Remember if this channel got opened due a paging response and in
that case when we close it down we will call subscr_put_channel
that will try to page the subscriber again. This highlights the
lack of a good subscriber management in the MSC code.
If we have a RF failure between the paging response and the auth
success we will not inform the subscriber layer of the failed paging
and instead just 'drop' the SMS. In case we have not completed the
auth and close the channel we will now send an auth failure.
In contrast to the previous believe we may not have a conn here
as we are still paging for the sub. Instead of printing the BTS
print the lac where we think the subscriber is located.
Follow trans->conn->lchan to the BTS instead of using the BTS that
is guranteed to be NULL in the codepath we have entered here. The
trans->conn should still be there, and the lchan should be valid as
well as we have reordered the clear statements.
Instead of creating the sockets in the RSL code we will do this
in the CRCX_ACK, MDCX_ACK, DLCX_IND signal handler of gsm_04_08.
Introduce a handover signal so we can repatch the RTP sockets in
the gsm_04_08 as well.
We create a loop by not setting trans->callref = 0 before calling
trans_free(), as the latter would again send a MNCC_REL_IND up
the stack.
Also: Fix memory leak in case we try to read from mncc_sock
but socket is just gone.
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
The SS_LCHAN signals now always include the lchan_sig_data. For
the measurement report it will optionally include the measurement
report as well. Attempt to update all handlers of this signal as well
The release might release the lchan we want to send the response
on. Reorder the code to first send the message and then give up
the security operation which might release the lchan.
Start counting the attempts of each paging request and call
the callback with the PAGING_BUSY type when the paging request
timed out but the subscriber was not paged at all. This can
only happen with a huge paging backlog.
In case the system has so many pending paging
We send a LU Accept with the TMSI as the MI. According to the
spec the phone should store this new TMSI and send a TMSI
REALLOCATION COMPLETE to us. We will release the LU then and this
should trigger the release procedure.
In commit 39e2eadc99 a bug was introduced
that used the 'trans' after trans_free() had already been called.
This became visible now when the openbsc+lcr combination was calling
an unknown/invalid telephone number in a MO call, resulting in
a segfault.
Can't declare it in gsm_04_08.h tough ... gsm_cbfn is defined in
gsm_data.h and trying to include that in gsm_04_08 just creates a
huge mess.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
For SAPI=3 on a TCH it might be nice to use the SACH to submit
the message. The api allows to automatically use the SACH if
a message like this is submitted.
For certain messages we will need to call other GSM0808 functions. To
keep the bsc_hack working we will try to send this through the normal
messages first and then fallback to dtap if no handler is registered.
The gsm_04_08.c code is not forced to handle the IPA activation
and channel modify ack anymore. This is done transparently by the
BSC API now.
The implementation of bsc_hack would call subscr_con_free before
the BSC API has had the chance to call gsm0808_clear to try to
release other channels. Fix that by adding a return value.
Do not free the GSM Subscriber Connection when a channel is failing
or if a clear is requested, instead just give up _all_ the channels,
reset them to NULL and free the remaining channels.
* We should create the transaction for SMS, CC on the CM Service Request
but for now we will use a band aid and create a dummy operarion to wait
five seconds for the transaction to be opened.
A channel will be released in case of
* Errors via the clear_request callback...
* no more transactions and operations are going on.
This means that if we do something without a transaction
the channel might be closed down right away. The bug fix
will be to create a transaction/operation.
Do not use the lchan for the paging but operate on the
subscriber_connection, change the signals too to not carry
the lchan but the subscriber connection... the silent call
and vty code still assume there is a lchan inside the
subscriber connection.
With handover and late/early assignment there might be two channels
for one subscriber and only the BSC knows which one to use, so use
the gsm_subscriber_connection everywhere...
Holger Hans Peter Freyther
Harald Welte
Sylvain Munaut