are duplicated in osmo-sgsn.git and make sense to remain somewhat
separate from libmsc. So now they get their own little lib.
Change-Id: Ic71aa119c233b6a0ae169a5b2a53819903d2be82
Drop tall_bsc_ctx; in mncc_sock_init(), talloc the mncc_sock_state from
gsm_network.
In tests or utils, move from using an extern tall_bsc_ctx to a local root
context pointer.
Change-Id: I92c252be1d1e7634f1653de47d37c99d77d9501c
Apply more concise logging categories in each main scope. The bulk goes to
msc_main.c, obviously, while tests and utils get a slimmed down bunch of
logging categories.
Change-Id: I969a0662ba273f3721b6820d02151b7a5b8014b8
In trans_free(), call subscr_conn_release_when_unused(), so that we are sure to
clean up after the last transaction is done.
This fixes an error where a conn lingered after a CC failure, because that code
path forgot to trigger cleanup.
Rationale: so far we were triggering the release check after each DTAP dispatch
(compl_l3 and "normal" DTAP), which is sufficient for properly closed
transactions. We also need a check for when a timeout clears an erratic trans.
Adjust test expectation of test_call_mo_to_unknown_timeout to show that the
error is now fixed.
msc_vlr_test_reject_concurrency now sees an additional release checking event
when the SMS transaction is done, which is expected and does not affect the
test otherwise.
Related: OS#2779
Change-Id: I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb
These tests helped to debug issue OS#2779. Now that they're here we might as
well keep them.
The test test_call_mo_to_unknown shows that an MS answering to the Release
Request works as it should: the conn is torn down.
The test test_call_mo_to_unknown_timeout currently expects the error: the conn
remains active if the CC Release times out. This bug and the test expectations
will be fixed in I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb.
Change-Id: Ic3c84520bff8c3fc82512d03ff6ab97d21b8fb7a
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
There are a number of bad failures in CC teardown handling we're solving. It
helps to see CC logging in the msc_vlr_tests.
Change-Id: I56ac269d46b48b6b85efad81c4d2343bfc41ea90
Also indicate in msc_vlr_test_gsm_authen.c that we're indeed sending no
capability to do R99 in the Classmark 1 during LU request.
Change-Id: Id79a77ca1f218d55dad21d9dd3de92445fb5d6bf
See also change-id I72a1dbb30e0a39dbf4b81c7e378d5607b62e10d3 in
osmo-ttcn3-hacks.git, which adds a similar test to the MSC_Tests.ttcn suite.
Writing this test helped me fix the issue faster, why not keep it now that it's
there.
Related: OS#2947
Change-Id: Iba56556207cf6e79e6531b0e7dd3eaec28fb5eaa
The code deciding on whether UMTS AKA is used was cascaded and convoluted. By
flattening the decisions, they become easier to read and possibly catch more
weird corner cases / log information more clearly.
- First decide what AKA the RES length reflects.
- Then decide whether all prerequisites for UMTS AKA are satisfied.
- Finally, on UTRAN, turn down the auth if we don't have UMTS AKA, and neatly
log all of the potential causes.
One corner case that should never occur is that the UMTS AKA RES length is
actually the same length as the GSM AKA SRES. If this nevertheless occurs, log
this as an error, though not turning down authentication because of it. (The
effect is that we would favor UMTS AKA when it has a res_len == sizeof(sres)
and would not succeed to GSM AKA. At least the log will tell us why, now.)
Adjust an expected test output, trivial logging difference.
Change-Id: I43f7f301ea85e518bac91f707391a53182e54fab
Instead of just closing down the conn hard, actually feed invalid auth response
data to vlr_subscr_rc_auth_resp() in order to trigger all the actions we want
to see with a failed authentication:
- a GSUP signal that the auth failed,
- a LU reject.
Verify this in new test_wrong_sres_length() in msc_vlr_test_gsm_authen.c.
Note that in gsm48_rx_mm_auth_resp(), the is_r99 flag is falsely derived from
the RES length, which upcoming commit Ib7f7d89a8b9455d2c022d53d74328fa7488577f4
will fix.
Change-Id: I4179a290069ac61d0662de4ec7ca3edb76988899
Switch by vsub->sec_ctx to use the proper Kc for ciphering.
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. The VLR already stores
whether the MS replied with a GSM AKA SRES or a UMTS AKA RES in vsub->sec_ctx.
So far, though, we were always using the UMTS AKA Kc just because the USIM and
core net are capable of it, ignoring the choice the MS might have made in the
Authentication Response.
In msc_vlr_test_gsm_ciph, fix the test expectations to the correct GSM AKA Kc
keys, showing that all of LU, CM Service Request and Paging Response now
support MS choosing GSM AKA in a UMTS capable environment.
Related: OS#2793
Change-Id: I42ce51ae979f42d173a45ae69273071c426bf97c
Even on an R99 capable MS with a UMTS AKA capable USIM, the MS may still choose
to only perform GSM AKA, as long as the bearer is GERAN. In that case, we must
make sure to send the GSM AKA Kc for ciphering.
Add test_gsm_ciph_in_umts_env() to msc_vlr_test_gsm_ciph.c to answer an Auth
Request with a GSM AKA response (see the log stating "AUTH established GSM
security context" after we sent a UMTS AKA challenge).
In the test, show that we currently send the *wrong* Kc, i.e. the UMTS AKA
derived Kc for GERAN, instead of the correct Kc for GSM AKA (which was received
from the HLR in the auth tuples).
Subsequent patch I42ce51ae979f42d173a45ae69273071c426bf97c will fix this and
correct the test expectations.
Related: OS#2793
Change-Id: I85f12a20dcd701e671188e56811ec7b58d84da82
Clearly distinguish between Ciphering Mode Command on GERAN and Security Mode
Control on UTRAN.
Cosmetic: explicitly verify the key strings in the testing code (not only in
the expected output).
Change-Id: Ica93ed06c4c63dc6768736d25231de8068001114
Actually call msc_vlr_set_ciph_mode() and wrap away a_iface_tx_cipher_mode()
and ranap_iu_tx_sec_mode_cmd(). Hence we'll see decisions and errors in
msc_vlr_set_ciph_mode() as well.
Change-Id: Id23bc245d4b5707edcd27c44db272fbb211bf9bd
All functions in the individual msc_vlr_test_*.c files should be static; hence
we would be warned if one of them were unused (forgotten to add to the tests
array).
Change-Id: Ia169c6a1443a48879ab4777e09c2040c48810bf6
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911.
- "Expand VLR tests"
d5feadeee8.
- "Move IMSI into test parameters"
093300d141.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ibcd1cc38f170895305ae176a5574384c74a33939
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
That's a preparation step for properly splitting main function of
different tests in follow-up function.
Change-Id: I68a2e94cf79fcb83286eef981a8d88bdbe10ef69
Related: OS#2864
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
Having while(0) as a body for for() cycle generate too much WTF while
looking at the code while not serving any obvious purpose. Let's just
drop it to avoid confusing developers.
Change-Id: I1f571ec319ff3231fd9acd4066e470476c3b1f78
Related: OS#2864
Don't fail tests using thwart_rx_non_initial_requests() via
OSMO_ASSERT. Instead log extended error which will fail the test
eventually but allows to gather additional info helpful for debugging.
Change-Id: I2607cb1ac60941dbc22fca532ed2b3738bfbcc63
Related: OS#2864
Print the IMSI used for each test. This enables expansion to tests with
several IMSIs in follow-up patches.
Change-Id: I7958608e5136351f7b7c0c57fe79791d989ce9c3
Related: OS#2864
This makes test routines more flexible and allows to easier re-use them
for tests with different IMSIs.
Change-Id: I74d46fdb7e87dc04c6b82a0b6f3ce6bef60bde58
Related: OS#2864
We don't usually put space before in-place increment or decrement. Let's
make code look similar to other Osmocom projects.
Change-Id: I5962431ad16c97e412939dc1b8949f6361a5c26e
in the current implementation we still use osmo-bsc_mgcp, which
has many problems and is also obsoleted by osmo-mgw.
integrate osmo-mgw and re-implement the current switching using
an osmo fsm.
Depends: osmo-mgw Iab6a6038e7610c62f34e642cd49c93d11151252c
Depends: osmo-iuh I3c1a0455c5f25cae41ee19229d6daf299e023062
Closes: OS#2605
Change-Id: Ieea9630358b3963261fa1993cf1f3b563ff23538
According to TS 24.007 Section 11.2.3.2.3, it is possible that uplink L3
messages are duplicated in some scenarios, particularly during
assignment/handover procedure.
To avoid L3 entities from seeing duplicated messages, there's a modulo-2
or modulo-4 message sequence counter, based on which the MSC can detect
and suppress such duplicate messages.
It appears that even our unit tests were wrong in that regard so far.
Rather than manually adjusting each and every message, let's make sure
that the sequence number generation always increments as expected, and
that during matching of incoming messages, sequence numbers are masked
out.
Note: the tests will only pass from libosmocore Change-Id
Iec875a77f5458322dfbef174f5abfc0e8c09d464 onwards, due to
gsm48_hdr_msg_type() being broken in earlier versions.
Change-Id: Id15e399ab7e1b05dcd426b292886fa19d36082b1
Closes: #2908
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
NOTE: Like the previous code, OsmoMSC does *not yet check* whether
the configured cipher is compatible with the MS capabilities as
reported in CLASSMARK! The network hence might choose an algorithm
not supported by the phone. Fixing this is subject to another patch.
Closes: OS#2460
Change-Id: I79a4e2892eb5fbecc3d84e11dceffb7149db264b
The VLR code seems to have the assumption that there is one particular
algorithm to be used, as opposed to one of a set of algorithms.
What's missing is basically to decide when/where to pick the best
algorithm within the capabilities of the phone (classmark) and the
network configuration (net->a5_encryption_mask). So far, libvlr has no
notion of classmark. Rather, libmsc has.
Why does the VLR care about the particular algorithm at all? The VLR
should probably simply decide if it should use encryption or not, and if
so, the MSC will figure which algorithm to use.
Change-Id: I5ed80ca2086560a5975a758ec568a034a9a8ab89
osmo-msc still had large amounts of dead code that came along from
openbsc.git. This commit removes a lot of it, mostly stuff relevant
only to the BSC side of things (or even GPRS).
Change-Id: I247def85da2dc3ec461389fb74414a0d964e7e3c
Related: OS#2528
In I8de7c01f9ea1d66c384e57449c4140186f5ce6c5, libosmocore introduced
shorter names in gsm48_pdisc_names, which has implications on the
expected test output
Change-Id: I4421872a0d609dd50a6b911b928aa5e111d1ad24
Measurement reporting (and the relate feed) are functions of the BSC,
not the MSC. This code should never have been inherited from OsmoNITB
to OsmoMSC in the first place, let's remove it.
Change-Id: I0d57ac214e574e267fa9752daf76566197b9aa64
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
Related: OS#1694
Change-Id: I71cd631704a4dc155c6c752fee2a42cd6e2fa336
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd