This commit also, (for what it is worth) removes a
difference to the same file in openbsc, which I found
while looking for changes that affected SMPP delivery.
This is essentially a "forward-port" of [1]
[1] https://gerrit.osmocom.org/#/c/openbsc/+/3899/
Change-Id: I350c19f5bb70b2656171c096334c2ee83f49df7e
d34ed5768c introduced
comparison of GSM411_RP_CAUSE_MO_NUM_UNASSIGNED with
GSM48_CC_CAUSE_UNASSIGNED_NR
For consistency lets use the GSM411_RP constants
in SMS related code.
Change-Id: Ie54966560f66d2dcde905feb2eb19ef90406acd1
During the last congress, we have noticed that OsmoMSC crashes
on receipt of malformed MM Identity Response messages:
BSSAP
Message Type: Direct Transfer (0x01)
Data Link Connection Identifier
00.. .... = Control Channel: not further specified (0x0)
..00 0... = Spare: 0x0
.... .000 = SAPI: RR/MM/CC (0x0)
Length: 11
GSM A-I/F DTAP - Identity Response
Protocol Discriminator: Mobility Management messages (5)
.... 0101 = Protocol discriminator: Mobility Management messages (0x5)
0000 .... = Skip Indicator: No indication of selected PLMN (0)
01.. .... = Sequence number: 1
..01 1001 = DTAP Mobility Management Message Type: Identity Response (0x19)
Mobile Identity - Format Unknown
Length: 8
.... 1... = Odd/even indication: Odd number of identity digits
.... .111 = Mobile Identity Type: Unknown (7) <-- This makes OsmoMSC crash
[Expert Info (Warning/Protocol): Unknown format 7]
[Unknown format 7]
[Severity level: Warning]
[Group: Protocol]
The value '111'B is not a valid Mobile Identity type, and shall be
considered as reserved according to 3GPP TS 24.008, section 10.5.1.4.
Later on it was discovered that '000'B also crashes OsmoMSC in the same way.
The crash itself is provoked by OSMO_ASSERT(0) in vlr_subscr_rx_id_resp().
Let's keep that assert in there, and make sure that:
- on receipt of MM Identity Response, Mobile Identity type
matches the one in MM Identity Request;
- on receipt of RR Ciphering Mode Complete, Mobile Identity
contains IMEI(SV) if present.
Change-Id: Ica4c90b8eb4d90325313c6eb400fa4a6bc5df825
TTCN-3 test case: I62f23355eb91df2edf9dc837c928cb86b530b743
Fixes: OS#4340
We shall not include additional BCD length octet into the value part
of SM-RP-OA (Originating Address) IE. Instead, there should be
ToA/NPI header (1 octet).
Since we do not get ToN/NPI fields from the VLR/HLR, let's assume
the following default values:
1... .... = Extension: No extension
.001 .... = Type of number: International (1)
.... 0001 = Numbering plan: ISDN/telephone (E.164/E.163) (1)
Change-Id: I0f32e2af0ed2d2fea6addf45efbdfee120c2425d
TTCN-3 test case: Ib467eeca6439bc6cce72293fbb5bb48f6d233db9
Related: OS#4324
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I53ccde96dd3785098df0f7d693c504c8b8302e90
In order for osmo-hlr to be able to 100% guarantee distinct INDs for CS and PS,
set CN-Domain = CS in all SendAuthInfo Requests.
In Milenage auth, it is highly desirable that osmo-hlr guarantees use of
distinct INDs for CS and PS domains. If an MSC and SGSN attached at the same
time use the same IND bucket to generate Milenage SQN, that collision would
rapidly waste SQNs and load osmo-hlr with requesting new auth tuples on each
CS/PS Complete-Layer3.
So far, osmo-msc did not indicate the CN domain in the GSUP SendAuthInfo
Request, which was neither required nor evaluated. The CN-Domain is only sent
for the UpdateLocation Request that usually follows later.
Related: OS#4318
Change-Id: I22f44068268e62801cadbf6542efaf153423cd65
Please note that counter "sms:delivered" assumes "Delivered MT SMS",
but actually counts total number MT SMS delivery attempts. This
change describes its _actual_ (erroneous) behaviour.
Change-Id: I081cf962ce2658ceab02699f3cdee19658d00939
Related: OS#4273
Add a char buffer of 1024 characters length as space for SDP to pass to /
receive from MNCC.
Actually support receiving MNCC without such an SDP tail. The main reason for
this is to avoid the need to adjust the ttcn3 implementation of MNCC: it would
stop working for older osmo-msc.
Older or non-SIP MNCC peers could operate the previous MNCC protocol unchanged
(save the protocol number bump) without having to implement SDP.
The SDP part in the MNCC protocol will be used in upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f.
This patch must be merged at the same time as osmo-sip-connector patch
Iaca9ed6611fc5ca8ca749bbbefc31f54bea5e925, so that both sides have a matching
MNCC protocol version number.
Change-Id: Ie16f0804c4d99760cd4a0c544d0889b6313eebb7
Rationale: in order to add full SDP to the MNCC protocol (upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f), we need to parse and compose SDP
messages. Obviously, libosmo-mgcp-client already contains similar code, but
that is unfortunately heavily glued to the actual MGCP implementation. The
simplest solution is to create this separate implementation, copy-pasting from
the existing libosmo-mgcp-client code as is convenient.
This API is added here to probe whether it works well. When it does, the
intention is to "move it up" to osmo-mgw and overhaul the SDP parsing in our
MGCP client and MGCP server APIs using this same API.
Change-Id: If3ce23cd5bab15e2ab4c52ef3e4c75979dffe931
Do not free the CC transaction when an MT subscriber is already being Paged.
Instead, invoke another paging request, which paging.c will correctly add to
the list of pending paging response callbacks to run.
A ttcn3 test is linked in the related patch (s.b.).
Related: OS#4240
Related: Ieeae6322d4e80893ea3408c6b74bf8e32bea8e46
Change-Id: Idd4537b5f4817d17e5c87d9a93775a32aee0e7be
When the CRCX OK returns an invalid RTP address, abort the call; fixes
MSC_Tests.TC_invalid_mgcp_crash.
The original crash happened when adding this error handling without this commit
I08c03946605aa12e0a5ce8b3c773704ef5327a7a ("fsm: use deferred deallocation" for
osmo-mgw I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3 "fix use-after-free: require
new fsm deferred dealloc, check for term"). With this error handling added,
even though avoiding a crash, the test does not pass yet, because instead of
rejecting the call, it currently composes an Assignment Command without a
Transport Layer Address. Fix that.
Change-Id: I00c3b5ff74c05bcc2b7c39375c33419916a57193
Actually decode the Codec List (BSS Supported) in BSSMAP, in both the Complete
Layer 3 Information and the Assignment Complete messages.
An upcoming patch improves codec negotiation and requires the BSS supported
codecs, which are so far ignored (which is/was a pity as osmo-bsc goes at great
lengths to compose those IEs).
Change-Id: I66c735c79e982388f06b5de783aa584c9d13569e
Substantial parts of the CC / MNCC call establishment were so far completely
missing from the msc_vlr_test_call.c tests. With my new insights on CC and MNCC
procedures, complete the tests.
Root reason: since I am going to re-order the sequence of events to enable
codec negotiation via SDP in MNCC, I want to have comprehensive tests of the CC
procedures to see the effect as diffs in the test output.
Change-Id: Ie995e264eb1e3dd9558a1753ff6f9b55c1d084e1
Use of this flag was dropped when adding inter-BSC and inter-MSC Handover
support, I forgot to remove it.
Change-Id: I5ec78e30eb36fbe78a3f7c46bfa44af5a4eb7bf2
Add voice_call_full.msc, generated from a real 2G<->3G voice call log fed to
msc_log_to_ladder.py.
The idea is to document how the voice call sequence of events changes in
upcoming patches.
Change-Id: I8a907d6a4ece1f3ad78da75a8c3e3e76afd5418d
Add script that reads in an osmo-msc log output and extracts the interesting
information for displaying a sequence chart of voice call log, in mscgen
format.
I want to visualize how the sequence of messages changes across patches. It is
error prone to do it manually, and re-doing the sequence chart for every patch
(and patch rework) would be prohibitively time consuming.
Change-Id: I2e4d8778f7b83dee558517a9b23450b817ee325d
Fix three 'FIXME: ERROR HANDLING' occurences in the code that reacts upon the
MGW providing (or failing to provide) an RTP port for the RAN side. From an
earlier stage of the code, the cleanup for this situation was extremely
complex, and hence the choice was to simply wait for the call to time out and
fail. But since we have implemented safe deallocation of nested FSMs in
libosmocore, the situation has become rather trivial: simply free the CC
transactions, and all the rest will immediately release, and terminate
correctly without crashing.
A ttcn3 test for this is MSC_Tests:TC_invalid_mgcp_crash, which actually also
needs the change to osmo_sockaddr_str_is_nonzero() in preceding patch
I53ddb19a70fda3deb906464e1b89c12d9b4c7cbd, so that a seemingly valid MGCP
message ends up causing a failure in the on_success() branch of
mgcp_client_endpoint_fsm.c.
Change-Id: I8313bed1d782100bebeac7d8fc040557c4cb653e
Also regard an RTP port as invalid if the IP address is 0.0.0.0.
Achieve this by using osmo_sockaddr_str_is_nonzero() instead of
osmo_sockaddr_str_is_set().
Depends: I73cbcab90cffcdc9a5f8d5281c57c1f87b2c3550 (libosmocore)
Change-Id: I53ddb19a70fda3deb906464e1b89c12d9b4c7cbd
libosmo-mgcp-client recently introduced osmo_mgcpc_ep_cancel_notify() to cancel
notification if a notify target FSM deallocates. Use it for sanity in
rtp_stream FSM cleanup, the notify target for endpoint FSMs.
Depends: I41687d7f3a808587ab7f7520f46dcc3c29cff92d (osmo-mgw)
I14f7a46031327fb2b2047b998eae6ad0bb7324ad (osmo-mgw)
Change-Id: I351bb8e8fbc46eb629bcd599f6453e2c84c15015
Since osmo-bsc uses the MGCP client FSMs, it is required to enable this new
feature to guarantee safe operation. The issue is described in detail in commit
logs linked below.
Notably, osmo-msc currently chooses to omit error handling during MGCP events
(marked "FIXME"). An upcoming patch implements this error handling, and would
make osmo-msc vulnerable to crash from unexpected MGCP messages without this.
Deferred FSM deallocation is a more general, simpler approach to
osmo_fsm_term_safely(), so we can switch that off now.
Depends: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78 (libosmocore),
I0adc13a1a998e953b6c850efa2761350dd07e03a (libosmocore)
Related: I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3 (osmo-mgw)
Change-Id: I08c03946605aa12e0a5ce8b3c773704ef5327a7a
Before:
RAN decode: BSSMAP: Rx BSSMAP DT1 COMPLETE LAYER 3
After:
RAN decode: BSSMAP: COMPLETE LAYER 3
This caught my attention while I was writing up a script to parse osmo-msc
logging to produce ladder diagrams.
Change-Id: I387dde8f2eb3edb35d22ce52dc0ed580978dea36
If an incoming MNCC_SETUP_REQ ends up in Paging (as usually it does), the early
return so far skipped logging of that MNCC message. Add this logging.
Change-Id: I1495dd562a06cf6c1e9453a1fe111bdf8f4be081
Fix vty tests that are failing since libosmocore change
Ic225232fbfca49ba868427eaf898e1f6e34e1ca8. If OsmoMSC is built without
IU support, it fails with "cs7-instance-iu" in the config.
Change-Id: Ie56da9167badfd2399b566af91a345103f46c2a1
So far, the logging said only "RAN encode: BSSMAP: DTAP", but not *which* DTAP
message, which is in fact a very interesting detail when reading osmo-msc logs.
Change-Id: I0cb8d1e3307737ffe53730c64bb984adacedb2da
For all CC type transaction logging, log the current trans->cc.state string for
all LOG_TRANS*() logging.
Change-Id: I67be12c74c679ce684f8c0b9b4e0d96299849dc6